L570 User Guide
Note: Before using this information and the product it supports, be sure to read and understand the following: • Safety, Warranty, and Setup Guide • “Important safety information” on page v The latest Safety, Warranty, and Setup Guide and the Regulatory Notice are available on the Lenovo Support Web site at: http://www.lenovo.com/support Third Edition (June 2017) © Copyright Lenovo 2017.
Contents Important safety information . . . . . . v Read this first . . . . . . . . . . . . . . . Important information about using your computer . Conditions that require immediate action . . . . Service and upgrades . . . . . . . . . . . . Power cords and power adapters . . . . . . . Extension cords and related devices . . . . . . Plugs and outlets. . . . . . . . . . . . . . Power supply statement . . . . . . . . . . . External devices . . . . . . . . . . . . . . General battery notice . . . . . . . . . .
Setting, changing, or removing a password Hard disk security . . . . . . . . . . . . Setting the security chip . . . . . . . . . . Using the fingerprint reader. . . . . . . . . Deleting data from your storage drive . . . . . Using firewalls . . . . . . . . . . . . . . Protecting data against viruses . . . . . . . . . . . . . . 50 50 51 52 54 55 55 Chapter 6. Advanced configuration . . 57 Installing a new operating system . . . . . . Installing the Windows 7 operating system .
Federal Communications Commission Declaration of Conformity . . . . . . . . Industry Canada Class B emission compliance statement . . . . . . . . . . . . . . . European Union conformity . . . . . . . . German Class B compliance statement . . . Japan VCCI Class B compliance statement . . Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase . . . . . . . . . . . . . . . . Japan notice for ac power cord . . . . . .
iv L570 User Guide
Important safety information Note: Read the important safety information first. Read this first This information can help you safely use your notebook computer. Follow and retain all information included with your computer. The information in this document does not alter the terms of your purchase agreement or the Limited Warranty. For more information, see "Warranty Information" in the Safety, Warranty, and Setup Guide that comes with your computer. Customer safety is important.
Prevent your computer from getting wet. To avoid spills and the danger of electrical shock, keep liquids away from your computer. Protect the cables from being damaged. Applying strong force to cables may damage or break them.
Conditions that require immediate action Products can become damaged due to misuse or neglect. Some product damage is serious enough that the product should not be used again until it has been inspected and, if necessary, repaired by an authorized servicer. As with any electronic device, pay close attention to the product when it is turned on. On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you might hear sounds like popping, cracking, or hissing.
sure that the power is turned off and that the product is unplugged from any power source. If you have any questions or concerns, contact the Customer Support Center. Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety. CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool.
To prevent possible overheating, do not cover the power adapter with clothing or other objects when the power adapter is plugged into an electrical outlet. Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should not exceed the power strip input rating.
Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. External devices CAUTION: Do not connect or disconnect any external device cables other than Universal Serial Bus (USB) and 1394 cables while the computer power is on; otherwise, you might damage your computer.
Notice for removable rechargeable battery DANGER Only recharge the battery strictly according to instructions included in the product documentation. If the battery is incorrectly replaced, there is danger of an explosion. The battery contains a small amount of harmful substances. Notice for non-rechargeable coin-cell battery DANGER If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The battery contains a small amount of harmful substance.
• When the ac power adapter is connected to an electrical outlet and your computer, it generates heat. Do not place the adapter in contact with any part of your body while using it. Never use the ac power adapter to warm your body. Extended contact with your body, even through clothing, may cause a skin burn. For your safety, always follow these basic precautions with your computer: • Keep the cover closed whenever the computer is plugged in.
The power cord must be disconnected from the wall outlet or receptacle before installing all other electrical cables connected to the computer. The power cord may be reconnected to the wall outlet or receptacle only after all other electrical cables have been connected to the computer. DANGER During electrical storms, do not perform any replacement and do not connect the telephone cable to or disconnect it from the telephone outlet on the wall.
limits the computer’s maximum wide band true RMS output voltage to 150 mV. To help protect against hearing loss, ensure that the headphones or earphones you use also comply with EN 50332-2 (Clause 7 limits) for a wide band characteristic voltage of 75 mV. Using headphones that do not comply with EN 50332-2 can be dangerous due to excessive sound pressure levels.
Chapter 1. Product overview This chapter provides basic information to help you get familiar with your computer. Computer controls, connectors, and indicators This section introduces hardware features of the computer.
If your computer is unresponsive, you can turn off the computer by pressing and holding the power button for four or more seconds. If the computer cannot be turned off, see “Computer stops responding” on page 76. You also can define what the power button does. For example, by pressing the power button, you can turn off the computer or put the computer into sleep or hibernation mode. To change what the power button does, do the following: 1.
4 Always On USB 3.0 connector By default, the Always On USB 3.0 connector enables you to charge USB-compatible devices in the following situations: • When your computer is on or in sleep mode • When your computer is off or in hibernation mode, but connected to ac power Attention: When you attach a USB cable to this connector, ensure that the USB mark is facing upward. Otherwise the connector might get damaged.
2 Smart-card slot (available on some models) You can use smart cards for authentication, data storage, and application processing. Within large organizations, you might also use smart cards for strong security authentication of single sign-on (SSO). For more information, see “Using an ExpressCard, a media card, or a smart card” on page 29. 3 Optical-drive bay An optical drive might be installed in the optical-drive bay. 4 USB 3.0 connectors You can use the USB 3.
