User manual

Removing a CD-RW/DVD drive
To remove the CD-RW/DVD drive, complete the following steps.
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 33.
2. Turn off the server and peripheral devices and disconnect all power cords and
external cables.
3. Slide the server out of the rack; then, remove the cover (see “Removing the
cover” on page 37).
4. Press the release tab down 1 to release the drive; then, while you press the
tab, push the drive toward the front of the server.
5. From the front of the server, pull the drive out of the bay 2.
6. Remove the drive retention clip 1 from the drive (held with alignment pins
2).
7. If you are instructed to return the CD-RW/DVD drive, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Chapter 5. Installing optional devices and replacing customer replaceable units 89