T2254pC Flat Panel Monitor User's Guide
Product numbers 60CC-MAR2-WW First Edition (January 2015) © Copyright Lenovo 2015. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
Contents Safety information ...................................................................................................... iii Chapter 1. Getting started ....................................................................................... 1-1 Shipping contents ......................................................................................................................................................... 1-1 Notice for use...................................................................
Safety information General Safety guidelines For tips to help you use your computer safety, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. í © Copyright Lenovo 2015.
Chapter 1. Getting started This User’s Guide contains detailed information on the ThinkVision ® T2254pC Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: · Information flyer · · · · ThinkVision T2254pC Flat Panel Monitor Power Cord Analog Signal Cable Base · Stand Note: To attach a VESA mount, please see “Wall Mounting (Optional)” on page 2-10. © Copyright Lenovo 2015.
Notice for use To set up your monitor, please see the illustrations below. Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure. 1. Place your monitor with the screen face down on a soft flat surface. 2. Align the stand assembly bracket to the monitor. 3. Insert the bracket towards monitor until it locks in place. Note: To install a VESA mount, please see "Wall Mounting (Optional)"on page 2-10.
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. o 5 0o 30 o Swivel With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle. -45o 45o Chapter 1.
Height Adjustment Hold the monitor pull up on both sides, adjust the reasonable height of the monitor. 110mm Monitor Pivot 90o - Adjust height to the top position before rotation the monitor. - Rotate clockwise until the monitor stops at 90°. User controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see “Adjusting your monitor image” on page 2-3.
Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower left corner). Please follow the instructions that came with the cable lock to attach it. Setting up your monitor This section provides information to help you set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information located in the information flyer before carrying out this procedure. 1.
3. Connect one end of the DP cable to the DP connector on the back of the computer, and the other end to the DP connector on the monitor. Lenovo recommends that customers who require to use the Display Port input on their monitor purchase the "Lenovo Display Port to Display Port cable 0A36537". www.lenovo.com/support/monitoraccessories 4. Connect one end of the HDMI cable to the HDMI connector on the back of the computer, and the other end to the HDMI connector on the monitor.
5. Plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2) shall be used.
6. Rotate the head of the monitor into portrait view, push the main clip, and take it down. 7. Open the main clip and place the cables through the main clip, fasten it from right-left.
8. Power on the monitor and the computer. 9. Install the monitor driver, download the driver of the corresponding monitor model from the Lenovo Website: http://support.lenovo.com/us/en/documents/T2254pC, and then click on the driver and install it following the on-screen instructions. 10. To optimize your monitor image, if using the analog cable, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes.
Registering your option Thank you for purchasing this Lenovo ® product. Please take a few moments to register your product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing products and services that are important to you, as well as in developing better ways to communicate with you. Register your option on the followingWeb site: http://www.lenovo.
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use health work habits to maximize your performance and comfort while using your computer.
· Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture. · General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows. The following are some other tips for comfortable viewing of your monitor: · Use adequate lighting for the type of work you are performing.
Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system; others can be purchased through vendors or accessed at: https://lenovo.ssbbartgroup.com/lenovo/request_vpat.
Using the On-Screen Display (OSD) controls The settings adjustable with the user controls are viewed through the On-Screen Display (OSD), as shown below. To use the controls: 1. Press to open the main OSD menu. 2. Use or to move among the icons. Select an icon and press to access the selected function. If there is a sub-menu, you can move between options using or , then press to select that function. Use or to make adjustments then press to save. 3.
Table 2-2. OSD functions OSD Icon Sub menu on Main Menu Description Brightness Adjusts overall screen brightness. Contrast Adjusts difference between light and dark areas. DCR Moves image left or right. Vertical Position Moves image up or down. Manual Color Input Signal Scaling Information Menu Languag Analog (VGA) only Optimizes image (size, position, phase and clock). Manually optimizes the image. See "Manual image setup"on page 3-4.
Table 2-2. OSD functions OSD Icon Sub menu on Main Menu Menu Position Controls and Adjustments Description Adjusts menu location on the screen. Default The menu position to the default settings. Custom • Horizontal: Changes the horizontal position of the OSD. • Vertical: Changes the vertical position of the OSD. Factory Default Resets monitor to the original factory settings. • Cancel • Reset Accessibility Change button repeat rate and menu timeout settings.
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.
Image rotation Before rotating the monitor, you should set-up your computer to rotate the image. Rotating the image may require special rotation software or you may find that your computer is preloaded with video graphic drivers that allows image rotation. Check the Graphic Properties setting on your computer to see if this feature is available. Try these steps to check if image rotation is available on your computer. 1. Right-click on the desktop and click Properties. 2.
For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table 2-4. Power indicator State Power Indicator Screen On Steady green Normal Standby/Suspend Steady amber Blank Restoring Operation Compliance Press a key or move the mouse ENERGY STAR There may be a slight delay before the image reappears. Note: Standby also occurs if there is no image output to the monitor.
Detaching the monitor base and stand step 1: Place the monitor on a soft and flat surface. step 2: Remove the base and stand from the monitor. Wall Mounting (Optional) Refer to the instructions that come with the VESA compatible base mounting kit. 1. Place the monitor face down on a non-abrasive surface on stable flat table. 2. Remove the stand. 3. Attach the mounting bracket from the wall mounting kit to the monitor. 4.
Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model 60CC-MAR2-WW Dimensions Panel Stand Height 371.7 mm (14.63in.) Depth 242.66 mm (9.55 in.) Width 509.3 mm (20.05 in.) Size 22 in.