The Ethernet connector has two network status indicators. When the green indicator is on, the computer is connected to a LAN. When the yellow indicator blinks, data is being transmitted. Note: If the computer is connected to a docking station, use the Ethernet connector on the docking station instead of the one on the computer. 2 Fan louvers The fan louvers and internal fan enable air to circulate in the computer to ensure proper cooling, especially the cooling of the microprocessor.
4 Speakers Your computer is equipped with a pair of stereo speakers. 5 Keyboard drainage holes If you accidentally spill water or drink over the keyboard, the keyboard drainage holes can help drain out liquid from your computer. Status indicators This topic provides information about locating and identifying the various status indicators on your computer. Note: Depending on the model, your computer might look different from the following illustrations.
3 Microphone-mute indicator When this indicator is on, the microphones are muted. 4 Camera status indicator When this indicator is on, the camera is in use. 5 6 System status indicators The indicator in the ThinkPad logo on the computer lid and the indicator in the power button show the system status of your computer. • Blinks for three times: The computer is initially connected to power. • On: The computer is on (in normal mode). • Off: The computer is off or in hibernation mode.
FCC ID and IC Certification number The FCC and IC Certification information is identified by a label on the computer as shown in the following illustration. The content of this label differs depending on the wireless modules that come with your computer: • For a preinstalled wireless module, this label identifies the actual FCC ID and IC certification number for the wireless module installed by Lenovo. Note: Do not remove or replace a preinstalled wireless module by yourself.
Note: For the user-installable wireless module, ensure that you use only Lenovo-authorized wireless modules for the computer. Otherwise, an error message will be displayed and the computer will beep when you turn on the computer. Labels for the Windows operating systems Windows 7 Certificate of Authenticity: Computer models preinstalled with the Windows 7 operating system have a Certificate of Authenticity label affixed to the computer cover or inside the battery compartment.
a Windows 10 product is installed, the installation program checks the computer firmware for a valid, matching Product ID to complete the activation. In some cases, an earlier Windows version might be preinstalled under the terms of the Windows 10 Pro license downgrade rights. Computer features The computer features introduced in this topic cover various models. Some computer features might be available only on specific models.
• Optical-drive bay • Smart-card slot (available on some models) • VGA connector Security features • Fingerprint reader (available on some models) • Security-lock slot • Security chip Wireless features • Bluetooth • Global Positioning System (GPS) satellite receiver (available on models with wireless WAN) • Wireless LAN • Wireless WAN (available on some models) Others • Camera (available on some models) • Microphones (available on some models) Computer specifications Size • Width: 377 mm (14.
• At altitudes above 2438 m (8000 ft) – Maximum temperature when operating under the unpressurized condition: 31.3°C (88°F) Note: When you charge the battery, its temperature must be at least 10°C (50°F). Relative humidity • Operating: 8% to 95% at wet-bulb temperature 23°C (73°F) • Storage: 5% to 95% at wet-bulb temperature 27°C (81°F) If possible, place your computer in a well-ventilated and dry area without direct exposure to sunshine.
Access Connections™ (Windows 7) This program is a connectivity assistant for creating and managing location profiles. Each location profile stores network settings required for connecting to a network infrastructure from a specific location such as home or office. This program enables you to switch between location profiles when you move your computer from place to place.
Mobile Broadband Connect This program enables you to connect the computer to the mobile broadband network through a supported wireless-WAN card. (Windows 7) Power Manager (Windows 7) System Update (Windows 7) This program provides convenient, flexible, and complete power management for the computer. It enables you to adjust your computer power settings to achieve the best balance between performance and power saving.
Chapter 2. Using your computer This chapter provides information to help you use the various features provided by your computer. Registering your computer When you register your computer, information is entered into a database, which enables Lenovo to contact you if there is a recall or other severe problem. In addition, some locations offer extended privileges and services to registered users.
• If your computer will be turned off for an extended period of time, you can prevent battery power from draining by removing the battery. How do I securely dispose of data stored on the internal storage drive? • Study “Security” on page 49 to find out how you can protect your computer from theft and unauthorized use. • Before you dispose of the data on the internal storage drive, ensure that you read “Deleting data from your storage drive” on page 54.
1 Numeric keypad You can use this numeric keypad to type in numbers quickly. 2 Windows logo key Press the Windows logo key to open the Start menu. For information about using the Windows logo key with other keys, see the help information system of the Windows operating system. 3 4 Fn key and function keys You can configure the Fn key and function keys in the Keyboard Properties window by doing the following: 1.
• Open a keyboard setting page. • Invoke the function defined by yourself. If no function is defined, the following default function works: – For Windows 7: Open the search box. – For Windows 10: Open the Cortana personal assistant. To define or change the function, do the following: – For Windows 7: 1. Open Control Panel, and then change the view of Control Panel from Category to Large icons or Small icons. 2. Click Lenovo - Keyboard Manager.
The ThinkPad pointing device consists of the following devices: 1 TrackPoint pointing device 2 Trackpad Note: Depending on the model, your TrackPoint pointing device and the trackpad might look different from the illustration in this topic. By default, both the TrackPoint pointing device and the trackpad are active with the touch gestures enabled. To change the settings, see “Customizing the ThinkPad pointing device” on page 22.
