Quick Reference Inside - Important safety information - Warranty and other notices - Computer setup - Software recovery - Troubleshooting and diagnostics - Help and Service - IBM Lotus software offer
Quick Reference
Note Before using this information and the product it supports, be sure to read the following: v “Important safety information” on page v v Appendix B, “Lenovo Statement of Limited Warranty,” on page 35 v Appendix D, “Notices,” on page 65 First Edition (June 2005) © Copyright Lenovo 2005. Portions © Copyright International Business Machines Corporation 2005. All rights reserved. U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with RESTRICTED RIGHTS.
Contents Important safety information . . . . . . . . . . . . . . . . v Conditions that require immediate action . . . . . . . . . . . . . v General safety guidelines . . . . . . . . . . . . . . . . . . vi Additional safety information . . . . . . . . . . . . . . . . xi Lithium battery notice . . . . . . . . . . . . . . . . . . . xi Modem safety information . . . . . . . . . . . . . . . . . xii Laser compliance statement . . . . . . . . . . . . . . . . . xii Power supply statement . . . . . . . . . . . . .
Power supply and system board PC-Doctor for DOS Diagnostics . Error codes . . . . . . . POST beep codes . . . . . Diagnostic LEDs . . . . . . . . . . . . . . . . . . Appendix A. IBM Lotus Software Offer Appendix B. Lenovo Statement of Part 1 - General Terms . . . . . Part 2 - Country-unique Terms . . Part 3 - Warranty Information . . Guarantee supplement for Mexico . . Limited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 25 27 29 .
Important safety information Note Please read important safety information first. This information can help you safely use your ThinkCentre® or ThinkPad® personal computer. Follow and retain all information included with your computer. The information in this document does not alter the terms of your purchase agreement or the Lenovo™ Statement of Limited Warranty. Customer safety is important. Our products are developed to be safe and effective. However, personal computers are electronic devices.
Frequently inspect your computer and its components for damage or wear or signs of danger. If you have any question about the condition of a component, do not use the product. Contact the Customer Support Center or the product manufacturer for instructions on how to inspect the product and have it repaired, if necessary. For a list of Service and Support phone numbers, see “Worldwide telephone list” on page 57.
instructions when it is appropriate for customers to replace those parts. You must closely follow all instructions when performing such replacements. Always make sure that the power is turned off and that the product is unplugged from any power source before you attempt the replacement. If you have any questions or concerns, contact the Customer Support Center.
Protect the cord and power adapters from liquids. For instance, do not leave your cord or power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers. Liquids can cause a short circuit, particularly if the cord or power adapter has been stressed by misuse. Liquids can also cause gradual corrosion of the power cord terminals and/or the connector terminals on the adapter which can eventually result in overheating.
Be sure that the power outlet you are using is properly wired, easily accessible, and located close to the equipment. Do not fully extend power cords in a way that will stress the cords. Carefully connect and disconnect the equipment from the electrical outlet. Batteries All personal computers manufactured by Lenovo contain a non-rechargeable coin cell battery to provide power to the system clock.
become blocked by placing the product on a bed, sofa, carpet, or other flexible surface. Never block, cover or disable these features. You should inspect your desktop computer for dust accumulation at least once every three months. Before inspecting your computer, turn off the power and unplug the computer’s power cord from the electrical outlet; then remove any dust from vents and perforations in the bezel.
Additional safety information Danger Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: v Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. v Connect all power cords to a properly wired and grounded electrical outlet. v Connect to properly wired outlets any equipment that will be attached to this product.
Do not: v Throw or immerse into water v Heat to more than 100°C (212°F) v Repair or disassemble Dispose of the battery as required by local ordinances or regulations. Modem safety information Caution To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. To reduce the risk of fire, electrical shock, or injury when using telephone equipment, always follow basic safety precautions, such as: v Never install telephone wiring during a lightning storm.
