U65C`tfuvq/cbdlvq/gn Qbhf 3 Xfeoftebz- Kvmz 23- 3111 5;1: QN Setup Hardware Requirements This monitor requires a computer with a suitable on-board sub-system or Video Adapter card that can support XGA 1024 × 768, SVGA 800 x 600, or VGA 640 x 480 at 60 Hz. Handling Instructions Do not support the monitor within the screen area. The Liquid Crystal Display is glass and can be damaged by rough handling or excessive pressure. 1. Lift the monitor by placing your hands where indicated below. 2.
Qbhf 4 Xfeoftebz- Kvmz 23- 3111 5;1: QN ENGLISH U65C`tfuvq/cbdlvq/gn FRANÇAIS Adjusting the Monitor Position Viewing Angle ESPAÑOL DEUTSCH You can tilt the screen backward and forward as shown below. Rest Take regular breaks. Vary your posture, stand up and stretch occasionally as prolonged use of computer workstations can be tiring. JAPANESE Back You should sit back in your chair and use the backrest.
U65C`tfuvq/cbdlvq/gn Qbhf 5 Xfeoftebz- Kvmz 23- 3111 5;1: QN Eyesight Working with monitors, in common with any prolonged close work, can be visually demanding. Look away from the screen periodically and have your eyesight checked regularly. Screen settings Set the screen brightness and contrast to a comfortable level. You may have to adjust this as the lighting changes during the day. Many application programs let you select color combinations which can help you to view in comfort.
Qbhf 6 Xfeoftebz- Kvmz 23- 3111 5;1: QN ENGLISH U65C`tfuvq/cbdlvq/gn 1. Turn off your PC and all attached devices. 2. Connect the signal cable to the video port on the back of your computer. This port might be directly attached to your computer (figure A), or it might be part of a video adapter card (figure B). The video port on your computer or video adapter card may be colored blue to match the blue connector on your monitor’s video cable.
U65C`tfuvq/cbdlvq/gn Qbhf 7 Xfeoftebz- Kvmz 23- 3111 5;1: QN Configuring your Monitor Setup Diskette for Windows95 or Windows 98 This section must be completed before continuing with the Windows 95 or Windows 98 Auto Setup on Page 11. To use the Plug and Play feature in Windows 95 or Windows 98, files should be loaded from the IBM Flat Panel Monitor Installation diskette: 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3.
Xfeoftebz- Kvmz 23- 3111 5;1: QN ENGLISH Qbhf 8 FRANÇAIS The AC adapter and signal cable are connected to your monitor. If you wish to change these or to fit a different stand, see Further Help on page 25. Switch on the power source and your computer. 2. Switch on your monitor by pushing and releasing the power switch marked . To switch off your monitor, push and release the power switch again. 3. Turn on the monitor and then the computer. 4.
U65C`tfuvq/cbdlvq/gn Qbhf 9 Xfeoftebz- Kvmz 23- 3111 5;1: QN 14. Choose IBM T54A monitor and select OK. The files will be copied from the diskette to your hard drive. 15. Close all open windows and remove the diskette. 16. Reboot the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.
5;1: QN ENGLISH Xfeoftebz- Kvmz 23- 3111 FRANÇAIS Auto Setup Auto Setup The Setup Utility included on the setup diskette is for displaying do patterns. They do not replace or modify the display dirver. The Auto Setup instructions require the monitor to be warmed up for 15 minutes. This is not required for normal operation. Å When you first use your monitor you must perform Auto Setup.
U65C`tfuvq/cbdlvq/gn Qbhf 21 Xfeoftebz- Kvmz 23- 3111 5;1: QN Auto Setup for DOS You must use DOS when you run DOS Auto Setup. If the monitor is in standby mode (STANDBY ON), it may automatically turn off while you are waiting for it to warm up. If this happens, switch off the monitor and switch it on again after a few seconds. 1. Turn on the monitor first; then the PC. If you are using PC-DOS/V, change to U.S. mode by typing ‘CHEV US’ and pressing ENTER at the command prompt. 2.
Qbhf 22 Xfeoftebz- Kvmz 23- 3111 5;1: QN ENGLISH U65C`tfuvq/cbdlvq/gn Turn on the monitor first; then the PC. Wait approximately 15 minutes, until the monitor warms up. 3. Drag the icon bar and tool bar, if they are displayed, to the bottom of the screen. 4. Insert the diskette labelled ‘IBM Flat Panel Monitor Installation Disk’ into the diskette drive. 5. Check the operating system installed on your PC and follow the instructions from the table below. Operating System Windows 3.1 Windows NT 3.