To use the TrackPoint pointing device, see the following instructions: Note: Place your hands in the typing position and use your index finger or middle finger to apply pressure to the pointing-stick nonslip cap. Use either thumb to press the left-click button or right-click button. • Point Use the pointing stick 1 to move the pointer on the screen. To use the pointing stick, apply pressure to the pointing-stick nonslip cap in any direction parallel to the keyboard.
To use the trackpad, see the following instructions: • Point Slide one finger across the surface of the trackpad to move the pointer accordingly. • Left-click Press the left-click zone 1 to select or open an item. You also can tap anywhere on the surface of the trackpad with one finger to perform the left-click action. • Right-click Press the right-click zone 2 to display a shortcut menu. You also can tap anywhere on the surface of the trackpad with two fingers to perform the right-click action.
• Depending on the model, the trackpad on your computer might look different from the illustrations in this topic. Tap Two-finger tap Tap anywhere on the trackpad with one finger to select or open an item. Tap anywhere on the trackpad with two fingers to display a shortcut menu. Two-finger scroll Two-finger zoom out Put two fingers on the trackpad and move them in the vertical or horizontal direction. This action enables you to scroll through the document, Web site, or apps.
Power management This section provides information about how to use ac power and battery power to achieve the best balance between performance and power management. Using the ac power adapter The power to run your computer can come either from the battery or from ac power. While you use ac power, the battery charges automatically. Your computer comes with an ac power adapter and a power cord. • ac power adapter: Converts ac power for notebook computer use.
Checking the battery status Move your pointer to the battery-status icon in the Windows notification area to check the battery status. The battery-status icon displays the percentage of battery power remaining and how long you can use your computer before you must charge the battery. The rate at which you use battery power determines how long you can use the battery of your computer between charges.
Maximizing the battery life To maximize the life of the battery, do the following: • Use the battery until the charge is depleted. • Recharge the battery completely before using it. You can see whether the battery is fully charged from the battery-status icon in the Windows notification area. • Always use power management features such as power-saving modes. Managing the battery power To achieve the best balance between performance and power saving, adjust your power plan settings.
2. Click Administrative Tools. 3. Double-click Task Scheduler. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4. From the left pane, select the task folder for which you want to enable the wake-up function. The scheduled tasks are displayed. 5. Click a scheduled task, and then click the Conditions tab. 6. Under Power, select Wake the computer to run this task.
Tips on using the wireless-LAN feature To achieve the best connection, use the following guidelines: • Place your computer so that there are as few obstacles as possible between the wireless-LAN access point and the computer. • Open your computer cover to an angle of slightly more than 90 degrees. Checking the wireless-LAN connection status You can check the wireless-LAN connection status through the wireless-network-connection-status icon in the Windows notification area.
• Remotely controlling and communicating with devices such as mobile phones Depending on the model, your computer might support the Bluetooth feature. To transfer data through the Bluetooth feature, do the following: Note: It is not recommended to use the wireless feature (the 802.11 standards) of your computer simultaneously with a Bluetooth option. The data transmission speed can be delayed and the performance of the wireless feature can be degraded. 1. Ensure that the Bluetooth feature is enabled.
• Headset with a 3.5-mm (0.14-inch), 4-pole plug: Headphone and microphone functions • Conventional headphone: Headphone function Note: The conventional microphone is not supported. Using the camera If your computer has a camera, you can use the camera to preview your video image and take a snapshot of your current image. To start the camera, do the following: • For Windows 7: Start the Communications Utility program. See “Accessing Lenovo programs” on page 12.
Supported media card types The media-card reader on your computer only supports the following media cards: Note: Your computer does not support the content protection for recordable media (CPRM) feature for the SD card. • MultiMediaCard (MMC) • Secure Digital (SD) card • Secure Digital eXtended-Capacity (SDXC) card • Secure Digital High-Capacity (SDHC) card Supported smart card type You can use smart cards for authentication, data storage, and application processing.
1. Go to Control Panel. 2. View Control Panel by Category. Click Hardware and Sound. 3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts. 5. Follow the instructions on the screen. Removing an ExpressCard, a media card, or a smart card Attention: • Before removing a card, stop the card first.
1. Connect the external display to an appropriate video connector on your computer, such as the Mini DisplayPort connector or VGA connector. 2. Connect the external display to an electrical outlet. 3. Turn on the external display. If your computer cannot detect the external display, right-click on the desktop, and then click Screen resolution/Display settings ➙ Detect.
Traveling with your computer This topic provides information to help you work with your computer when you are traveling. Use the following travel tips to travel more confidently and efficiently with your computer. • When your computer goes through the x-ray machines at airport security stations, it is important to keep your eyes on the computer at all times to prevent theft. • Consider bringing an electrical adapter for use on an airplane or automobile.
34 L570 User Guide
Chapter 3. Enhancing your computer This chapter provides instructions on how to use hardware devices to expand your computer capabilities. Finding ThinkPad options If you want to expand the capabilities of your computer, Lenovo has a number of hardware accessories and upgrades to meet your needs. Options include memory modules, storage devices, network cards, port replicators or docking stations, batteries, power adapters, keyboards, mice, and more. To shop at Lenovo, go to: http://www.lenovo.