Caution Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. Removing the covers of the CD-ROM drive or DVD-ROM drive could result in exposure to hazardous laser radiation. There are no serviceable parts inside the CD-ROM drive or DVD-ROM drive. Do not remove the drive covers. Some CD-ROM drives and DVD-ROM drives contain an embedded Class 3A or Class 3B laser diode. Note the following statement.
xiv
Additional help This Quick Reference provides the information for installing your computer and starting the operating system. This publication also includes basic troubleshooting information, software recovery procedures, help and service information, and warranty information. The User Guide for your computer has information about installing optional hardware. This Portable Document Format (PDF) file is available through the Access IBM program on your computer desktop.
xvi
Chapter 1. Arranging your workspace To get the most from your computer, arrange both the equipment you use and your work area to suit your needs and the kind of work you do. Your comfort is of foremost importance, but light sources, air circulation, and the location of electrical outlets also can affect the way you arrange your workspace. Comfort Although no single working position is ideal for everyone, here are a few guidelines to help you find a position that suits you best.
angles to windows and other light sources, when possible. Reduce overhead lighting, if necessary, by turning off lights or using lower wattage bulbs. If you install the monitor near a window, use curtains or blinds to block the sunlight. You might have to adjust the Brightness and Contrast controls on the monitor as the room lighting changes throughout the day. Where it is impossible to avoid reflections or to adjust the lighting, an antiglare filter placed over the screen might be helpful.
Chapter 2. Setting up your computer Note: Your computer might not have all of the connectors that are described in this chapter. Use the following information when setting up your computer. Look for the small connector icons on the back of your computer. If your computer cables and connector panel have color-coded connectors, match the color of the cable end with the color of the connector. For example, match a blue cable end with a blue connector, a red cable end with a red connector. 1.
v If you have a Standard Video Graphics Array (SVGA) monitor, connect the cable to the connector as shown. Note: If your model has two monitor connectors, be sure to use the connector on the accelerated graphics port (AGP) adapter. v If you have a digital video interface (DVI) monitor, connect the cable to the connector as shown. Note: Your computer must have an adapter installed that supports the DVI monitor. 5. If you have a modem, connect the modem using the following instructions.
6. If you have audio devices, attach them using the following instructions. For more information about speakers, see steps 7 and 8. 1 Audio line-in 2 Audio line-out 3 Microphone 4 Headphone This connector receives audio signals from an external audio device, such as a stereo system. This connector sends audio signals from the computer to external devices, such as powered stereo speakers.
9. Connect any additional devices that you have. Your computer might not have all connectors that are shown. 1394 1394 1 USB 2 Serial 3 S-video 4 Parallel 5 Ethernet Use these connectors to attach a device that requires a Universal Serial Bus (USB) connection, such as a mouse, scanner, printer, or personal digital assistant (PDA). Use this connector to attach an external modem, serial printer, or other device that uses a 9-pin serial connector.
10. Connect the power cords to properly grounded electrical outlets. Note: For more information about connectors, see the Access IBM program on your computer desktop. Turning on power Turn on the monitor and other external devices first, and then turn on the computer. When the power-on self-test (POST) is finished, the logo window closes. If your computer has preinstalled software, the software installation program starts.
Completing important tasks After you have set up your computer, perform the following tasks, which will save you time and trouble later: v Create a diagnostics diskette. The diagnostics tool can isolate hardware problems and is part of the Product Recovery program. Making a diagnostics diskette ahead of time assures you will be able to use of the diagnostics tool if the Product Recovery program becomes inaccessible. See “Creating a Diagnostics diskette” on page 26.
For more details about updating your antivirus software, refer to the Access IBM program. Starting the Setup Utility The Setup Utility enables you to view, set, or change BIOS configuration settings and passwords. 1. Shut down the operating system and turn off your computer. 2. While turning on your computer, repeatedly press and release the F1 key to enter the Setup Utility. Note: If a password has been set, the Setup Utility program menu is not displayed until you type your password.
The machine type, model, and serial number are labeled on your computer. Use the following table to record this information. Product name ______________________________________________ Machine type and model ______________________________________________ Serial number (S/N) ______________________________________________ Date of purchase ______________________________________________ You can register your computer over the Internet at the following Web site: http://www.lenovo.
