E470, E470c, and E475 User Guide
Note: Before using this information and the product it supports, be sure to read and understand the following: • Safety, Warranty, and Setup Guide • “Important safety information” on page v The latest Safety, Warranty, and Setup Guide and the Regulatory Notice are available on the Lenovo Support Web site at: http://www.lenovo.com/support Second Edition (November 2016) © Copyright Lenovo 2016.
Contents Important safety information . . . . . . v Read this first . . . . . . . . . . . . . . . Important information about using your computer . Conditions that require immediate action . . . . Service and upgrades . . . . . . . . . . . . Power cords and power adapters . . . . . . . Extension cords and related devices . . . . . . Plugs and outlets. . . . . . . . . . . . . . Power supply statement . . . . . . . . . . . External devices . . . . . . . . . . . . . . General battery notice . . . . . . . . . .
BIOS menu . . . . . . . . . . . . . . Using system management. . . . . . . . . . 46 55 Chapter 6. Troubleshooting computer problems . . . . . . . . . . . . . . . 57 General tips for preventing problems . . . . Diagnosing problems with Lenovo Companion Troubleshooting . . . . . . . . . . . . Computer stops responding . . . . . Spills on the keyboard . . . . . . . . Error messages . . . . . . . . . . Beep errors . . . . . . . . . . . . Memory module problems . . . . . . Ethernet problems . . . . . . . . .
Appendix D. ENERGY STAR model information . . . . . . . . . . . . . 105 Appendix E. Notices . . . . . . . . . 107 © Copyright Lenovo 2016 Appendix F. Trademarks. . . . . . .
iv E470, E470c, and E475 User Guide
Important safety information Note: Read the important safety information first. Read this first This information can help you safely use your notebook computer. Follow and retain all information included with your computer. The information in this document does not alter the terms of your purchase agreement or the Limited Warranty. For more information, see "Warranty Information" in the Safety, Warranty, and Setup Guide that comes with your computer. Customer safety is important.
Prevent your computer from getting wet. To avoid spills and the danger of electrical shock, keep liquids away from your computer. Protect the cables from being damaged. Applying strong force to cables may damage or break them.
Conditions that require immediate action Products can become damaged due to misuse or neglect. Some product damage is serious enough that the product should not be used again until it has been inspected and, if necessary, repaired by an authorized servicer. As with any electronic device, pay close attention to the product when it is turned on. On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you might hear sounds like popping, cracking, or hissing.
sure that the power is turned off and that the product is unplugged from any power source. If you have any questions or concerns, contact the Customer Support Center. Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety. CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool.
To prevent possible overheating, do not cover the power adapter with clothing or other objects when the power adapter is plugged into an electrical outlet. Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should not exceed the power strip input rating.
Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. External devices CAUTION: Do not connect or disconnect any external device cables other than Universal Serial Bus (USB) and 1394 cables while the computer power is on; otherwise, you might damage your computer.
Notice for built-in rechargeable battery DANGER Do not attempt to replace the built-in rechargeable battery. Replacement of the battery must be done by a Lenovo-authorized repair facility or technician. Only recharge the battery strictly according to instructions included in the product documentation. The Lenovo-authorized repair facilities or technicians recycle Lenovo batteries according to local laws and regulations.
• Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and reliable operation. These features might inadvertently become blocked by placing the product on a bed, sofa, carpet, or other flexible surface. Never block, cover, or disable these features. • When the ac power adapter is connected to an electrical outlet and your computer, it generates heat. Do not place the adapter in contact with any part of your body while using it.
4. Attach power cords to outlets. 4. Remove all cables from devices. 5. Turn devices ON. The power cord must be disconnected from the wall outlet or receptacle before installing all other electrical cables connected to the computer. The power cord may be reconnected to the wall outlet or receptacle only after all other electrical cables have been connected to the computer.
Plastic bag notice DANGER Plastic bags can be dangerous. Keep plastic bags away from babies and children to avoid danger of suffocation. Glass parts notice CAUTION: Some parts of your product may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove it. Stop using your product until the glass is replaced by trained service personnel.
Chapter 1. Product overview This chapter provides basic information to help you get familiar with your computer. Computer controls, connectors, and indicators This section introduces hardware features of the computer. Front view 1 Microphones 2 Camera 3 Power button 4 Fingerprint reader (available on some models) 5 6 TrackPoint® buttons ThinkPad® trackpad 7 TrackPoint pointing stick 1 Microphones The microphones capture sound and voice when used with a program capable of handling audio.
You also can define what the power button does. For example, by pressing the power button, you can turn off the computer or put the computer into sleep or hibernation mode. To change what the power button does, do the following: 1. Go to Control Panel, and then change the view of Control Panel from Category to Large icons or Small icons. 2. Click Power Options ➙ Choose what the power buttons do. 3. Follow the instructions on the screen.