1 Always On USB 2.0 connector: Connect USB-compatible devices or charge some mobile digital devices and smartphones. 2 USB 2.0 connectors 3 USB 3.0 connector Connect USB-compatible devices, such as a USB keyboard, a USB mouse, a USB storage device, or a USB printer. 4 Ethernet connector: Connect the docking station to an Ethernet LAN. Note: When your computer is attached to the docking station, always use the Ethernet connector or the external monitor connector on the docking station.
3 Docking status indicator: This indicator turns on when the computer is attached to the docking station properly. 4 Eject button: Press the eject button to eject the computer from the docking station. 5 Adjuster: Use the adjuster as a guide to align the computer with the docking station. 6 Docking station connector: Connect the docking station to the computer. 7 System lock: Use the system lock to lock or unlock the eject button.
To connect a DVI monitor, do the following: 1. Turn off the computer. 2. Connect the DVI monitor to the DVI connector. Then connect the monitor to an electrical outlet. 3. Turn on the DVI monitor and then the computer. 8 VGA connector: Connect the computer to a VGA-compatible video device, such as a VGA monitor. 9 Audio connector: Connect headphones or a headset with a 3.5-mm (0.14-inch), 4-pole plug.
1 Always On USB 2.0 connector: Connect USB-compatible devices or charge some mobile digital devices and smartphones. 2 USB 2.0 connectors 3 USB 3.0 connectors Connect USB-compatible devices, such as a USB keyboard, a USB mouse, a USB storage device, or a USB printer. 4 Ethernet connector: Connect the docking station to an Ethernet LAN. Note: When your computer is attached to the docking station, always use the Ethernet connector or the external monitor connector on the docking station.
Attaching a docking station to your computer Attention: When the computer is attached to a docking station, do not pick up the assembly by taking hold of the computer only. Always hold the whole assembly. Otherwise the docking station might drop down. To attach the docking station to your computer, do the following: Note: The ThinkPad Basic Dock does not have the system lock. 1. Disconnect all cables and devices from the computer.
To detach the docking station from your computer, do the following: Note: The ThinkPad Basic Dock does not have the system lock. 1. Disconnect all cables and devices from the computer and the docking station. 2. Turn the system lock key to the unlocked position (horizontal). 3. Press the eject button to eject the computer 1 , and then grasp both sides of the computer to remove it 2.
– ThinkPad Pro Dock – ThinkPad Ultra Dock • For the ThinkPad Ultra Dock, a maximum of three displays (including your computer display) can work at the same time. As a result, if you connect three external displays to the ThinkPad Ultra Dock, the display connected to the VGA connector will not work when your computer display is on.
Chapter 4. Accessibility, ergonomic, and maintenance information This chapter provides information about accessibility, ergonomic, and cleaning and maintenance. Accessibility information Lenovo is committed to providing users who have hearing, vision, and mobility limitations with greater access to information and technology. This section provides information about the ways these users can get the most out of their computer experience.
• On-Screen Keyboard If you prefer to type or enter data into your computer using a mouse, joystick, or other pointing device instead of a physical keyboard, you can use On-Screen Keyboard. On-Screen Keyboard displays a visual keyboard with all the standard keys. You can select keys using the mouse or another pointing device, or you can tap to select the keys if your computer supports multi-touch screen.
Customizable item size You can make the items on your screen easier to read by changing the item size. • To change the item size temporarily, use the Magnifier tool in Ease of Access Center. • To change the item size permanently, do the following: – Change the size of all the items on your screen. 1. Go to Control Panel, and ensure that you view Control Panel by Category. 2. Click Appearance and Personalization ➙ Display. 3. Change the item size by following the instructions on the screen. 4. Click Apply.
General posture: Make minor modifications in your working posture to deter the onset of discomfort caused by long periods of working in the same position. Frequent short breaks from your work also help to prevent minor discomfort associated with your working posture. Display: Position the display to maintain a comfortable viewing distance of 510 mm to 760 mm (20 inches to 30 inches). Avoid glare or reflections on the display from overhead lighting or outside sources of light.
• Do not turn your computer over when the ac power adapter is plugged in, otherwise, it could break the adapter plug. • Before moving your computer, be sure to remove any media, turn off attached devices, and disconnect cords and cables. • When picking up your open computer, hold it by the bottom. Do not pick up or hold your computer by the display. • Only an authorized ThinkPad repair technician should disassemble and repair your computer.
48 L570 User Guide
Chapter 5. Security This chapter provides information about how to protect your computer from unauthorized use. Using passwords You can help prevent your computer from unauthorized use by using passwords. After you set a password, a prompt is displayed on the screen each time you turn on the computer. Enter your password at the prompt. You cannot use the computer unless you type the correct password.
• Master hard disk password The master hard disk password also requires a user hard disk password. The master hard disk password is set and used by a system administrator. It enables the administrator to access any storage drive in a system like a master key. The administrator sets the master password; then assign a user password for each computer in the network. The user can then change the user password as desired, but the administrator still can get access by using the master password.
• Set a power-on password as well as a hard disk password. For security, a longer password is recommended. • The hard disk drive built into your computer can be protected by UEFI BIOS. To provide reliable security, use the security chip and a security program with the Trusted Platform Module (TPM) management feature. See “Setting the security chip” on page 51.