Chapter 3. Recovering software The Rescue and Recovery™ program provides an environment that runs independently of the Windows operating system and is hidden from the Windows operating system. Because the Rescue and Recovery workspace is hidden, it is immune from most virus attacks and provides a safe place to perform rescue and recovery operations that might not be possible in the Windows environment.
Note: Your Microsoft Windows license permits you to create only one set of Product Recovery discs, so it is important that you store the discs in a safe place after you make them. To create Product Recovery discs, do the following: 1. From the Windows desktop, click Start, click All Programs, click Access IBM, then click Create Product Recovery discs. 2. Follow the instructions on the screen.
v On a network drive v On recordable CDs or DVDs (a recordable CD or DVD drive is required for this option) After you have backed up your hard disk, you can restore the complete contents of the hard disk, restore selected files only, or restore only the Windows operating system and applications. To perform a backup operation, do the following: 1. From the Windows desktop, click Start, click All Programs, click Access IBM, then click IBM Rescue and Recovery. The Rescue and Recovery program opens. 2.
backup operation. You also can rescue individual files from a Rescue and Recovery backup located on your local hard disk, a USB device, or a network drive. v Restore your hard disk from Rescue and Recovery backup: Once you perform a backup operation using the Rescue and Recovery program, you can perform restore operations from the Rescue and Recovery workspace, even if you cannot start Windows.
v For information about other features of the Rescue and Recovery workspace, click Help. Post-recovery notes Notes: 1. After restoring a hard disk to the original factory contents you might have to reinstall device drivers for some devices. See “Recovering or installing device drivers” on page 17. 2. Some computers come with Microsoft Office or Microsoft Works preinstalled.
Creating and using rescue media Rescue media enables you to start the Rescue and Recovery program from CD or DVD. Rescue media is extremely important if you are unable to access the Rescue and Recovery program using the Enter or F11 key. To create rescue media, do the following: 1. From the Windows desktop, click Start, click All Programs, click Access IBM, then click Create Rescue Media. 2. Select the radio button for the type of rescue media you want to create. 3. Click OK. 4.
If the repair operation finishes without error, you will be able to access the Rescue and Recovery workspace by repeatedly pressing and releasing the Enter or F11 key while you restart your computer. If an error message appears during the repair operation and the repair operation cannot be completed, you might have a problem with the partition that contains the Rescue and Recovery workspace. Use your rescue media to access the Rescue and Recovery workspace.
when prompted for the device driver that you want to install, click Have Disk and Browse. Then select the appropriate device-driver (.inf) file from the device subfolder. v In the device subfolder, look for a setup.exe file. Double-click SETUP.EXE and follow the instructions on the screen. Setting a rescue device in the startup sequence Before you start recovery from a CD, DVD, USB hard disk drive, or any other external device, you must first change the startup sequence in the Setup Utility. 1.
Chapter 4. Getting information, help, and service If you need help, service, or technical assistance or just want more information about products manufactured by Lenovo, you will find a wide variety of sources available from Lenovo to assist you. This section contains information about where to go for additional information about Lenovo, products manufactured by Lenovo, what to do if you experience a problem with your computer, and whom to call for service should it be necessary.
information and download device drivers and updates. To access these pages, go to http://www.lenovo.com/think/support and follow the instructions. Calling for service If you have tried to correct the problem yourself and still need help, during the warranty period, you can get help and information by telephone through the Customer Support Center.
In all other countries or regions, contact your reseller or marketing representative. Other services If you travel with your computer or relocate it to a country where your ThinkCentre or ThinkPad machine type is sold, your computer might be eligible for International Warranty Service, which automatically entitles you to obtain warranty service throughout the warranty period. Service will be performed by service providers authorized to perform warranty service.
22
Chapter 5. Troubleshooting and diagnostics This chapter describes some basic troubleshooting and diagnostic tools. If your computer problem is not described here, use Access IBM for more detailed troubleshooting information or see “Additional help” on page xv. Basic troubleshooting Symptom Action The computer does not Verify that: start when you press the v The power cord is plugged into the rear of the computer power button. and into a working electrical outlet.