4 Always On USB 3.0 connector By default, the Always On USB 3.0 connector enables you to charge the USB-compatible devices in the following situations: • When your computer is on or in sleep mode • When your computer is off or in hibernation mode, but connected to ac power Attention: When you attach a USB cable to this connector, ensure that the USB mark is facing upward. Otherwise the connector might get damaged.
5 Security-lock slot To protect your computer from theft, lock your computer to a desk, table, or other fixture through a security cable lock that fits this security-lock slot. Note: You are responsible for evaluating, selecting, and implementing the locking device and security feature. Lenovo makes no comments, judgments, or warranties about the function, quality, or performance of the locking device and security feature.
2 Wireless-LAN-card slot Your computer might have a wireless LAN card installed for you to establish wireless LAN connections. 3 Built-in battery Use your computer with the battery power whenever ac power is unavailable. 4 Memory slots You can increase the amount of memory in your computer by installing a memory module in the memory slot. Memory modules are available as options from Lenovo. To purchase memory modules, go to http://www.lenovo.com/essentials.
1 Caps Lock indicator When this indicator is on, you can type uppercase letters by directly pressing the letter keys. 2 Camera status indicator When this indicator is on, the camera is in use. 3 5 System status indicators The indicator in the ThinkPad logo on the computer lid and the indicator in the power button show the system status of your computer. • Blinks for three times: The computer is initially connected to power. • On: The computer is on (in normal mode).
The following illustration shows where to find the label that contains the machine type and model information of your computer. FCC ID and IC Certification number The FCC and IC Certification information is identified by a label on the computer as shown in the following illustration. Note: Depending on the model, your computer might look different from the following illustration.
Labels for the Windows operating systems Windows® 10 Genuine Microsoft® label: Your computer might have a Genuine Microsoft label affixed to its cover depending on the following factors: • Your geographic location • Date when your computer was manufactured • Version of Windows 10 that is preinstalled See https://www.microsoft.com/en-us/howtotell/Hardware.aspx for illustrations of the various types of Genuine Microsoft labels.
• Display resolution: 1366 x 768 pixels or 1920 x 1080 pixels Keyboard • Six-row keyboard • Function keys • ThinkPad pointing device (including the TrackPoint pointing device and trackpad) Connectors and slots • ac power connector • Audio connector • Ethernet connector • HDMI connector • Media-card slot • One USB 2.0 connector • One USB 3.0 connector • One Always On USB 3.
Power source (ac power adapter) • Sine-wave input at 50 Hz to 60 Hz • Input rating of the ac power adapter: 100 V to 240 V ac, 50 Hz to 60 Hz Operating environment Maximum altitude (without pressurization) • 3048 m (10 000 ft) Temperature • At altitudes up to 2438 m (8000 ft) – Operating: 5°C to 35°C (41°F to 95°F) – Storage: 5°C to 43°C (41°F to 109°F) • At altitudes above 2438 m (8000 ft) – Maximum temperature when operating under the unpressurized condition: 31.
The available programs are subject to change without notice. To learn more about the programs and other computing solutions offered by Lenovo, go to: http://www.lenovo.com/support Active Protection System™ This program protects your internal storage drive when the shock sensor inside your computer detects a condition that could damage the drive. Such a condition includes system tilt, excessive vibration, or shock. The internal storage drive is less vulnerable to damage when it is not operating.
12 E470, E470c, and E475 User Guide
Chapter 2. Using your computer This chapter provides information to help you use the various features provided by your computer. Registering your computer When you register your computer, information is entered into a database, which enables Lenovo to contact you if there is a recall or other severe problem. In addition, some locations offer extended privileges and services to registered users.
• Before you dispose of the data on the internal storage drive, ensure that you read “Deleting data from your storage drive” on page 41. How do I attach an external display? • Refer to “Using an external display” on page 27. • With the Extend desktop function, you can display output on both the computer display and an external display. How do I attach or replace a device? Refer to the appropriate topic in Chapter 8 “Replacing devices” on page 75.
1 Windows logo key Press the Windows logo key to open the Start menu. For information about using the Windows logo key with other keys, see the help information system of the Windows operating system. 2 3 Fn key and function keys You can configure the Fn key and function keys in the Keyboard Properties window by doing the following: 1. Go to Control Panel, and then change the view of Control Panel from Category to Large icons or Small icons. 2. Click Keyboard.
• Enable or disable the built-in Bluetooth features. • Open a keyboard setting page. • The key invokes the function defined by yourself. If no function is defined, press this key to open the Cortana personal assistant. To define or change the action for the F12 key, do the following: 1. Open the Lenovo Settings program. See “Accessing Lenovo programs” on page 10. 2. Click the input icon . 3.