4. Move to an item you want to set by using the directional keys. When the item is highlighted, press Enter. 5. Set other items that you want to set. 6. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changes and exit. Notes: • Ensure that the supervisor password has been set in ThinkPad Setup. Otherwise anyone can change the settings for the security chip.
Indicator behavior of the fingerprint reader 1 Off: The fingerprint reader is not ready for tapping. 2 Solid green: The fingerprint reader is ready for tapping. 3 Amber, blinking: The fingerprint cannot be authenticated. Associating your fingerprints with your power-on password and hard disk password To associate your fingerprints with your power-on password and hard disk password, manually create a connection by doing the following: 1. Turn off and then turn on the computer. 2.
• Scratching the surface of the reader with a hard, pointed object. • Scraping the surface of the reader with your fingernail or anything hard. • Using or touching the reader with a dirty finger. If you notice any of the following conditions, gently clean the surface of the reader with a dry, soft, lint-free cloth: • The surface of the reader is dirty or stained. • The surface of the reader is wet. • The reader often fails to enroll or authenticate your fingerprint.
Some computers might support a Disk Encryption hard disk drive or Encryption solid-state drive and have such a drive installed. You can logically dispose of all the data on the drive in a short time by erasing the cryptographic key. The data encrypted with the old key is not physically erased but remains on the drive; however, it cannot be decrypted without the old key. This feature is also available with the Drive Erase Utility for Resetting the Cryptographic Key and Erasing the Solid State Drive tool.
56 L570 User Guide
Chapter 6. Advanced configuration This chapter provides information to help you further configure the computer: Installing a new operating system In some situations, you might need to install a new operating system. This topic provides instructions on how to install a new operating system. Installing the Windows 7 operating system Before you start, print these instructions.
Notes: • If you start the installation DVD image from an external USB device or if your computer has an NVM Express drive installed, do additional configurations before you start. For more information, go to http://www.lenovo.com/support/installwin7viausb3. • If an NVM Express drive is installed, additional drivers also are required. For more information, go to https://support.microsoft.com/en-us/kb/2990941. 9. Restore the folder at C:\SWTOOLS that you backed up. 10. Install the device drivers.
8. After installing the device drivers, apply Windows Update to get the latest modules, for example the security patches. 9. Depending on your preference, install Lenovo programs. For information about Lenovo programs, see “Lenovo programs” on page 12. Note: After installing the operating system, do not change the initial UEFI/Legacy Boot setting in the ThinkPad Setup program. Otherwise, the operating system will not start correctly.
Lenovo Support Web site. Update packages can contain applications, device drivers, UEFI BIOS flashes, or software updates.
5. When you complete the configuration, press F10 to save and exit. You also can select the Restart tab in the ThinkPad Setup menu, and restart your computer with one of the provided options. You can press F9 to restore to the default settings. Changing the startup sequence In some cases, you might have to change the startup sequence so that the computer starts from a desired device when powered on. Read this topic to learn how to change the computer startup sequence.
• Config menu • Date/Time menu • Security menu • Startup menu • Restart menu Note: Depending on the model and operating system, the menu items and the default value might change without notice. Main menu When you enter the ThinkPad Setup program, you first see the Main menu as follows: Note: The BIOS menu items might change without notice. Depending on the model, the default value might vary.
Notes: – The magic packet type Wake on LAN requires that the ac power is attached. – The Wake on LAN feature does not work when the hard disk password is set. • Ethernet LAN Option ROM Values: Disabled, Enabled Description: The Ethernet LAN Option ROM enables the startup from an integrated network device. This menu is displayed only in Legacy Only boot mode or Both boot mode with Legacy first.
Description: Enable or disable the built-in TrackPoint pointing device. Note: If you want to use an external mouse, select Disabled. • Trackpad Values: Disabled, Enabled Description: Enable or disable the built-in trackpad. Note: If you want to use an external mouse, select Disabled. • Fn and Ctrl Key swap Values: Disabled, Enabled Description: If you select Enabled, the Fn key works as the Ctrl key and the Ctrl key works as the Fn key.
Description: Maximum Performance: Always the highest speed – Values: Maximum Performance, Battery Optimized Description: Battery Optimized: Always the lowest speed • Optical Drive Speed Values: High Performance, Normal, Silent Description: Set the operating speed of the optical drive. • CPU Power Management Values: Disabled, Enabled Description: Enable or disable the power-saving feature that stops the microprocessor clock automatically when there are no system activities.
Note: The default value is 60 seconds. • Console Type Values: PC-ANSI, VT100, VT100+, VT-UTF8 Description: Select the console type for AMT. This console type must match the Intel AMT remote console. Date/Time menu Note: The BIOS menu items might change without notice. Depending on the model, the default value might vary. • System Date Descriptions: Set or change the date of the system. • System Time Descriptions: Set or change the time of the system.
Values: Disabled, x characters (4 ≤ x ≤ 12) Descriptions: Specify a minimum length for power-on passwords and hard disk passwords. If a supervisor password is set, you cannot change the minimum length until you log in as a supervisor. • Power-On Password Values: Disabled, Enabled Descriptions: Set a power-on password to protect the computer from unauthorized access. For more information, see “Passwords introduction” on page 49.