Symptom Action The keyboard does not work. The computer does not respond to the keyboard. Verify that: v The computer and monitor are turned on and the brightness and contrast controls are set correctly. v The keyboard is securely connected to the keyboard connector on the computer. v No keys are stuck. If you cannot correct the problem, have the computer serviced. The Enhanced Verify that: Performance USB v The computer is turned on.
Power supply and system board Diagnostic LEDs You computer has two LEDs located on power supply on the back of the chassis. The power button LED located on front of your computer and the two LEDs on the back will help you determine if the power supply or system board is working correctly. The following table uses the LEDs to diagnose possible power supply and system board problems.
Running Diagnostics from the Rescue and Recovery workspace Use the following steps to run diagnostics from the Rescue and Recovery workspace: 1. Shut down your operating system, and turn off the computer. 2. When you turn on your computer, repeatedly press and release the Enter or F11 key when indicated on the screen to start the Rescue and Recovery workspace. 3. From the main menu, select Diagnose Hardware. 4. Follow the prompts on the screen. 5. Restart the computer.
6. Shut down or restart your computer. Error codes The following table includes some of the more common error codes that might be displayed when your computer is performing the power-on self-test (POST). v Record error codes that are displayed. If you call for service, you will be asked for the error codes. v If there are multiple error codes, always work to solve problems in the order in which the error codes are displayed. Usually, solving the first error code will solve succeeding ones.
Code Description Action 250 The battery is defective. Replace the battery. See the battery replacement procedure in your online User Guide, which is available through the Access IBM program. 270 or 271 Real time clock error Set the date and time using the Setup Utility. If you cannot correct the problem, have the computer serviced. 662 A change in configuration occurred. A diskette drive has been added or removed. v Restore the original hardware.
Code Description Action 8603 Pointing device error v Install a mouse. Or No mouse was detected. v Set the mouse option correctly using the Setup Utility. If you cannot correct the problem, have the computer serviced. POST beep codes Another way for POST to notify you of errors is through a series of audible beeps. A beep pattern represents a numeric value and provides further information about the location of a potential problem.
– If the operating system starts when you turn on your computer, use the Access IBM program to learn how to run diagnostics and see the entire online troubleshooting procedures. – If the operating system will not start, have the computer serviced.
Appendix A. IBM Lotus Software Offer About the offer: As a qualifying ThinkCentre or ThinkPad personal computer customer, you are receiving a single, limited license for the Lotus Notes® ″standalone″ client and a single license for the Lotus® SmartSuite® software. These licenses entitle you to install and use this software on your new ThinkCentre or ThinkPad personal computer using one of the following options: v Media for this software is not included in this offer.
Lotus Notes programs described in this offer constitutes acceptance of the terms of this Offer and the IPLA. For further information regarding the IBM IPLA, visit http://www.ibm.com/software/sla/sladb.nsf. These programs are not for resale. Proof of Entitlement: The proof of purchase for your qualifying personal computer, as well as this Offer document, should be retained as your proof of entitlement.
v In Asia Pacific Countries: – Via the Internet: http://smartsuite.modusmedia.com – Mail address: IBM - Lotus Notes and SmartSuite Program Modus Media International eFulfillment Solution Center 750 Chai Chee Road #03-10/14, Technopark at Chai Chee, Singapore 469000 Fax: +65 6448 5830 To inquire about an order, contact: Smartsuiteapac@modusmedia.com Appendix A.
34
Appendix B. Lenovo Statement of Limited Warranty LSOLW-00 05/2005 Part 1 - General Terms This Statement of Limited Warranty includes Part 1 - General Terms, Part 2 Country-unique Terms, and Part 3 - Warranty Information. The terms of Part 2 replace or modify those of Part 1. The warranties provided by Lenovo Group Limited or one of its subsidiaries (called ″Lenovo″) in this Statement of Limited Warranty apply only to Machines you purchase for your use, and not for resale.
v any software programs, whether pre-loaded or shipped with the Machine, or installed subsequently; v failure resulting from misuse, accident, modification, unsuitable physical or operating environment, or improper maintenance by you; v failure caused by a product for which Lenovo is not responsible; and v any non-Lenovo products, including those that Lenovo may procure and provide with or integrate into a Lenovo Machine at your request.
