Hardware Maintenance
Table Of Contents
- Contents
- About this manual
- Safety information
- Important service information
- General checkout
- Related service information
- Lenovo TAB 2 A10-30
- Specifications
- Components location
- Parts list
- FRU replacement notices
- Removing and replacing an FRU
- 1010 Rear cover and side key
- 1020 Battery pack
- 1030 Rear camera
- 1040 Microphone
- 1050 Vibrator motor
- 1060 LCD FPC
- 1070 Main FPC
- 1080 Antenna PCB (LTE version only)
- 1090 Sub board
- 1100 Left Speaker
- 1110 Right Speaker
- 1120 Main board assembly (with left and right speakers, audio jack FPC, and side key FPC)
- 1130 Front camera
- Notices
Lenovo TAB 2 A10-30
37
1020 Battery pack
For access, detach the following FRU:
• Rear cover assembly (see Step 1 on page 35 to Step 2 on page 35 in “1010 Rear
cover and side key”)
Rechargeable Battery Notice
1. Remove screws on the metal piece for fixing the battery FPC.
Figure 2-1. The screws on the metal piece for fixing the battery FPC
Part No. Screw (quantity) Color Torque
M1.4 × 2.0 (2) Silver N/A
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type.
When replacing the lithium battery, use only the same or an equivalent type
that is recommended by the manufacturer. The battery contains lithium and
can explode if not properly used, handled, or disposed of.
Dispose of the used battery according to the instructions. Do not:
• Throw or immerse into water
• Heat to more than 100°C (212°F)
• Repair or disassemble
a
a