Note: This item is displayed only on the TPM 1.2 support model. • Security Chip (for TPM 2.0) Values: Disabled, Enabled Descriptions: Enable or disable the security chip. • Security Chip (for TPM 1.2) Values: Active, Inactive, Disabled Descriptions: If you select Active, the security chip is functional. If you select Inactive, the Security Chip is visible, but the security chip is not functional. If you select Disabled, the Security Chip is hidden and the security chip is not functional.
Values: Disabled, Enabled Descriptions: Some computer viruses and worms cause memory buffers to overflow. By enabling this option, you can protect your computer against attacks from such viruses and worms. If the option is enabled but you find that a program does not run properly, disable this option first and then reset the settings.
Descriptions: Enable the UEFI BIOS interface to activate the computrace module. Computrace is an optional monitoring service from Absolute Software. If you select Permanently Disabled, you cannot enable this setting again. Secure Boot • Secure Boot Values: Disabled, Enabled Descriptions: Enable this option to prevent unauthorized operating systems from loading when you turn on the computer. • Platform Mode Values: Setup Mode, User Mode Descriptions: Specify the system operating mode.
Startup menu Note: The BIOS menu items might change without notice. Depending on the model, the default value might vary. • Boot Descriptions: Define the startup sequence. • Network Boot Descriptions: Select the boot device when the system wakes from LAN. If Wake On LAN is enabled, the network administrator can turn on all of the computers in a LAN remotely through network management software. • UEFI/Legacy Boot Values: Both, UEFI Only, Legacy Only Descriptions: Define the system boot capability.
Descriptions: Discard the changes and restart the computer. • Load Setup Defaults Value: Enter Descriptions: Restore to the factory default settings. Note: Enable OS Optimized Defaults to meet the Microsoft (R) Windows 8 (R) certification requirement. When you change this setting, some other settings are changed automatically, such as CSM Support, UEFI/Legacy Boot, UEFI/Legacy Boot Priority, Secure Boot, and Secure RollBack Prevention. • Discard Changes Value: Enter Descriptions: Discard the changes.
If the computer is turned on through Wake on LAN, the computer starts follow the Network Boot sequence. Asset ID EEPROM The Asset ID EEPROM contains information about the computer configuration and the serial numbers of the key components. It also includes a number of blank fields where you can record information about the end users in your network.
74 L570 User Guide
Chapter 7. Troubleshooting computer problems This chapter provides information about what to do if you experience a problem with your computer. General tips for preventing problems This topic provides the following tips to help you prevent computing problems: • Empty your recycle bin on a regular basis. • Use a disk defragment tool regularly on your storage drive to improve data seek and read times. • To free up disk space, uninstall unused programs.
Notes: • If you are using another Windows operating system rather than the Windows 7, you can find the latest information about diagnostics for your computer at: http://www.lenovo.com/diagnose • If you are unable to isolate and repair the problem yourself after running Lenovo Solution Center, save and print the log files created by the program. You need the log files when you speak to a Lenovo technical support representative. Lenovo Solution Center enables you to troubleshoot and resolve computer problems.
Solution: Do the following: 1. Press and hold the power button until the computer turns off. If you cannot turn off the computer by pressing the power button, remove the ac power adapter and the removable battery. After the computer is turned off, reconnect the ac power adapter and reinstall the removable battery, and then restart the computer by pressing the power button. If the computer does not turn on, continue with step 2. 2.
Solution: Checksum of the Security settings in the EFI Variable is not correct. Enter ThinkPad Setup to check security settings, press F10, and then press Enter to restart the system. If you still have a problem, have the computer serviced. • Message: 0187: EAIA data access error Solution: The access to EEPROM is failed. Have the computer serviced. • Message: 0188: Invalid RFID Serialization Information Area Solution: The EEPROM checksum is not correct (block # 0 and 1).
Solution: Machine UUID is invalid. Have the computer serviced. • Message: Fan error Solution: Cooling fan has failed. Shut down the computer immediately and have the computer serviced. • Message: Thermal sensing error Solution: The thermal sensor has a problem. Shut down the computer immediately and have the computer serviced. • Message: Bottom cover tamper detection error Solution: The bottom cover tamper switch is not working. Have the computer serviced.
Error codes 0001: Reset error (platform reset not de-asserted) Solutions 1. Remove all power resources (the ac power adapter, removable battery, and coin-cell battery). If your computer has a built-in battery, reset the computer by inserting a straightened paper clip into the emergency-reset hole. Wait for one minute. Then reconnect all power resources. 2. Replace the system board (service provider only). 0002: Internal bus error Replace the system board (service provider only).
Solution: Ensure that: – The cable is installed correctly. The network cable must be securely connected both to the Ethernet connector of your computer and to the RJ45 connector of the hub. The maximum allowable distance from the computer to hub is 100 m (328 ft). If the cable is connected and the distance is within the acceptable limits but the problem persists, try a different cable. – You are using the correct device driver. To install the correct driver, do the following: 1.
• Your computer is within the range of a wireless access point. • The wireless radio is enabled. Note: If you are using the Windows 7 operating system, click Show hidden icons on the taskbar. The Access Connections icon is displayed. For more information about the icon, see the Access Connections help information system. For the Windows 7 operating system, check the network name (SSID) and your encryption information. Use the Access Connections program to verify this case-sensitive information.