The ThinkPad pointing device consists of the following devices: 1 TrackPoint pointing device 2 Trackpad By default, both the TrackPoint pointing device and the trackpad are active with the touch gestures enabled. To change the settings, see “Customizing the ThinkPad pointing device” on page 20. Using the TrackPoint pointing device The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as pointing, clicking, and scrolling. Chapter 2.
The TrackPoint pointing device consists of the following components: 1 Pointing stick 2 Left-click button (primary-click button) 3 Right-click button (secondary-click button) 4 Scroll bar To use the TrackPoint pointing device, see the following instructions: Note: Place your hands in the typing position and use your index finger or middle finger to apply pressure to the pointing-stick nonslip cap. Use either thumb to press the left-click button or right-click button.
The trackpad can be divided into two zones: 1 Left-click zone (primary-click zone) 2 Right-click zone (secondary-click zone) To use the trackpad, see the following instructions: • Point Slide one finger across the surface of the trackpad to move the pointer accordingly. • Left-click Press the left-click zone 1 to select or open an item. You also can tap anywhere on the surface of the trackpad with one finger to perform the left-click action.
The following section introduces some frequently used touch gestures such as tapping, dragging, and scrolling. For more gestures, see the help information system of the ThinkPad pointing device. Notes: • When using two or more fingers, ensure that you position your fingers slightly apart. • Some gestures are not available if the last action was done from the TrackPoint pointing device. • Some gestures are only available when you are using certain apps.
• Ensure that you use a cap with grooves a as shown in the following illustration. • Depending on the model, your keyboard might look different from the illustration in this topic. Power management This section provides information about how to use ac power and battery power to achieve the best balance between performance and power management. Using the ac power adapter The power to run your computer can come either from the battery or from ac power.
Spend more time unplugged with ThinkPad batteries. Mobility has revolutionized business by enabling you to take your work wherever you go. With ThinkPad batteries, you are able to work longer without being tied to an electrical outlet. Checking the battery status Move your pointer to the battery-status icon in the Windows notification area to check the battery status.
1. Go to Control Panel, and then change the view of Control Panel from Category to Large icons or Small icons. 2. Click Power Options. 3. Follow the instructions on the screen. For more information, see the Windows help information system. Power-saving modes There are several modes that you can use at any time to conserve power. This section introduces each mode and gives tips on the effective use of battery power.
DANGER Your computer has an Ethernet connector. To avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector. Wireless connections Wireless connection is the transfer of data without the use of cables but by means of radio waves only. Using the wireless-LAN connection A wireless local area network (LAN) covers a relatively small geographic area, such as an office building or a house. Devices based on the 802.11 standards can connect to this type of network.
Note: It is not recommended to use the wireless feature (the 802.11 standards) of your computer simultaneously with a Bluetooth option. The data transmission speed can be delayed and the performance of the wireless feature can be degraded. 1. Do one of the following: • Press the Bluetooth-control key and turn on the Bluetooth feature. • Open the Start menu, and then click Settings ➙ Network & Internet ➙ Airplane mode. The Bluetooth feature is enabled. 2. Right-click the data that you want to send. 3.
The following list provides information about supported functions of the audio devices attached to the connectors on your computer or the docking station. • Headset with a 3.5-mm (0.14-inch), 4-pole plug: Headphone and microphone functions • Conventional headphone: Headphone function Note: The conventional microphone is not supported. Using the camera If your computer has a camera, you can use the camera to preview your video image and take a snapshot of your current image.
3. Press the card firmly into the card slot. If the plug-and-play feature is not enabled, do the following: 1. Go to Control Panel. 2. View Control Panel by Category. Click Hardware and Sound. 3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts. 5. Follow the instructions on the screen.
1. Connect the external display to an appropriate video connector on your computer, such as the HDMI connector. 2. Connect the external display to an electrical outlet. 3. Turn on the external display. If your computer cannot detect the external display, right-click on the desktop, and then click Screen resolution/Display settings ➙ Detect. • Connecting a wireless display Note: To use a wireless display, ensure that both your computer and the external display support the Miracast feature.
Finding ThinkPad options If you want to expand the capabilities of your computer, Lenovo has a number of hardware accessories and upgrades to meet your needs. Options include memory modules, storage devices, network cards, port replicators or docking stations, batteries, power adapters, keyboards, mice, and more. To shop at Lenovo, go to: http://www.lenovo.com/essentials Traveling with your computer This topic provides information to help you work with your computer when you are traveling.