If the Machine does not function as warranted during the warranty period and your problem cannot be resolved over the telephone or electronically, through your application of software updates, or with a CRU, your Service Provider, will either, at its discretion, 1) repair it to make it function as warranted, or 2) replace it with one that is at least functionally equivalent. If your Service Provider is unable to do either, you may return the Machine to your place of purchase and your money will be refunded.
Limitation of Liability Lenovo is responsible for loss of, or damage to, your Machine only while it is 1) in your Service Provider’s possession or 2) in transit in those cases where Lenovo is responsible for the transportation charges. Neither Lenovo nor your Service Provider are responsible for any of your confidential, proprietary or personal information contained in a Machine which you return for any reason. You should remove all such information from the Machine prior to its return.
THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR JURISDICTION TO JURISDICTION. Jurisdiction All of our rights, duties, and obligations are subject to the courts of the country in which you acquired the Machine.
PARAGUAY Jurisdiction: The following is added after the first sentence: Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the courts of the city of Asuncion. PERU Jurisdiction: The following is added after the first sentence: Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the Judges and Tribunals of the Judicial District of Lima, Cercado.
ASIA PACIFIC AUSTRALIA What this Warranty Covers: The following paragraph is added to this section: The warranties specified in this Section are in addition to any rights you may have under the Trade Practices Act 1974 or other similar legislation and are only limited to the extent permitted by the applicable legislation.
If one of the parties refuses or otherwise fails to appoint an arbitrator within 30 days of the date the other party appoints its, the first appointed arbitrator shall be the sole arbitrator, provided that the arbitrator was validly and properly appointed. All proceedings shall be conducted, including all documents presented in such proceedings, in the English language. The English language version of this Statement of Limited Warranty prevails over any other language version. HONG KONG S.A.R.
JAPAN Governing Law: The following sentence is added to this section: Any doubts concerning this Statement of Limited Warranty will be initially resolved between us in good faith and in accordance with the principle of mutual trust. MALAYSIA Limitation of Liability: The word ″SPECIAL″ in item 3 of the fifth paragraph is deleted.
Vacancies in the post of chairman shall be filled by the president of the Philippine Dispute Resolution Center, Inc.. Other vacancies shall be filled by the respective nominating party. Proceedings shall continue from the stage they were at when the vacancy occurred.
Republic, Slovenia, or Ukraine, you may obtain warranty service for that Machine in any of those countries from a Service Provider, provided the Machine has been announced and made available by Lenovo in the country in which you wish to obtain service.. If you purchase a Machine in a Middle Eastern or African country, you may obtain warranty service for that Machine from a Service Provider within the country of purchase, provided the Machine has been announced and made available by Lenovo in that country.
capital city, of the country of your registered office and/or commercial site location only are competent; 4) in France, Algeria, Benin, Burkina Faso, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Congo Republic, Djibouti, Democratic Republic of Congo, Equatorial Guinea, French Guiana, French Polynesia, Gabon, Gambia, Guinea, Guinea-Bissau, Ivory Coast, Lebanon, Madagascar, Mali, Mauritania, Mauritius, Mayotte, Morocco, New Caledonia, Niger, Reunion, Senegal, Seychelles, Togo, Tunisia, Vanu
jointly appoint the chairman. If arbitrators cannot agree on the chairman, then the Central Chamber of Commerce in Helsinki will appoint the chairman. EUROPEAN UNION (EU) THE FOLLOWING TERMS APPLY TO ALL EU COUNTRIES: The warranty for Machines acquired in EU countries is valid and applicable in all EU countries provided the Machines have been announced and made available in such countries.
3) LOST PROFITS, EVEN IF THEY ARISE AS AN IMMEDIATE CONSEQUENCE OF THE EVENT THAT GENERATED THE DAMAGES; OR 4) LOSS OF BUSINESS, REVENUE, GOODWILL, OR ANTICIPATED SAVINGS. FRANCE AND BELGIUM Limitation of Liability: The following replaces the terms of this section in its entirety: Except as otherwise provided by mandatory law: 1.