• Problem: The TrackPoint pointing device or trackpad does not work. Solution: Ensure that the TrackPoint pointing device or trackpad is enabled in the Mouse Properties window. For more information, see “Customizing the ThinkPad pointing device” on page 22. Keyboard problems • Problem: All or some keys on the keyboard do not work. Solution: If an external numeric keypad is connected: 1. Turn off the computer. 2. Remove the external numeric keypad. 3. Turn on the computer and try using the keyboard again.
2. Click Hardware and Sound ➙ Power Options. 3. Show the additional plans, and then select High performance. • Problem: When I turn on the computer, nothing is displayed on the screen and the computer does not beep while starting up. Note: If you are not sure whether you heard any beeps, turn off the computer by pressing and holding the power button for four seconds or more. Then turn on the computer and listen again. Solution: Ensure that: – The battery is installed correctly.
– The monitor type is correct. To check these settings, do the following: 1. Right-click on the desktop, and do the following: – For Windows 7: Click Screen resolution. – For Windows 10: Click Display settings ➙ Advanced display settings. Note: If your computer cannot detect the external monitor, click Detect in the Display window. 2. Select the external monitor and set Resolution. 3. Do the following: – For Windows 7: Click Advanced Settings. – For Windows 10: Click Display adapter properties. 4.
– If the external monitor supports the same resolution as the computer display or a higher resolution, view output on the external monitor or on both the external monitor and the computer display. – If the external monitor supports a lower resolution than the computer display, view output on the external monitor only. (If you view output on both the computer display and the external monitor, the external monitor screen will be blank or distorted.
monitor supports. If it does support the display mode you have set, go to the setup menu for the monitor itself and adjust the settings there. Usually the external monitor has buttons for access to the setup menu. For more information, see the documentation that comes with the monitor. Audio problems • Problem: Wave or MIDI sound does not play properly. Solution: Ensure that the built-in audio device is configured correctly. 1. Go to Control Panel, and ensure that you view Control Panel by Category. 2.
Solution: When the headphones are attached, the streaming is automatically redirected to it. If you want to listen to sound from the speakers again, ensure that you set those speakers as the default device. For more information, see the help information system for Realtek HD Audio Manager. • Problem: Sound does not come from a headphone or a speaker, or the computer cannot record sounds.
• Problem: The operating time for a fully charged battery is short. Solution: Discharge and recharge the battery. If your battery operating time is still short, use a new battery. • Problem: The computer does not operate with a fully charged battery. Solution: The surge protector in the battery might be active. Turn off the computer for one minute to reset the protector; then turn on the computer again. • Problem: The battery cannot get charged. Solution: You cannot charge the battery when it is too hot.
Solution: Turn off the computer by pressing and holding the power button for four seconds or more. If the computer still does not respond, remove the ac power adapter and the battery. Boot problems Print these instructions now and keep them with your computer for reference later. • Problem: I receive an error message before the operating system loads. Solution: Follow the appropriate corrective actions for power-on self-test (POST) error messages.
• Problem: Your computer does not enter sleep or hibernation mode. Solution: Check whether any option has been selected to disable your computer from entering sleep or hibernation mode. If your computer tries to enter sleep mode but the request is rejected, the device attached to the USB connector might have been disabled. If this occurs, do a hot-unplug-and-plug operation for the USB device. • Problem: The battery discharges slightly while the computer is in hibernation mode.
• Problem: The tray does not open even if you press the eject button. Solution: When your computer is not turned on, pressing the eject button does not cause the drive tray to open. Make sure that the computer is turned on and that the drive connector is firmly connected to the computer. If the tray still does not open, make sure that the computer is running, and insert the end of a straightened paper clip into the emergency eject hole. The tray will open.
USB problem Problem: A device connected to the USB connector does not work. Solution: Ensure that the USB port is enabled in the ThinkPad Setup. Open the Device Manager window. Ensure that the USB device setup is correct, and that the assignment of computer resource and the installation of the device driver are correct. To open the Device Manager window, go to Control Panel and ensure that you view Control Panel by Category, and click Hardware and Sound ➙ Device Manager.
94 L570 User Guide
Chapter 8. Recovery information This chapter provides information about recovery solutions. There are various methods to choose from when considering how to recover in the event of a software- or hardware-related problem. Some methods vary depending on the type of your operating system. Recovery information for the Windows 7 operating system This topic introduces the Lenovo recovery solutions on the Windows 7 operating system.
2. Turn on the computer and repeatedly press F12 until the Boot Menu window opens. 3. In the Boot Menu window, select the optical drive (internal or external) as the first boot device. Then, insert the discs into the optical drive and press Enter. The recovery process starts. 4. Follow the instructions on the screen to complete the operation. • If you have created the recovery media with a USB storage device, do the following: 1. Attach the USB storage device to one of the USB connectors on your computer.
http://www.lenovo.com/support Recovery information for the Windows 10 operating system This topic provides information about the Windows recovery solutions on the Windows 10 operating system. Resetting your computer If your computer does not perform well, you might consider resetting your computer. In the resetting process, you can choose to keep your files or remove them, and then reinstall the Windows operating system.
It is recommended that you create a recovery USB drive as early as possible. If you did not create a recovery USB drive as a precautionary measure, you can contact Lenovo Customer Support Center and purchase one from Lenovo. For a list of the Lenovo Support phone numbers for your country or region, go to: http://www.lenovo.com/support/phone Creating a recovery USB drive To create a recovery USB drive, you need a USB drive with at least 16 GB of storage capacity.