30 E470, E470c, and E475 User Guide
Chapter 3. Accessibility, ergonomic, and maintenance information This chapter provides information about accessibility, ergonomic, and cleaning and maintenance. Accessibility information Lenovo is committed to providing users who have hearing, vision, and mobility limitations with greater access to information and technology. This section provides information about the ways these users can get the most out of their computer experience.
• On-Screen Keyboard If you prefer to type or enter data into your computer using a mouse, joystick, or other pointing device instead of a physical keyboard, you can use On-Screen Keyboard. On-Screen Keyboard displays a visual keyboard with all the standard keys. You can select keys using the mouse or another pointing device, or you can tap to select the keys if your computer supports multi-touch screen.
Customizable item size You can make the items on your screen easier to read by changing the item size. • To change the item size temporarily, use the Magnifier tool in Ease of Access Center. • To change the item size permanently, do the following: – Change the size of all the items on your screen. 1. Go to Control Panel, and ensure that you view Control Panel by Category. 2. Click Appearance and Personalization ➙ Display. 3. Change the item size by following the instructions on the screen. 4. Click Apply.
General posture: Make minor modifications in your working posture to deter the onset of discomfort caused by long periods of working in the same position. Frequent short breaks from your work also help to prevent minor discomfort associated with your working posture. Display: Position the display to maintain a comfortable viewing distance of 510 mm to 760 mm (20 inches to 30 inches). Avoid glare or reflections on the display from overhead lighting or outside sources of light.
• Do not turn your computer over when the ac power adapter is plugged in, otherwise, it could break the adapter plug. • Before moving your computer, be sure to remove any media, turn off attached devices, and disconnect cords and cables. • When picking up your open computer, hold it by the bottom. Do not pick up or hold your computer by the display. • Only an authorized ThinkPad repair technician should disassemble and repair your computer.
36 E470, E470c, and E475 User Guide
Chapter 4. Security This chapter provides information about how to protect your computer from unauthorized use. Using passwords You can help prevent your computer from unauthorized use by using passwords. After you set a password, a prompt is displayed on the screen each time you turn on the computer. Enter your password at the prompt. You cannot use the computer unless you type the correct password.
The master hard disk password also requires a user hard disk password. The master hard disk password is set and used by a system administrator. It enables the administrator to access any storage drive in a system like a master key. The administrator sets the master password; then assign a user password for each computer in the network. The user can then change the user password as desired, but the administrator still can get access by using the master password.
• Set a power-on password as well as a hard disk password. For security, a longer password is recommended. • The hard disk drive built into your computer can be protected by UEFI BIOS. To provide reliable security, use the security chip and a security program with the Trusted Platform Module (TPM) management feature. See “Setting the security chip” on page 39.
4. Move to an item you want to set by using the directional keys. When the item is highlighted, press Enter. 5. Set other items that you want to set. 6. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changes and exit. Notes: • Ensure that the supervisor password has been set in ThinkPad Setup. Otherwise anyone can change the settings for the security chip.
If you notice any of the following conditions, gently clean the surface of the reader with a dry, soft, lint-free cloth: • The surface of the reader is dirty or stained. • The surface of the reader is wet. • The reader often fails to enroll or authenticate your fingerprint. If your finger has any of the following conditions, you might not be able to register or authenticate it: • Your finger is wrinkled. • Your finger is rough, dry, or injured. • Your finger is stained with dirt, mud, or oil.
however, it cannot be decrypted without the old key. This feature is also available with the Drive Erase Utility for Resetting the Cryptographic Key and Erasing the Solid State Drive tool. Using firewalls If your system is preinstalled with a firewall program, it protects against computer Internet security threats, unauthorized access, intrusions, and Internet attacks. It also protects your privacy. For more information about how to use the firewall program, see the help system that comes with the program.
Chapter 5. Advanced configuration This chapter provides information to help you further configure the computer: Installing the Windows 10 operating system In some situations, you might need to install a new operating system. This topic provides instructions on how to install a Windows 10 operating system. Before you start, print these instructions.
Installing device drivers Device drivers are programs that contain instructions for the operating system about how to operate or “drive” a certain piece of hardware. Each hardware component on your computer has its own specific driver. If you add a component, the operating system must be instructed on how to operate that piece of hardware. After you install the driver, the operating system can recognize the hardware component and understand how to use it.
Configuring ThinkPad Setup The ThinkPad Setup program menu lists various items about system configuration. Attention: The default configurations are already optimized for you. Improper change of the configurations might cause unexpected results. To configure ThinkPad Setup, do the following: 1. Restart the computer. When the logo screen is displayed, press F1. The ThinkPad Setup program starts. Note: If you are required to enter the supervisor password, enter the correct password.