U65C`tfuvq/cbdlvq/gn Qbhf 23 Xfeoftebz- Kvmz 23- 3111 9. 5;1: QN When finished, the OSD main menu returns. Press the Exit button once to exit from the OSD. 10. Press the ESC key to return to Windows. You have completed the monitor setup for Windows. If you use other operating systems, perform the appropriate AUTO SETUP for those systems, also: see Auto Setup for DOS on page 10.
Manual Setup Normally, you can complete the setup procedure using AUTO SETUP, however, if your screen image is still distorted after you perform AUTO SETUP or the setup diskette does not run on your system, perform MANUAL SETUP. Have your monitor turned on for about 15 minutes, until the monitor warms up. 2. Display the image you most frequently use on the screen. 3. Press the OSD Enter button the initial OSD menu. 4.
U65C`tfuvq/cbdlvq/gn Qbhf 25 Xfeoftebz- Kvmz 23- 3111 5;1: QN Adjusting Your LCD Monitor User controls User control features Icon Control Exit Description Displays the OSD main menu Exits from menus and sub-menus Exits the OSD Left Arrow Displays the OSD main menu Moves the cursor to highlight icons and other options Right Arrow Displays the OSD main menu Moves the cursor to highlight icons and other options OSD Enter Displays the OSD main menu Enters menus and sub-menus and selects the highli
Press the Exit button to move backwards through the sub-menus and exit from the OSD. FRANÇAIS Note: After making adjustments, the Power indicator LED will briefly turn amber to indicate that the new value has been saved. ENGLISH • OSD Lock / Unlock This feature allows you to secure the current control settings, while allowing the user to adjust Brightness and Contrast, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by using the same procedure.
U65C`tfuvq/cbdlvq/gn Qbhf 27 Xfeoftebz- Kvmz 23- 3111 5;1: QN On-screen display (OSD) controls The settings adjustable with the user controls are viewed through the OnScreen Display (OSD). Press any of the OSD buttons to activate the OSD. Analog part: The LCD monitor needs time to become thermally stable the first time you turn it on each day. Thus, to achieve more accurate adjustments for parameters, allow the LCD monitor to warm up (be On) for at least 15 minutes before making any screen adjustments.
U65C`tfuvq/cbdlvq/gn Qbhf 28 5;1: QN Moves the screen left and right or up and down. Description Xfeoftebz- Kvmz 23- 3111 OSD Icon (continued) IMAGE LOCK IMAGE POSITION COLOR Select the Color Mode you find most comfortable and then fine tune the colors using the User Color Mode menu, if necessary. Sub-menu(s) Fine Coarse Manual • • H-Position V-Position Color Mode Controls and Adjustments Use the Arrow buttons to adjust away the interference.
U65C`tfuvq/cbdlvq/gn Qbhf 29 Xfeoftebz- Kvmz 23- 3111 OSD Icon 5;1: QN Description Sub-menu(s) Resets the Brightness, Contrast,Color, Image position, fine and coarse setting. Color & Geometry Controls and Adjustments NO - Does not make the adjustment RESET YES - Resets the colorand geometry. INFORMATION LANGUAGE Shows information about the addressability and the horizontal and vertical frequencies of the images received from the computer or video board.
U65C`tfuvq/cbdlvq/gn Qbhf 2: 5;1: QN Initial appearance of OSD Digital part: Xfeoftebz- Kvmz 23- 3111 The LCD monitor needs time to become thermally stable the first time you turn it on each day. Thus, to achieve more accurate adjustments for parameters, allow the LCD monitor to warm up (be On) for at least 15 minutes before making any screen adjustments. Moves the screen left and right or up and down.
U65C`tfuvq/cbdlvq/gn Qbhf 31 Xfeoftebz- Kvmz 23- 3111 OSD Icon 5;1: QN Description Sub-menu(s) Resets the Brightness and image position setting. Yes/No Controls and Adjustments NO - Does not make the adjustment RESET YES - Reset INFORMATION LANGUAGE Shows information about the addressability and the horizontal and vertical frequencies of the images received from the computer or video board. The language chosen affects only the language of the OSD.
Qbhf 32 Xfeoftebz- Kvmz 23- 3111 5;1: QN ENGLISH U65C`tfuvq/cbdlvq/gn FRANÇAIS Further Information Display modes The display mode the monitor uses is controlled by the computer. Therefore, you should refer to your computer documentation for details on how to change display modes. DEUTSCH The image size, position and shape may change when the display mode changes. This is normal and the image can be readjusted using AUTO SETUP and the monitor controls.
