Hardware Maintenance
Table Of Contents
- Contents
- About this manual
- Safety information
- Important service information
- General checkout
- Related service information
- Lenovo TAB 2 A10-30
- Specifications
- Components location
- Parts list
- FRU replacement notices
- Removing and replacing an FRU
- 1010 Rear cover and side key
- 1020 Battery pack
- 1030 Rear camera
- 1040 Microphone
- 1050 Vibrator motor
- 1060 LCD FPC
- 1070 Main FPC
- 1080 Antenna PCB (LTE version only)
- 1090 Sub board
- 1100 Left Speaker
- 1110 Right Speaker
- 1120 Main board assembly (with left and right speakers, audio jack FPC, and side key FPC)
- 1130 Front camera
- Notices
Lenovo TAB 2 A10-30 Hardware Maintenance Manual
46
1060 LCD FPC
For access, detach the following FRUs:
• Rear cover assembly (see Step 1 on page 35 to Step 2 on page 35 in “1010 Rear
cover and side key”)
• Battery FPC (see Step 1 on page 37 to Step 3 on page 38 in “1020 Battery
pack”)
1. Remove the mylar on the LCD FPC at the main board side as shown in the
figure below.
Figure 6-1. Removing the mylar on the LCD FPC (main board side)
2. Unlock the connector of the LCD FPC on the main board using a triangle
paddle.
Figure 6-2. Unlocking the connector of the LCD FPC (main board side)