Updating the UEFI BIOS The UEFI BIOS is the first program that the computer runs when the computer is turned on. The UEFI BIOS initializes the hardware components, and loads the operating system and other programs. When you install a new program, device driver, or hardware component, you might be informed to update the UEFI BIOS. You can update the UEFI BIOS by starting your computer from a flash update disc or a flash update program running in the Windows environment.
• Preinstalled operating system license • UEFI Secure Boot • OA3 ID • OA2 Config menu Note: The BIOS menu items might change without notice. Depending on the model, the default value might vary. Network • Wake On LAN Values: Disabled, AC only, AC and Battery Description: The network administrator can turn on a computer from a management console by using the Wake on LAN feature. If you select AC Only, the Wake on LAN feature is enabled only when the ac power adapter is attached.
• Charge in battery mode Values: Disabled, Enabled Description: Select Enabled to charge devices through the Always On USB connectors even when the computer is turned off, in sleep mode, or in hibernation mode. Keyboard/Mouse • Fn and Ctrl Key swap Values: Disabled, Enabled Description: If you select Enabled, the Fn key works as the Ctrl key and the Ctrl key works as the Fn key.
Power • Intel SpeedStep® technology Values: Disabled, Enabled Description: Select the mode of Intel SpeedStep technology at runtime. – Mode for AC Values: Maximum Performance, Battery Optimized Description: Maximum Performance: Always highest speed – Mode for Battery Values: Maximum Performance, Battery Optimized Description: Battery Optimized: Always lowest speed Note: This submenu is available on models with an Intel CPU.
Date/Time menu Note: The BIOS menu items might change without notice. Depending on the model, the default value might vary. • System Date Descriptions: Set or change the date of the system. • System Time Descriptions: Set or change the time of the system. Security menu Note: The BIOS menu items might change without notice. Depending on the model, the default value might vary.
Descriptions: Set a power-on password to protect the computer from unauthorized access. For more information, see “Passwords introduction” on page 37. • Hard Disk x Password Values: Disabled, Enabled Descriptions: Set a hard disk password to prevent unauthorized users from accessing data on the internal storage drive. For more information, see “Passwords introduction” on page 37. Security Chip • Security Chip Type Value (for discrete TPM chip): TPM 2.
Descriptions: If this option is enabled, a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel Virtualization Technology. Note: This submenu is available on models with an Intel CPU. • Intel VT-d Feature Values: Disabled, Enabled Descriptions: Intel VT-d stands for Intel Virtualization Technology for Directed I/O. When enabled, a VMM can utilize the platform infrastructure for I/O virtualization. Note: This submenu is available on models with an Intel CPU.
Disabled is the default value when OS Optimized is set to Disabled. Enabled is the default value when OS Optimized is set to Enabled. Note: To enable Secure Boot, you need to set the startup setting as UEFI Only and set CSM Support as No. • Platform Mode Values: Setup Mode, User Mode Descriptions: Specify the system operating mode. • Secure Boot Mode Values: Standard Mode, Custom Mode Descriptions: Specify the Secure Boot mode.
– UEFI/Legacy Boot Priority Values: Legacy First, UEFI First Descriptions: Select the boot priority between UEFI and Legacy. – CSM Support (for UEFI Only) Values: Yes, No Compatibility Support Module (CSM) is required for starting the legacy operating system. If you select UEFI Only, CSM Support is selectable. For Both or Legacy Only mode, CSM Support is not selectable. Note: If you select UEFI Only, the computer cannot start from the bootable devices that do not have the UEFI-enabled operating system.
Using system management This topic is primarily intended for the network administrators. Your computer is designed for manageability, so that you can redirect more resources to better meet your business objectives. This manageability, known as total cost of ownership (TCO), enables you to remotely operate client computers in the same way as you operate your own computer, such as turning on a client computer, formatting a storage drive, and installing a program.
Enabling or disabling the Wake on LAN feature When the Wake on LAN feature is enabled and the computer is connected to a LAN, the network administrator can start the computer remotely from a management console, using a remote network-management program. To enable or disable the Wake on LAN feature, do the following: 1. Restart the computer. When the logo screen is displayed, press F1 to start the ThinkPad Setup program. 2. Select Config ➙ Network. The Network submenu is displayed. 3.
Chapter 6. Troubleshooting computer problems This chapter provides information about what to do if you experience a problem with your computer. General tips for preventing problems This topic provides the following tips to help you prevent computing problems: • Empty your recycle bin on a regular basis. • Use disk defragment tool regularly on your storage drive to improve data seek and read times. • To free up disk space, uninstall unused programs.
