Lenovo IdeaPad S410 Hardware Maintenance Manual
Note: Before using this information and the product it supports, be sure to read the general information under “Notices” on page 75. First Edition (July 2013) © Copyright Lenovo 2013. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
Contents About this manual........................................iv Safety information.........................................1 General safety ...................................................... 2 Electrical safety .................................................... 3 Safety inspection guide ...................................... 5 Handling devices that are sensitive to electrostatic discharge......................................... 6 Grounding requirements ...................................
About this manual This manual contains service and reference information for the following Lenovo product: Lenovo IdeaPad S410 Use this manual to troubleshoot problems. The manual is divided into the following sections: • The common sections provide general information, guidelines, and safety information required for servicing computers. • The product-specific section includes service, reference, and product-specific parts information.
Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14 1
Lenovo IdeaPad S410 Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4.
Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges. Do not use such kind of mat to protect yourself from electrical shock.
Lenovo IdeaPad S410 Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage.
Safety information Safety inspection guide The purpose of this inspection guide is to assist you in identifying potential unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service personnel from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-Lenovo features or options not covered by this inspection guide.
Lenovo IdeaPad S410 Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1.
Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds. Metallic parts or metal flakes can cause electrical shorts.
Lenovo IdeaPad S410 Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short-circuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery.
Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack. Use of an incorrect battery can result in ignition or explosion of the battery. La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau.
Lenovo IdeaPad S410 Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery.
Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au moins quinze minutes.
Lenovo IdeaPad S410 Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der Spannungswandlerplatine umgibt, nicht entfernen.
Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
Lenovo IdeaPad S410 Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products.
Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz.
Lenovo IdeaPad S410 Hardware Maintenance Manual Important service information This chapter presents the following important service information: • “Strategy for replacing FRUs” on page 16 – “Strategy for replacing a hard disk drive” on page 17 – “Important notice for replacing a system board” on page 17 • “Important information about replacing RoHS compliant FRUs” on page 18 Important: BIOS and device driver fixes are customer-installable.
Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a system board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one.
Lenovo IdeaPad S410 Hardware Maintenance Manual Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts.
General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • When you replace FRUs, use new nylon-coated screws.
Lenovo IdeaPad S410 Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8.
General checkout Power system checkout To verify a symptom, follow the steps below: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect the AC adapter. 4. Make sure that power is supplied when you turn on the computer. 5. Turn off the computer. 6. Disconnect the AC adapter and install the charged battery pack. 7. Make sure that the battery pack supplies power when you turn on the computer.
Lenovo IdeaPad S410 Hardware Maintenance Manual Perform operational charging. If the battery status indicator or icon does not light on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon is still off, replace the battery pack. If the charge indicator still does not light on, replace the system board. Then reinstall the battery pack. If it is still not charged, go to the next section.
Related service information Related service information This chapter presents the following information: • “Restoring the factory contents by using Recovery Disc Set” on page 23 • “Passwords” on page 24 • “Power management” on page 25 Restoring the factory contents by using Recovery Disc Set When the hard disk drive or solid state drive is replaced because of a failure, no product recovery program is on the new drive. In this case, you must use the Recovery Disc Set for the computer.
Lenovo IdeaPad S410 Hardware Maintenance Manual 7. When all of the data has been copied from the last disc in the set, remove the disc and restart the computer. Note: The remainder of the recovery process is fully automated and no action is required by you. The computer will restart into the Windows desktop several times and you might experience periods when no activity is apparent on the screen for several minutes at a time. This is normal. 8.
Related service information Power management Note: Power management modes are not supported for APM operating system. To reduce power consumption, the computer has three power management modes: screen blank, sleep (standby), and hibernation. Screen blank state If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. You can also turn off the LCD backlight by pressing . To end screen blank state and resume normal operation, press .
Lenovo IdeaPad S410 Hardware Maintenance Manual Lenovo IdeaPad S410 This chapter presents the following product-specific service references and product-specific parts information: • “Specifications” on page 26 • “Status indicators” on page 28 • “FRU tests” on page 31 • “FRU replacement notices” on page 31 • “Removing and replacing an FRU” on page 32 • “Locations” on page 55 • “Parts list” on page 58 Specifications The following table lists the specifications of the Lenovo IdeaPad S410: Table 1.
