User Guide

Lenovo IdeaPad S110 Hardware Maintenance Manual

Thermal module

For access, remove these FRUs in order:

• “Battery pack” on page 31

• “Keyboard” on page 32

• “Base cover” on page 34

Figure 11: Removal steps of thermal module

Remove the four screws . Detach the connector in the direction shown by

arrow . Lift and remove the thermal module in the direction shown by

arrow .

When installing: Make sure that the thermal module connector is attached

firmly to the system board.

Step Screw (quantity) Color Torque

M2.0 × 3.0 mm, flat round-head,

nylon-coated (4)

Black 1.35 kgfcm