Troubleshooting If your computer has an error, it typically displays a message or an error code, or makes a beep when you turn it on. When you experience a problem, see the corresponding symptom and solution in this topic to try to solve the problem by yourself. Computer stops responding Print these instructions now and keep them with your computer for reference later. Problem: My computer is unresponsive (I cannot use the ThinkPad pointing device or the keyboard). Solution: Do the following: 1.
Attention: Although you might lose some data or work by turning off the computer immediately, leaving the computer on might make your computer unusable. 4. Wait until you are certain that all the liquid is dry before turning on your computer. Error messages • Message: 0177: Bad SVP data, stop POST task. Solution: Checksum of the supervisor password in the EEPROM is not correct. The system board should be replaced. Have the computer serviced. • Message: 0183: Bad CRC of Security Settings in EFI Variable.
Solution: The hard disk drive or hybrid drive is not working. Have the hard disk drive or hybrid drive serviced. • Message: 2102: Detection error on HDD2 (Mini SATA). Solution: The Mini SATA device is not working. Have the Mini SATA device serviced. • Message: 2110: Read error on HDD0 (Main HDD). Solution: The hard disk drive or hybrid drive is not working. Have the hard disk drive or hybrid drive serviced.
Problem: TCG-compliant functionality-related problem (might be the TPM initialization failure). TCG is the abbreviation for Trusted Computing Group. • Beeps: Five short beeps Problem: System board problem. • Beeps: Five short beeps, pause, five much shorter beeps, and pause Problem: TCG-compliant functionality-related problem (might be the BIOS code validation failure). Memory module problems Print these instructions now and keep them with your computer for reference later.
– You have installed all networking software that is necessary for your network environment. Check with your LAN administrator for the necessary networking software. • Problem: The adapter stops working for no apparent reason. Solution: The network driver files might be corrupt or missing. • Problem: My computer is a Gigabit Ethernet model and I use a speed of 1000 Mbps, the connection fails or errors occur. Solution: – Use Category 5 wiring and ensure that the network cable is securely connected.
ThinkPad pointing device problems • Problem: The pointer drifts when the computer is turned on or after it resumes normal operation. Solution: The pointer might drift when you are not using the TrackPoint pointing device during normal operation. This is a normal characteristic of the TrackPoint pointing device and is not a defect.
– The ac power adapter is connected to the computer and the power cord is plugged into a working electrical outlet. – The computer is turned on. (Press the power button again for confirmation.) – The brightness level of the screen is appropriately set. If a power-on password is set, press any key to display the prompt for the power-on password and then type the correct password and press Enter. If these items are correctly set, and the screen remains blank, have the computer serviced.
5. If more than two monitor types are displayed, select Generic PnP Monitor or Generic Non-PnP Monitor. 6. Click Properties. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 7. Click the Driver tab. 8. Click Update Driver. 9. Click Browse my computer for driver software, and then click Let me pick from a list of device drivers on my computer. 10. Clear the Show compatible hardware check box. 11.
1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical outlet. 2. Turn on the external monitor and the computer. 3. Right-click on the desktop, and click Display settings ➙ Advanced display settings. Note: If your computer cannot detect the external monitor, click Detect in the Display window. 4. Click the icon for the appropriate monitor (Monitor-2 icon is for the external monitor). 5. Click Display adapter properties. 6. Click the Monitor tab. 7.
1. Go to Control Panel, and ensure that you view Control Panel by Category. 2. Click Hardware and Sound. 3. Click Sound. 4. Click the Recording tab in the Sound window. 5. Select Microphone, and click the Properties button. 6. Click the Levels tab, and move the Microphone Boost slider upwards. 7. Click OK. Note: For more information about controlling volume, see your Windows online help. • Problem: I cannot move the volume slider or balance slider. Solution: The slider might be grayed out.
9. Play any sound through the music program. Ensure that sound comes from the headphone attached directly to the system. For more information, see the help information system of the SmartAudio program. Note: The Volume Mixer window of SmartAudio displays all audio devices detected in the system, such as speakers for a playback device, or a built-in microphone for a recording device. A check mark beside the audio device shows that the device has been selected.
1. Ensure that the connection of the ac power adapter is correct. For instructions on how to connect the ac power adapter, see “Using the ac power adapter” on page 21. 2. If the connection of the ac power adapter is correct, turn off the computer, and then disconnect the ac power adapter and remove the removable battery. 3. Reinstall the battery and reconnect the ac power adapter, and then turn on the computer. 4.
Sleep and hibernation problems • Problem: The computer enters sleep mode unexpectedly. Solution: If the microprocessor overheats, the computer automatically enters sleep mode to allow the computer to cool and to protect the microprocessor and other internal components. Check the settings for sleep mode. • Problem: The computer enters sleep mode immediately after the power-on self-test. Solution: Ensure that: – The battery is charged. – The operating temperature is within the acceptable range.