Lenovo IdeaPad S410 Table 1. Specifications (continued) Feature I/O ports Description HDMI port × 1 USB 2.0 × 2, USB 3.
Lenovo IdeaPad S410 Hardware Maintenance Manual Status indicators The system status indicators below show the computer status: a 28 b
Lenovo IdeaPad S410 Table 2. Status indicators Indicator a Power on b Battery Meaning On (solid white): The computer is powered on. Blinking: The computer is in sleep mode. off: The computer is powered off. On (solid white): The battery has more than 20% charge. Solid amber: The battery has between 5% and 20% charge. Fast blinking amber: The battery has less than 5% charge. Slow blinking amber: The battery is being charged. When battery charge reaches 20%, the blinking color changes to white.
Lenovo IdeaPad S410 Hardware Maintenance Manual Hotkeys The hotkeys are located in the function key row of the keyboard.By pressing the appropriate hotkey, you can change system settings instantly. The following describes the function of each hotkey. Table 4. Hotkeys Hotkeys 30 Description : Mute/Unmute. : Decrease sound volume. : Increase sound volume. : Close active window or program. : Refresh desktop or Web pages. : Enable/Disable the touch pad.
Lenovo IdeaPad S410 FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration. • They are harder to tighten.
Lenovo IdeaPad S410 Hardware Maintenance Manual Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 31. 3.
Lenovo IdeaPad S410 1010 Battery pack DANGER • Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. Figure 1. Removal steps of battery pack Unlock the manual latch a . Slide the spring-loaded latch to the unlocked position to eject the battery pack b. Lift up the inner edge of the battery pack, pivoting it on the outer edge c. Slide the battery pack in the indicated direction to remove it d.
Lenovo IdeaPad S410 Hardware Maintenance Manual Figure 1. Removal steps of battery pack (continued) Open the back cover along the device frame with a flat blade in the direction shown by arrows and then lift the back cover in the direction shown by arrow h.
Lenovo IdeaPad S410 1020 Hard disk drive For access, remove this FRU: • “1010 Battery pack” on page 33 Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damages and permanent loss of data. • Before removing the drive, suggest the customer to backup all the information on it if possible. • Never remove the drive while the system is operating or is in suspend mode. Figure 2.
Lenovo IdeaPad S410 Hardware Maintenance Manual Figure 2. Removal steps of hard disk drive (continued) Remove four screws c and detach the metal frame from the hard disk drive. c c c c Step Screw (quantity) c M3.0 × 3.0 mm, flat-head, nylok-coated Silver (4) Color Torque P/N 3.0 kgfcm 90202855 When installing: Make sure that the HDD connector is attached firmly.
Lenovo IdeaPad S410 1030 DIMM For access, remove this FRU: • “1010 Battery pack” on page 33 Figure 3. Removal steps of DIMM Release the two latches on both edges of the socket at the same time in the direction shown by arrows a, and then unplug the DIMM in the direction shown by arrow b. a a b When installing: Insert the notched end of the DIMM into the socket. Push the DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly fixed in the slot and difficult to be moved.
Lenovo IdeaPad S410 Hardware Maintenance Manual 1040 PCI Express Mini Card for wireless LAN/WAN For access, remove this FRU: • “1010 Battery pack” on page 33 Figure 4. Removal steps of PCI Express Mini Card for wireless LAN/WAN Disconnect the IO board connector a . a Disconnect the two wireless LAN cables (black,white) c, and then remove the screw b.
Lenovo IdeaPad S410 Figure 4. Removal steps of PCI Express Mini Card for wireless LAN/WAN (continued) Remove the card in the direction shown by arrow d . d When installing: • In models with a wireless LAN card that has two antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled 1, and the white cable (2nd) (AUX) into jack labeled 2 on the card.
Lenovo IdeaPad S410 Hardware Maintenance Manual 1050 Fan assembly and Heat Sink assembly For access, remove this FRU: • “1010 Battery pack” on page 33 Figure 5. Removal steps of fan assembly and heat sink assembly Unplug the fan connector in the direction shown by arrow a. a When installing: Make sure that the fan connector is attached firmly to the system board. Remove six screws b and two screws c .
