Operation Manual
Table Of Contents
- Important safety information
- Read this first
- Important information about using your computer
- Conditions that require immediate action
- Service and upgrades
- Power cords and power adapters
- Extension cords and related devices
- Plugs and outlets
- Power supply statement
- External devices
- General battery notice
- Notice for built-in rechargeable battery
- Notice for non-rechargeable coin-cell battery
- Heat and product ventilation
- Electrical current safety information
- Liquid crystal display (LCD) notice
- Using headphones or earphones
- Choking hazard notice
- Plastic bag notice
- Glass parts notice
- Chapter 1. Product overview
- Chapter 2. Using your computer
- Registering your computer
- Frequently asked questions
- Operating modes
- Using the multi-touch screen
- Using the special keys
- Using the ThinkPad pointing device
- Power management
- Cabled Ethernet connections
- Wireless connections
- Using audio features
- Using the cameras
- Using a media card
- Using an external display
- Traveling with your computer
- Chapter 3. Enhancing your computer
- Chapter 4. Accessibility, ergonomic, and maintenance information
- Chapter 5. Security
- Chapter 6. Advanced configuration
- Chapter 7. Troubleshooting computer problems
- General tips for preventing problems
- Diagnosing problems with Lenovo Companion
- Troubleshooting
- Computer stops responding
- Spills on the keyboard
- Error messages
- Beep errors
- Memory module problems
- Ethernet problems
- Wireless-LAN problem
- Bluetooth problem
- ThinkPad pointing device problems
- Keyboard problems
- Computer screen problems
- External monitor problems
- Audio problems
- Fingerprint reader problems
- Battery problems
- ac power adapter problem
- Power problems
- Power button problem
- Boot problems
- Sleep and hibernation problems
- Solid-state drive problem
- ThinkPad Pen Pro problem
- Software problem
- USB problem
- Chapter 8. Recovery information
- Chapter 9. Replacing devices
- Chapter 10. Getting support
- Appendix A. Supplemental information about the Ubuntu operating system
- Appendix B. Regulatory information
- Certification-related information
- Wireless-related information
- TCO certification
- Export classification notice
- Electronic emission notices
- Federal Communications Commission Declaration of Conformity
- Industry Canada Class B emission compliance statement
- European Union conformity
- German Class B compliance statement
- Japan VCCI Class B compliance statement
- Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase
- Japan notice for ac power cord
- Lenovo product service information for Taiwan
- Eurasian compliance mark
- Brazil audio notice
- Appendix C. WEEE and recycling statements
- Appendix D. Restriction of Hazardous Substances (RoHS) Directive
- Appendix E. ENERGY STAR model information
- Appendix F. Notices
- Appendix G. Trademarks
Configuring ThinkPad Setup
The ThinkPad Setup program menu lists various items about system configuration.
Attention: The default configurations are already optimized for you. Improper change of the configurations
might cause unexpected results.
To configure ThinkPad Setup, do the following:
1. Restart the computer. When the logo screen is displayed, press F1. The ThinkPad Setup program starts.
Note: If you are required to enter the supervisor password, enter the correct password. You also can
press Enter to skip the password prompt and start the ThinkPad Setup program. If you do not enter the
password, you cannot change the configurations that are protected by the supervisor password.
2. Use the arrow keys to select a tab; or use the arrow keys to locate an item and press Enter to select it.
Then the supported submenu is displayed.
3. Default values are in boldface. Set the value of an item by doing one of the following:
• Press F6 to change to a higher value.
• Press F5 to change to a lower value.
4. Press the Esc key to exit the submenu and return to the parent menu. Then use the same method
mentioned above to change other configurations.
5. When you complete the configuration, press F10 to save and exit. You also can select the Restart tab in
the ThinkPad Setup menu, and restart your computer with one of the provided options.
You can press F9 to restore to the default settings.
Changing the startup sequence
In some cases, you might have to change the startup sequence so that the computer starts from a desired
device when powered on. Read this topic to learn how to change the computer startup sequence.
Attention:
• After you change the startup sequence, ensure that you select the correct device during a copy, a save, or
a format operation. If you select the wrong device, the data on that device might be erased or overwritten.
• If you are using the Windows BitLocker Drive Encryption feature and your computer has a Trusted
Platform Module, do not change the startup sequence. BitLocker Drive Encryption locks the computer
when it detects the change of startup sequence.
To change the startup sequence, do the following:
1. Access the ThinkPad Setup program and select Startup ➙ Boot. Then press Enter. The default device
order list is displayed.
2. Set the startup sequence as you desired.
3. Press F10 to save the changes and restart the system.
You also can change the startup sequence temporarily by doing the following:
1. Turn off the computer.
2. Turn on the computer. When the logo screen is displayed, press the F12 key.
3. Select the device that you want the computer to start from. Then press Enter.
Note: The Boot menu will be displayed if the computer cannot start from any devices or the operating
system cannot be found.
Chapter 6. Advanced configuration 57