User Guide

QLogic Ethernet and 8 Gb Fibre Channel Expansion
Card (CFFh) for BladeCenter
Product Guide (withdrawn product)
The QLogic Ethernet and 8 Gb Fibre Channel Expansion Card (CFFh) for BladeCenter is installed in the
blade server and allows connectivity to high-speed switch bays. This expansion card provides flexibility for
connecting the blade server to the horizontally oriented BladeCenter H modules in bays 7 and 8 or bays 9
and 10 when using the Multi-Switch Interconnect Module (MSIM).
Figure 1 shows the QLogic Ethernet and 8 Gb Fibre Channel Expansion Card (CFFh).
Figure 1. QLogic Ethernet and 8 Gb Fibre Channel Expansion Card (CFFh)
Did you know?
Installing the QLogic Ethernet and 8 Gb Fibre Channel Expansion Card (CFFh) card in every blade server
in your chassis adds two 1 Gb Ethernet ports and two 8 Gb Fibre Channel ports to each server. Combined
with the two onboard Ethernet ports, this gives you an aggregate total of 4 Gbps of Ethernet bandwidth and
16 Gb of Fibre Channel bandwidth for every server in the chassis. This has the potential of meeting even
the most bandwidth-intensive application needs such as virtualization.
When using the CFFh adapter, you can simultaneously use a CFFv or CIOv adapter to enable additional
I/O support to blade servers such as the HS22 when installed in the BladeCenter H chassis. The innovative
design of the CFFh adapter is designed to work with the CFFv or CIOv adapter to support this combination
workload.
The adapter connects to the midplane directly, without having to use cables or small form-factor pluggable
(SFP) modules. By eliminating these components for up to 14 servers, the resulting savings alone covers
the BladeCenter chassis investment.
QLogic Ethernet and 8 Gb Fibre Channel Expansion Card (CFFh) for BladeCenter (withdrawn product) 1

Summary of content (12 pages)