Lenovo IdeaPad S410 Figure 5. Removal steps of fan assembly and heat sink assembly (continued) Lift the fan assembly and heat sink assembly in the direction shown by arrow d. Be careful not to damage the connector.
Lenovo IdeaPad S410 Hardware Maintenance Manual 1060 Keyboard For access, remove these FRUs in order:: • “1010 Battery pack” on page 33 • “1050 Fan assembly and Heat Sink assembly” on page 40 Figure 6. Removal steps of keyboard Remove screws a . a a Step Screw (quantity) Color Torque a M2.0 × 3.0 mm, flat-head, nylok-coated (2) Silver 1.85 kgfcm Push the back of the keyboard in the direction shown by arrow b .
Lenovo IdeaPad S410 Figure 6. Removal steps of keyboard (continued) Lift the keyboard a little c , and then detach the connector in the direction shown by arrow d . c d When installing: Make sure that the FPC connector is attached firmly.
Lenovo IdeaPad S410 Hardware Maintenance Manual 1070 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. • Avoid rough handling of any kind. • In the whole process, make sure not to drop or stack the system board.
Lenovo IdeaPad S410 Figure 7. Removal steps of system board (continued) Remove two screws a , then remove the RJ-45 door. aa Step Screw (quantity) Color Torque a M2 × 3 mm, flat-head, nylok-coated (2) Silver 1.85 kgfcm Remove five screws b . b b b b b Step Screw (quantity) Color Torque b Silver 1.
Lenovo IdeaPad S410 Hardware Maintenance Manual Figure 7. Removal steps of system board (continued) Unplug DC-IN cable connector in the direction c , speakers connector d , disconnect the LCD connector in the direction e , power board connector in the direction f , TP connector in the direction g , LED board connector h . e c d h f g When installing: Make sure that all the connectors are attached firmly. Remove the system board in the direction shown by arrow i.
Lenovo IdeaPad S410 1080 LCD unit For access, remove these FRUs in order: • “1010 Battery pack” on page 33 • “1020 Hard disk drive” on page 35 • “1030 DIMM” on page 37 • “1040 PCI Express Mini Card for wireless LAN/WAN” on page 38 • “1050 Fan assembly and Heat Sink assembly” on page 40 • “1060 Keyboard” on page 42 • “1070 System board” on page 44 Figure 8. Removal steps of LCD unit Remove three screws a and screw b. a b a a Step Screw (quantity) a M2 × 2 mm, flat-head, nylok-coated (1) Black M2.
Lenovo IdeaPad S410 Hardware Maintenance Manual Figure 8. Removal steps of LCD unit (continued) Detach the LCD unit from the upper case.
Lenovo IdeaPad S410 1090 Speakers, base cover, USB board, power assembly and power board For access, remove these FRUs in order: • “1010 Battery pack” on page 33 • “1020 Hard disk drive” on page 35 • “1030 DIMM” on page 37 • “1040 PCI Express Mini Card for wireless LAN/WAN” on page 38 • “1050 Fan assembly and Heat Sink assembly” on page 40 • “1060 Keyboard” on page 42 • “1070 System board” on page 44 • “1080 LCD unit” on page 47 Figure 9.
Lenovo IdeaPad S410 Hardware Maintenance Manual Figure 9. Speakers, base cover, USB board, power assembly and power board (continued) Remove two screws d, and then remove the USB board in the direction shown by arrow e. d d e Step Screw (quantity) a M2 × 3 mm, flat-head, nylok-coated (2) Silver 1.
Lenovo IdeaPad S410 Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. Apply those labels when you replace the base cover. For labels which are not shipped with the new base cover, peel them from the replaced base cover and adhere them to the new one.
Lenovo IdeaPad S410 Hardware Maintenance Manual 1100 LCD front bezel For access, remove these FRUs in order: • “1010 Battery pack” on page 33 • “1020 Hard disk drive” on page 35 • “1030 DIMM” on page 37 • “1040 PCI Express Mini Card for wireless LAN/WAN” on page 38 • “1050 Fan assembly and Heat Sink assembly” on page 40 • “1060 Keyboard” on page 42 • “1070 System board” on page 44 • “1080 LCD unit” on page 47 • “1090 Speakers, base cover, USB board, power assembly and power board” on page 49 Figure 10.