Table 3-1.
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshootingg Problem Possible cause Suggested action Reference The words "Out of Range" are shown on the screen, and the power indicator is flashing green. The system is set to a display mode which is not supported by the monitor.
Table 3-2. Troubleshootingg(continued) Problem Possible cause Screen is The monitor is in blank and Standby/Suspend power mode indicator is steady amber or flashing green Suggested action . . Reference "Understanding power Press any key on the keyboard or move the mouse management" on Page 2-8 to restore operation. Check the Power Options settings on your computer. The power indicator is green, but there is no image.
4. Use or to select Clock and Phase adjustment. · Clock (pixel frequency) adjusts the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture does not have the correct width. · Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the picture has horizontal disturbances in light picture. 5. When the image no longer looks distorted, press Enter to save the adjustments of Clock and Phase. 6.
Installing the monitor driver in Windows 7 Note: This section must be completed before continuing with the Windows 7 automatic image setup. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Turn off the computer and all attached devices. Ensure that the monitor is connected correctly. Turn on the monitor and then the system unit. Allow the system to boot into Windows 7 operating system. Find the driver of the corresponding monitor model from Lenovo’s website: http://support.lenovo.
Installing the monitor driver in Windows 8/Windows 8.1 To use the Plug and Play feature in Microsoft Windows 8/Windows 8.1,do the following: 1. Turn off the computer, all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 8/Windows 8.1 operating system. 4. Find the driver of the corresponding monitor model from Lenovo’s website: http://support.lenovo.
Getting further help If you still can’t solve your problem, please contact the Lenovo Support Center. For more information on contacting the Customer Support Center, please see Appendix A, “Service and Support,” on page A-1. Service information Product numbers The product number for your monitor is located on the back of the display bezel as shown below.
Service parts The following parts are for use by Lenovo service, or Lenovo authorized dealers, to support the customer warranty. Parts are for service use only. The table below shows information for model 60CC-MAR2-WW. Table 3-3. List of service parts FRU (Field Replaceable Unit) Part number Description Color Machine Type Model (MTM) 00PC018 Monitor_T2254pC Raven Black 60CC-MAR2-WW 00PC019 Signal cable (Analog) Raven Black 60CC-MAR2-WW 00PC020 Stand & Base Raven Black 60CC-MAR2-WW Chapter 3.
Appendix A. Service and Support The following information describes the technical support that is available for your product, during the warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty for a full explanation of Lenovo warranty terms. Registering your option Register to receive product service and support updates, as well as free and discounted computer accessories and content. Go to: http://www.lenovo.
Country or Region Telephone Number Argentina 0800-666-0011 (Spanish,English) Australia 1-800-041-267 (English) Austria 0810-100-654 (For local rate) (German) Belgium Warranty service and support: 02-339-36-11 (Dutch,French) Bolivia 0800-10-0189 (Spanish) Brazil Calls made from within the Sao Paulo region : 11-3889-8986, Calls made from outside the Sao Paulo region : 0800-701-4815 (Portuguese) Brunei Darussalam Dial 800-1111 (English) Canada 1-800-565-3344 (English, French) Chile 800-361-2
Country or Region Telephone Number Egypt Primary: 0800-0000-850 Secondary: 0800-0000-744 (Arabic,English) El Salvador 800-6264 (Spanish) Estonia 372-66-0-800 (Estonian, Russian, English) Finland Warranty service and support: +358-800-1-4260 (Finnish) France Warranty service and support: 0810-631-213 (hardware) (French) Germany Warranty service and support : 0800-500-4618 (toll-free) (German) Greece Lenovo Business Partner (Greek) Guatemala Dial 999-9190, wait for operator, and request to re
Country or Region Telephone Number Korea 080-513-0880 (Collect call) 02-3483-2829 (Toll Call) (Korean) Latvia 371-6707-360 (Latvian, Russian, English) Lithuania 370 5278 6602 (Italian, Russian, English ) Luxembourg ThinkServer and ThinkStation: 352-360-385-343 ThinkCentre and ThinkPad: 352-360-385-222 (French) Malaysia 1-800-88-0013 03-7724-8023 (Standard Charges Apply) (English) Malta 356-21-445-566 (English Italian , Maltese Arabic) Mexico 001-866-434-2080 (Spanish) Netherlands 020-513-39
Country or Region Telephone Number Romania 4-021-224-4015 (Romanian) Russia +7-499-705-6204 +7-495-240-8558 (Standard Charges Apply) (Russian) Singapore 1-800-415-5529 6818-5315 (Standard Charges Apply) (English, Mandarin, Bahasa Malaysia) Slovakia ThinkStation and ThinkServer : 421-2-4954-5555 Slovenia 386-1-2005-60 (Slovenian) Spain 34-917-147-833 (Spanish) Sri Lanka 9477-7357-123 (Sumathi Information systems) (English) Sweden Warranty service and support: 077-117-1040 (Swedish) Switzerl
Appendix B. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk. Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly.
waste disposal contractor certified by a local government. In accordance with the Law for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details, visit the Lenovo Web site at www.ibm.com/jp/pc/service/recycle/pcrecycle/.
Turkish statement of compliance The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (EEE). Türkiye EEE Yönetmeliğine Uygunluk Beyanı Bu Lenovo ürünü, T.C. Çevre ve Orman Bakanlığı'nın “Elektrik ve Elektronik Eşyalarda Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmelik (EEE)” direktiflerine uygundur. EEE Yönetmeliğine Uygundur.