System information

Table 32. Removal steps of LCD unit (continued)
4
4
4
5
5
6
8
7
7
Step Screw (quantity) Color Torque
7 M2 × 4 mm, wafer-head, nylon-coated (2) Black 0.181 Nm
(1.85 kgfcm)
When installing:
v Make sure that you attach the LCD connector firmly.
v Make sure that you route the cables firmly and tape up in the proper
positions as shown in this figure.
v When you route the cables, make sure that they are not subjected to any
tension. Tension could cause the cables to be damaged by the cable guides, or
a wire to be broken.
Removing and replacing a FRU 119