Lenovo IdeaPad S410 1110 LCD panel, LCD cable For access, remove these FRUs in order: • “1010 Battery pack” on page 33 • “1020 Hard disk drive” on page 35 • “1030 DIMM” on page 37 • “1040 PCI Express Mini Card for wireless LAN/WAN” on page 38 • “1050 Fan assembly and Heat Sink assembly” on page 40 • “1060 Keyboard” on page 42 • “1070 System board” on page 44 • “1080 LCD unit” on page 47 • “1090 Speakers, base cover, USB board, power assembly and power board” on page 49 • “1100 LCD front bezel” on page 52 F
Lenovo IdeaPad S410 Hardware Maintenance Manual 1120 Integrated camera For access, remove these FRUs in order: • “1010 Battery pack” on page 33 • “1020 Hard disk drive” on page 35 • “1030 DIMM” on page 37 • “1040 PCI Express Mini Card for wireless LAN/WAN” on page 38 • “1050 Fan assembly and Heat Sink assembly” on page 40 • “1060 Keyboard” on page 42 • “1070 System board” on page 44 • “1080 LCD unit” on page 47 • “1090 Speakers, base cover, USB board, power assembly and power board” on page 49 • “1100 LCD
Lenovo IdeaPad S410 Locations Front view a b c d e f g Integrated camera Wireless module antennas Computer display Power button Touch pad Built-in microphone System status indicators a b c f d g e 55
Lenovo IdeaPad S410 Hardware Maintenance Manual Bottom and Right-side view a b c d e f g h i AC power adapter jack USB 2.
Lenovo IdeaPad S410 Left-side view a b c d e Novo button Fan louvers RJ-45 port HDMI port USB 3.
Lenovo IdeaPad S410 Hardware Maintenance Manual Parts list This section presents the following service parts: • “Overall” on page 59 • “LCD FRUs” on page 65 • “Keyboard” on page 67 • “Miscellaneous parts” on page 69 • “AC adapters” on page 70 • “Power cords” on page 71 Notes: • Each FRU is available for all types or models, unless specific types or models are specified.
Lenovo IdeaPad S410 Overall 1 2 e 20 3 6 4 5 7 9 8 11 10 12 13 (14) a 15 b b 16 c d 17 18 19 59
Lenovo IdeaPad S410 Hardware Maintenance Manual Table 4. Parts list—Overall No. FRU 1 2 3 3 4 LCD unit (see “LCD FRUs” on page 65.) Keyboard (see “Keyboard” on page 67.
Lenovo IdeaPad S410 Table 4. Parts list—Overall (continued) No. FRU FRU no.
Lenovo IdeaPad S410 Hardware Maintenance Manual Table 4. Parts list—Overall (continued) No. FRU 5 5 5 6 ZIUS7 MB 15W 2955U UMA ZIUS7 MB W8P 15W 2955U UMA ZIUS7 MB W8S 15W 2955U UMA Processor, Shark bay ULT, Intel I5-4250U 1.3G 2cBGA CPU Processor, Shark bay ULT, Intel I7-4550U 1.5G 2cBGA CPU Processor, Shark bay ULT, Intel I5-4200U 1.6G 2cBGA CPU Processor, Shark bay ULT, Intel I3-4010U 1.7G 2cBGA CPU Processor, Shark bay ULT, Intel I3-4100U 1.8G 2cBGA CPU Processor, Shark bay ULT, Intel I7-4500U 1.
Lenovo IdeaPad S410 Table 4. Parts list—Overall (continued) No. FRU FRU no. 8 WLAN, NON-INTEL 1X1 BGN+BT4.0, Cbt BCM943142HM 1x1BGN+BT4.0 HMC WLAN WLAN, NON-INTEL 1X1 BGN+BT4.0, Liteon WB225 1x1BGN+BT4.0 HMC WLAN WLAN, NON-INTEL 1X1 BGN+BT4.0, Liteon WB335 1x1BGN+BT4.0 HMC WLAN WLAN, WiFi 1x1 BGN+BT4.0, Cbt BCM943142HM 1x1BGN+BT4.0 HMC WLAN WLAN, WiFi 1x1 BGN+BT4.0, Liteon WB225 1x1BGN+BT4.0 HMC WLAN WLAN, WiFi 1x1 BGN+BT4.0, Liteon WB335 1x1BGN+BT4.0 HMC WLAN WLAN, WiFi 1x1 BGN+BT4.