U65C`tfuvq/cbdlvq/gn Qbhf 33 Xfeoftebz- Kvmz 23- 3111 5;1: QN Power Management If your computer has previously been used with a CRT monitor and is currently configured to a display mode outside the range that the Flat Panel monitor can display, you may need to re-attach the CRT monitor temporarily until you have re-configured the computer, preferably to 1024 x 768 at 60Hz.
5;1: QN Troubleshooting Ensure that the electrical outlet and the monitor are both switched on. Check that the power cord is firmly plugged into the electrical outlet and the power supply unit. If the power cord plug has a removable fuse, replace it. Try another power cord. Try another electrical outlet. Screen is blank and power indicator is off No power to monitor Screen is blank and power indicator is steady green Brightness and Contrast may be too low Adjust brightness and contrast.
U65C`tfuvq/cbdlvq/gn Qbhf 35 Xfeoftebz- Kvmz 23- 3111 5;1: QN Problem Screen is blank and power indicator is Flashing green every 0.5 second Screen is blank and power indicator is flashing amber every 0.5 or 1 second Possible Cause Suggested Action The monitor is not receiving a video signal Check that the signal cable is firmly connected to the computer. Check that no pins are bent in the signal cable connector.
Qbhf 36 Xfeoftebz- Kvmz 23- 3111 5;1: QN ENGLISH U65C`tfuvq/cbdlvq/gn If you are unable to correct the problem yourself, you may seek further help as follows: Call the IBM HELPCENTER. FRANÇAIS Further Help In the US call 1-800-772-2227 In other countries contact your dealer, retailer, or other IBM authorized Servicer. http://www.pc.ibm.com/us/ accessories Information about the Video Electronics Standards Association can be found on the worldwide web at: 2. Purchase receipt. 3.
U65C`tfuvq/cbdlvq/gn Qbhf 37 Xfeoftebz- Kvmz 23- 3111 5;1: QN 2. Carefully insert the head of a flathead (–) screwdriver into the slot visible along either side of the cable cover (a) and pry it off. 3. Squeeze the sides of the hinge cover (b) and pull it off. 4. Carefully lift the DVI connector cover (d) . 5. Carefully lift the stand cover (c) along the top and then slide it backwards and off the stand. 6.
5;1: QN ENGLISH Xfeoftebz- Kvmz 23- 3111 FRANÇAIS To obtain the correct cables and/or to get further instructions on installing them, call the IBM HELPCENTER at the above numbers or contact your dealer, retailer, or other IBM authorized Servicer. 1. Refer to “Removing page 26/27. ITALIANO ESPAÑOL DEUTSCH Setting up & connecting your DVI-D cable the stand & cables section” on step 1-6 of 2. Connect the DVI-D cable to DVI-D connector. 3. Route the cable as shown in the diagram.
U65C`tfuvq/cbdlvq/gn Qbhf 39 Xfeoftebz- Kvmz 23- 3111 5;1: QN Specifications This color monitor (Type-model 9511-Axx) uses a 15-inch TFT LCD Dimensions Width: Depth: Height: 401 mm 204 mm 380 mm Weight Unpackaged: packaged: 11.8 lb. (5.35 Kg) 16.1 lb (7.39 Kg) Tilt Forward Tilt: Backward tilt: – 4° + 40° Image Viewable Image Size: Maximum Height: Maximum Width: Pixel Pitch: 15.1” (383.5 mm) 230.4 mm 307.2 mm 0.30 mm (H) × 0.
Qbhf 3: Xfeoftebz- Kvmz 23- 3111 5;1: QN ENGLISH U65C`tfuvq/cbdlvq/gn FRANÇAIS :DUUDQW\ 6WDWHPHQWV Your Installation Diskette includes translation of IBM’s Statement of Warranty in following languages: Bulgarian Z1255697.bul.html Chinese Z1255697.chi.html Croatian Z1255697.cro.html Czech Z1255697.cze.html Danish Z1255697.dan.html Dutch Z1255697.dut.html English Z1255697.eng.html Finnish Z1255697.fin.html French Z1255697.fre.html German Z1255697.ger.html Greek Z1255697.gre.
U65C`tfuvq/cbdlvq/gn Qbhf 41 Xfeoftebz- Kvmz 23- 3111 5;1: QN Spanish Z1255697.spa.html Swedish Z1255697.swe.html Taiwanese Z1255697.tai.html Turkiye Statement of Warranty: Turkish Z1255698.tur.html English Z1255698.eng.html United States, Puerto Rico and Candada Statem ent of Lim ited Warranty: 30 English Z1254753.eng.html French Canadian Z1254753.fca.