The second paragraph does not apply. What Lenovo Will Do to Correct Problems: The following is added to this section: During the warranty period, Lenovo will reimburse you for the transportation charges for the delivery of the failing Machine to IBM Service. Limitation of Liability: The following paragraph is added to this section: The limitations and exclusions specified in the Statement of Limited Warranty will not apply to damages caused by Lenovo with fraud or gross negligence and for express warranty.
What Lenovo Will Do to Correct Problems: The following is added to this section: During the warranty period, transportation for delivery of the failing Machine to Lenovo or IBM service will be at Lenovo’s expense. Limitation of Liability: The following paragraph is added to this section: The limitations and exclusions specified in the Statement of Limited Warranty will not apply to damages caused by Lenovo with fraud or gross negligence and for express warranty.
1. Lenovo will accept unlimited liability for death or personal injury caused by the negligence of Lenovo. 2. Subject always to the Items for Which Lenovo is Not Liable below, Lenovo will accept unlimited liability for physical damage to your tangible property resulting from the negligence of Lenovo. 3.
b. any breach of its obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982, or any statutory modification or re-enactment of either such Section. 2. Lenovo will accept unlimited liability, subject always to the Items for Which Lenovo is Not Liable below, for physical damage to your tangible property resulting from the negligence of Lenovo. 3.
Machine Type 8122 8123 Country or Region of Purchase Types of Warranty Service Warranty Period United States, Canada, Europe, Parts and Labor - 1 Middle East, Africa, Australia, New year Zealand, PRC (China), Korea, Bangladesh, India, Indonesia, Malaysia, Philippines, Sinagapore, Sri Lanka, Vietnam, Brunei, Thailand, and Taiwan 5 Latin America, Argentina, China (Hong Kong S.A.
Machine Type 8131 8132 Country or Region of Purchase Types of Warranty Service Warranty Period United States, Canada, Latin America, Argentina, Europe, Middle East, Africa,Australia, New Zealand, PRC (China), Korea, Bangladesh, India, Indonesia, Malaysia, Philippines, Sinagapore, Sri Lanka, Vietnam, Brunei, Thailand, and Taiwan Parts and Labor - 1 year 5 China (Hong Kong S.A.
Machine Type 8135 Country or Region of Purchase Types of Warranty Service Warranty Period United States, Canada, Latin America, PRC (China), Korea, China (Hong Kong S.A.
Machine Type 9212 9213 Country or Region of Purchase Types of Warranty Service Warranty Period Australia, New Zealand, PRC (China) Parts and Labor - 3 years 5 Korea Parts and Labor - 1 year 5 China (Hong Kong S.A.
You will disconnect the failing Machine for collection arranged by your Service Provider. A shipping container will be provided to you for you to return your Machine to a designated service center. A courier will pick up your Machine and deliver it to the designated service center. Following its repair or exchange, the service center will arrange the return delivery of the Machine to your location. You are responsible for its installation and verification. 4.
Country or Region Telephone Number Argentina 0800-666-0011 (Spanish) Australia 131-426 (English) Austria Up and running support: 01-24592-5901 Warranty service and support: 01-211-454-610 (German) Belgium Up and running support: 02-210-9820 (Dutch) Up and running support: 02-210-9800 (French) Warranty service and support: 02-225-3611 (Dutch, French) Bolivia 0800-0189 (Spanish) Brazil Sao Paulo region: (11) 3889-8986 Toll free outside Sao Paulo region: 0800-7014-815 (Brazilian Portuguese) Canad
Country or Region Telephone Number France Up and running support: 0238-557-450 Warranty service and support (hardware): 0810-631-213 Warranty service and support (software): 0810-631-020 (French) Germany Up and running support: 07032-15-49201 Warranty service and support: 01805-25-35-58 (German) Greece +30-210-680-1700 Guatemala 335-8490 (Spanish) Honduras Tegucigalpa & San Pedro Sula: 232-4222 San Pedro Sula: 552-2234 (Spanish) Hungary +36-1-382-5720 India 1600-44-6666 Alternate Toll Free: +