– When you carry the hard disk drive – When you carry your computer This is a normal characteristic of a hard disk drive and is not a defect. • Problem: The hard disk drive does not work. Solution: On the Startup menu of ThinkPad Setup, ensure that the hard disk drive is on the Boot priority order list. If it is on the Excluded from boot order list, it is disabled. Select the entry for it on the list and press Shift+1 to move it back to the Boot priority order list.
72 E470, E470c, and E475 User Guide
Chapter 7. Recovery information This chapter provides information about the Windows recovery solutions on the Windows 10 operating system. Resetting your computer If your computer does not perform well, you might consider resetting your computer. In the resetting process, you can choose to keep your files or remove them, and then reinstall the Windows operating system. To reset your computer, do the following: Note: The items in the graphical user interface (GUI) might change without notice. 1.
It is recommended that you create a recovery USB drive as early as possible. If you did not create a recovery USB drive as a precautionary measure, you can contact Lenovo Customer Support Center and purchase one from Lenovo. For a list of the Lenovo Support phone numbers for your country or region, go to: http://www.lenovo.com/support/phone Creating a recovery USB drive To create a recovery USB drive, you need a USB drive with at least 16 GB of storage capacity.
Chapter 8. Replacing devices This chapter provides instructions on how to install or replace hardware for your computer. Static electricity prevention Static electricity, although harmless to you, can seriously damage computer components and options. Improper handling of static-sensitive parts can cause damage to the part. When you unpack an option or a Customer Replaceable Unit (CRU), do not open the static-protective package until the instructions direct you to install the part.
5. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off automatically. Wait three to five minutes to let the computer cool. Replacing the bottom cover Before you start, read “Important safety information” on page v and print the following instructions. To replace the bottom cover, do the following: 1. Disable the built-in battery. See “Disabling the built-in battery” on page 75. 2.
Attention: • Before you start the replacement, touch a grounded metal object. This action reduces any static electricity from your body. Static electricity might damage the memory module. • Do not touch the contact edge of the memory module. Otherwise the memory module might get damaged. To replace the memory module, do the following: 1. Disable the built-in battery. See “Disabling the built-in battery” on page 75. 2. Ensure that the computer is turned off and disconnected from ac power and all cables. 3.
6. Open the latches on both sides of the memory slot at the same time 1 , and then remove the memory module 2 . Note: A film might cover the memory module. To access the memory module, open the film first. 7. Insert the new memory module into the memory slot at an angle of about 20 degrees 1 . Pivot the memory module downward until it snaps into place 2 . Ensure that the memory module is firmly installed in the memory slot and cannot be moved easily.
8. Connect the main battery connector. 9. Reinstall the bottom cover. See “Replacing the bottom cover” on page 76. 10. Turn the computer over. Connect the ac power adapter and all cables to the computer. Replacing the internal storage drive Before you start, read “Important safety information” on page v and print the following instructions. Attention: The internal storage drive (such as hard disk drive, solid-state drive, or hybrid drive) is sensitive.
5. Disconnect the main battery connector and the internal storage drive cable. 6. Remove the screw that secures the storage drive. 7. Remove the storage drive together with its bracket by the cable as shown.
8. Remove the storage drive from the bracket. 9. Install the bracket to the new internal storage drive. 10. Install the new storage drive and pivot it downward. Ensure that the new storage drive is seated in place. Chapter 8.
11. Install the screw 1 to secure the new storage drive. 12. Connect the internal storage drive cable and then connect the main battery connector. 13. Reinstall the bottom cover. See “Replacing the bottom cover” on page 76. 14. Turn the computer over. Connect the ac power adapter and all cables. Replacing the coin-cell battery Before you start, read “Important safety information” on page v and print the following instructions.
• Do not drop, crush, puncture the battery, or make it subject to strong forces. Battery abuse or mishandling can cause the battery to overheat, which can cause gasses or flame to "vent" from the battery or coin-cell battery. To replace the coin-cell battery, do the following: 1. Disable the built-in battery. See “Disabling the built-in battery” on page 75. 2. Ensure that the computer is turned off and disconnected from ac power and all cables. 3. Close the computer display and turn the computer over. 4.
6. Detach the connector 1 and remove the coin-cell battery 2 . 7. Install the new coin-cell battery 1 and attach the connector 2 .
8. Connect the main battery connector. 9. Reinstall the bottom cover. See “Replacing the bottom cover” on page 76. 10. Turn the computer over. Connect the ac power adapter and all cables to the computer. Attention: After you replace the coin-cell battery, reset the system date and time in the ThinkPad Setup program. See “Date/Time menu” on page 50. Chapter 8.