Lenovo IdeaPad S410 Hardware Maintenance Manual Table 4. Parts list—Overall (continued) 64 No. FRU FRU no.
Lenovo IdeaPad S410 LCD FRUs In Lenovo IdeaPad S410, there are following types of LCDs. • “14.0 -in.
Lenovo IdeaPad S410 Hardware Maintenance Manual 14.0-in. HD TFT Table 5. Parts list—14.0-in. HD TFT No. FRU FRU no. 1 2 ZIUS7 LCD Bezel Silver Panel, 13.3" HD-AG, AUO B133XW03 V1 HW9B AG F LED1 NB LCD Panel,13.3" HD-AG, SDC LTN133AT30-401 HD AG F LED1 NB LCD Panel,13.3" HD-AG, LGD LP133WH2-TLF2 HD AG F LED1 NB LCD Panel,13.3" HD-AG, CMI N133BGE-L31 HD AG F LED1 NB LCD VIUS4 Hinge Left VIUS4 Hinge Right VIUS3 LCD Cable W/Camera Cable VIUS3 Camera Board 1.0M For WIN8 VAUS5 Camera Board 0.
Lenovo IdeaPad S410 Keyboard Table 6. Parts list—Keyboard Language P/N Chicony keyboard S410 Sunrex Indian Czechoslovakian Bulgarian International English Swiss Slovenian Icelandic Belgian Four Nordic countries Hungarian Hebrew Greek Dutch Japanese Brazilian Arabic German French Russian Traditional Chinese Korean Canadian English&French Latin Portuguese Thai Turkish Spanish Italian U.K.
Lenovo IdeaPad S410 Hardware Maintenance Manual Table 6. Parts list—Keyboard (continued) Language P/N Sunrex (continued) keyboard S410 (continued) Darfon 68 Arabic German French Russian Traditional Chinese Korean Canadian English&French Latin Portuguese Thai Turkish Spanish Italian U.K.
Lenovo IdeaPad S410 Miscellaneous parts Table 7.
Lenovo IdeaPad S410 Hardware Maintenance Manual AC adapters Table 8. Parts list—3-pin AC adapters FRU P/N 40W, Delta ADP-40NH B 20V2A adapter-CCC 40W, Liteon PA-1400-12LC 20V2A adapter-CCC 40W, Chicony LN-A0403A3C20V2A adapter-CCC 65W, Delta ADP-65KH BD 20V3.25A adapter-CCC 65W, Liteon PA-1650-56LC20V3.25A adapter-CCC 65W, Chicony CPA-A065 20V3.25A adapter-CCC 65W, Brazil PA-1650-52LB adapter 65W, Delta ADP-65KH B 20V,3.
Lenovo IdeaPad S410 Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region: Table 10.
Lenovo IdeaPad S410 Hardware Maintenance Manual Table 10.
Lenovo IdeaPad S410 Table 10.
Lenovo IdeaPad S410 Hardware Maintenance Manual Table 11. Parts list—power cords 74 Region P/N UK • lux 0031+H03VV-F 0.75/3C+0011 1m Europe • lux 0033+H03VV-F 0.75/3C+0011 1m US • lux 0014+SPT-2 60°C 18/3C+0016 1m China • lux 0036+RVV 300/300 0.75/3C+0002 1m Indian • lux 0046+IS694 0.75/3C+0011 1m Japan • lux 0018(E)+VCTF 0.75/3C+0021 1m Australia • lux 0038+H03VV-F 0.75/3C+0011 1m Taiwan • lux 0019+VCTF 0.75/3C+0021 1m Korea • lux 0033+H03VV-F 0.75/3C+0011 1m Italy • lux 0029+H03VV-F 0.
Notices Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Lenovo IdeaPad S410 Hardware Maintenance Manual Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary.