Country or Region Telephone Number Latvia +386-61-1796-699 Lithuania +386-61-1796-699 Luxembourg +352-298-977-5063 (French) Malaysia 1800-88-8558 (English, Bahasa, Melayu) Malta +356-23-4175 Mexico 001-866-434-2080 (Spanish) Middle East +44 (0)1475-555-055 Netherlands +31-20-514-5770 (Dutch) New Zealand 0800-446-149 (English) Nicaragua 255-6658 (Spanish) Norway Up and running support: 6681-1100 Warranty service and support: 8152-1550 (Norwegian) Panama 206-6047 (Spanish) Peru 0-80
Country or Region Telephone Number Turkey 00800-4463-2041 (Turkish) United Kingdom Up and running support: 01475-555-055 Warranty service and support (hardware): 08705-500-900 Warranty service and support (software): 08457-151-516 (English) United States 1-800-IBM-SERV (1-800-426-7378) (English) Uruguay 000-411-005-6649 (Spanish) Venezuela 0-800-100-2011 (Spanish) Vietnam For northern area and Hanoi: 84-4-8436675 For southern area and Ho Chi Minh City: 84-8-829-5160 (English, Vietnamese) Guara
Manufactured by: SCI Systems de México, S.A. de C.V. Av. De la Solidaridad Iberoamericana No. 7020 Col. Club de Golf Atlas El Salto, Jalisco, México C.P. 45680, Tel. 01-800-3676900 Marketing by: Lenovo de México, Comercialización y Servicios, S. A. de C. V. Alfonso Nápoles Gándara No 3111 Parque Corporativo de Peña Blanca Delegación Álvaro Obregón México, D.F., México C.P. 01210, Tel.
Appendix C. Customer Replacement Units (CRUs) You can find instructions for replacing CRUs by Machine Type in one of the reference materials listed in the charts below. Note: Use only the parts provided by Lenovo.
8122, 8123, 8124, 8131, 8137, 8138 Quick Reference User Guide CRU Guide Heatsink X Processor X System Board X Power Supply X HDD X If you are unable to access these instructions or if you have difficulty replacing a CRU, you can use either of the following additional resources: v The Hardware Replacement Guide is available in the Online Books folder on your computer. Click All Programs->Online Books to find the Hardware Replacement Guide.
Appendix D. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites.
Approach Domino Freelance Graphics Lotus Lotus FastSite Lotus Notes Lotus Organizer Notes Passport Advantage SmartSuite Word Pro 1-2-3 Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, product, or service names may be trademarks or service marks of others. Electronic emissions notices The following information refers to machine types 8122, 8123, 8124 8129, 8131, 8132, 8133, 8134, 8135, 8136, 8137, 8138, 9212, and 9213.
changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible party: Lenovo (United States) Inc.
Note: If the device is an internal modem, a second FCC registration label is also provided. You may attach the label to the exterior of the computer in which you install the Lenovo modem, or you may attach the label to the external DAA, if you have one. Place the label in a location that is easily accessible, should you need to provide the label information to the telephone company. 2.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier.
For units intended to be operated at 230 volts (outside the U.S.): Use a cord set with a grounding-type attachment plug. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed. Power cords provided by Lenovo for a specific country or region are usually available only in that country or region. For units intended to be operated in Denmark: Use a cord set with a grounding-type attachment plug.
Power cord part number Used in these countries and regions 14F0087 Israel 14F0069 Chile, Italy, Libyan Arab Jamahiriya 14F0015 Bangladesh, Lesotho, Macao S.A.R. of China, Maldives, Namibia, Nepal, Pakistan, Samoa, South Africa, Sri Lanka, Swaziland, Uganda 14F0033 Abu Dhabi, Bahrain, Botswana, Brunei Darussalam, Channel Islands, Cyprus, Dominica, Gambia, Ghana, Grenada, Guyana, Hong Kong S.A.R.
unsorted municipal waste, but use the collection framework available to them for the return, recycle, recovery of WEEE and minimize any potential effects of EEE on the environment and human health due to the presence of hazardous substances. For additional WEEE information go to: http://www.lenovo.com/lenovo/environment. Appendix D.
74
Part Number: 41D1345 Printed in USA (1P) P/N: 41D1345