86 E470, E470c, and E475 User Guide
Chapter 9. Getting support This chapter provides information about getting help and support from Lenovo. Before you contact Lenovo Often, you can solve your computer problems by referring to the information in the explanations of error codes, running diagnostic programs, or by consulting the Lenovo Support Web site. Registering your computer Register your computer with Lenovo. For more information, see “Registering your computer” on page 13.
Microsoft Service Packs are the latest software source for Windows product updates. They are available through Web download (connection charges might apply) or through discs. For more specific information and links, go to https://www.microsoft.com. Lenovo offers technical assistance with installation of, or questions related to, Service Packs for your Lenovo-preinstalled Microsoft Windows product. For more information, contact the Customer Support Center.
• Changes, modifications, or upgrades to device drivers • Installation and maintenance of network operating systems (NOS) • Installation and maintenance of programs For the terms and conditions of the Lenovo Limited Warranty that apply to your Lenovo hardware product, see “Warranty information” in the Safety, Warranty, and Setup Guide that comes with your computer. If possible, be near your computer when you make your call.
90 E470, E470c, and E475 User Guide
Appendix A. Regulatory information This chapter provides regulatory and compliance information about Lenovo products. Certification-related information Product name: ThinkPad E470, ThinkPad E470c, and ThinkPad E475 Compliance ID: TP00083A and TP00083B (for India only) Machine types: 20H1, 20H2, 20H3, and 20H4 The latest compliance information is available at: http://www.lenovo.com/compliance Wireless-related information This topic provides wireless-related information about Lenovo products.
Locating the UltraConnect wireless antennas ThinkPad notebook computers feature an integrated UltraConnect™ wireless antenna system built into the display for optimal reception, enabling wireless communication wherever you are.
If your computer is shipped without the Regulatory Notice, you can find it on the Web site at: http://www.lenovo.com/support Export classification notice This product is subject to the United States Export Administration Regulations (EAR) and has an Export Classification Control Number (ECCN) of 5A992.c. It can be re-exported except to any of the embargoed countries in the EAR E1 country list.
European Union - Compliance to the Electromagnetic Compatibility (EMC) Directive or Radio Equipment Directive Models without a radio device: This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC (until 19 April, 2016) and Council Directive 2014/30/EU (from 20 April, 2016) on the approximation of the laws of the Member States relating to electromagnetic compatibility.
Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4: Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse B. Korea Class B compliance statement Japan VCCI Class B compliance statement Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase Japan notice for ac power cord The ac power cord shipped with your product can be used only for this specific product. Do not use the ac power cord for other devices.
96 E470, E470c, and E475 User Guide
Appendix B. WEEE and recycling statements This chapter provides environmental information about Lenovo products. General recycling information Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information about recycling Lenovo products, go to: http://www.lenovo.
Japan recycling statements Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources. Computers and monitors are categorized as industrial waste and should be properly disposed of by an industrial waste disposal contractor certified by a local government.
Equipamentos elétricos e eletrônicos não devem ser descartados em lixo comum, mas enviados à pontos de coleta, autorizados pelo fabricante do produto para que sejam encaminhados e processados por empresas especializadas no manuseio de resíduos industriais, devidamente certificadas pelos orgãos ambientais, de acordo com a legislação local. A Lenovo possui um canal específico para auxiliá-lo no descarte desses produtos.
operator, and follow their instructions. You also can refer to the instructions provided in the user guide for your product. For proper collection and treatment, go to: http://www.lenovo.
Appendix C. Restriction of Hazardous Substances (RoHS) Directive The latest environmental information about Lenovo products is available at: http://www.lenovo.com/ecodeclaration European Union RoHS This Lenovo product, with included parts (cables, cords, and so on) meets the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("RoHS recast" or "RoHS 2").
China RoHS 102 E470, E470c, and E475 User Guide
Taiwan RoHS Appendix C.
104 E470, E470c, and E475 User Guide
Appendix D. ENERGY STAR model information ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices. Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation. You might find an ENERGY STAR mark affixed on the computer or displayed on the power settings interface.
5. Clear the Allow this device to wake the computer check box. 6. Click OK.
Appendix E. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux agreement(s) which may accompany software included with this product. Lenovo may update this document at any time without notice. To obtain the most up-to-date documentation for your computer, go to: http://www.lenovo.
Appendix F. Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Active Protection System Lenovo Lenovo logo ThinkPad ThinkPad logo TrackPoint UltraConnect Intel, Intel SpeedStep, and Thunderbolt are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Microsoft, Windows, Direct3D, BitLocker, and Cortana are trademarks of the Microsoft group of companies.
110 E470, E470c, and E475 User Guide