Chapter 9. Replacing devices This chapter provides instructions on how to install or replace hardware for your computer. Static electricity prevention Static electricity, although harmless to you, can seriously damage computer components and options. Improper handling of static-sensitive parts can cause damage to the part. When you unpack an option or a Customer Replaceable Unit (CRU), do not open the static-protective package until the instructions direct you to install the part.
DANGER If the rechargeable battery is incorrectly replaced, there is danger of an explosion. The battery contains a small amount of harmful substances. To avoid possible injury: • Replace only with a battery of the type recommended by Lenovo. • Keep the battery away from fire. • Do not expose it to excessive heat. • Do not expose it to water or rain. • Do not short-circuit it. • Do not drop, crush, puncture, or subject to strong forces.
4. Insert a new battery until it clicks into place. 5. Turn the computer over. Connect the ac power adapter and all cables to the computer. Replacing the micro SIM card Before you start, read “Important safety information” on page v and print the following instructions. Micro SIM card is a small plastic card with an Integrated Circuit (IC) chip mounted on one side of the card. To replace the micro SIM card, do the following: 1. Turn off the computer and disconnect it from ac power and all cables. 2.
4. Gently push the micro SIM card to eject it 1 , and then slide it out of the slot 2 . Install a new micro SIM card 3 . Note the orientation of the new card and ensure that it is seated correctly. 5. Reinstall the removable battery. 6. Turn the computer over. Connect the ac power adapter and all cables to the computer. Replacing the bottom cover Before you start, read “Important safety information” on page v and print the following instructions. To replace the bottom cover, do the following: 1.
4. Loosen the screws that secure the bottom cover 1 . Then remove the bottom cover 2 . 5. Install a new bottom cover 1 2 . Ensure that the latches of the bottom cover are secured under the base cover assembly. Then tighten the screws to secure the bottom cover 3 . 6. Reinstall the removable battery. 7. Turn the computer over. Connect the ac power adapter and all cables to the computer.
4. Remove the screw that secures the optical drive. 5. Push the optical drive a little bit out as shown 1 . Then pull the drive completely out of the computer 2 . 6. Insert a new optical drive into the optical-drive bay. Then press the drive firmly into the connector.
7. Reinstall the screw to secure the optical drive. 8. Reinstall the removable battery. 9. Turn the computer over. Connect the ac power adapter and all cables to the computer. Replacing the wireless-WAN card The following information is only for computers with user-installable modules. Before you start, read “Important safety information” on page v and print the following instructions. To replace the wireless-WAN card, do the following: 1.
5. Remove the wireless-WAN card by doing the following: Note: A film might cover the wireless-WAN card. To access the wireless-WAN card, open the film first. a. If a tool is provided with the new wireless-WAN card to help you disconnect cables, use the tool to disconnect the cables from the wireless-WAN card. Otherwise, hold the cable connector with your fingers and gently disconnect each cable from the wireless-WAN card 1 . b. Remove the screw 2 .
6. Install a new wireless-WAN card by doing the following: a. Align the contact edge of the new wireless-WAN card with the key in the slot. Then carefully insert the card into the slot at an angle of about 20 degrees 1 . b. Pivot the wireless-WAN card downward 2 . c. Install the screw to secure the wireless-WAN card in place 3 . d. Connect the cables to the wireless-WAN card 4 . Ensure that you attach the red cable to the main connector and the blue cable to the auxiliary connector on the card. 7.
5. Open the latches on both sides of the memory slot at the same time 1 . Then remove the memory module 2 . 6. Insert the new memory module into the memory slot at an angle of about 20 degrees 1 . Pivot the memory module downward until it snaps into place 2 . If you install only one memory module, install it into the slot a . Ensure that the memory module is firmly installed in the memory slot and cannot be moved easily. 7. Reinstall the bottom cover. 8. Reinstall the removable battery. 9.
Attention: The internal storage drive (such as hard disk drive, solid-state drive, or hybrid drive) is sensitive. Inappropriate handling might cause damage and permanent loss of data. When handling the internal storage drive, observe the following guidelines: • Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for frequent changes or replacement. • Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
To install a new 2.5-inch internal storage drive, do the following: 1. Attach the bracket to the new storage drive. Ensure that the black tape on the bracket faces toward the film on the storage drive. 2. Install the new storage drive with its bracket. Ensure that the new storage drive is seated in place. 3. Reinstall the bottom cover.
4. Reinstall the removable battery. 5. Turn the computer over. Connect the ac power adapter and all cables. M.2 solid-state drive in the internal-storage-drive bay To remove the M.2 solid-state drive in the internal-storage-drive bay, do the following: 1. Turn off the computer and disconnect it from ac power and all cables. 2. Close the computer display and turn the computer over. 3. Remove the removable battery. See “Replacing the removable battery” on page 99. 4. Remove the bottom cover.
7. Slightly lift the M.2 solid-state drive and pull it out of the slot. To install a new M.2 solid-state drive into the internal-storage-drive bay, do the following: 1. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then carefully insert the new drive into the slot at an angle of about 5 degrees 1 . Pivot the new drive downward 2 . 2. Install the protective cover 1 . Then install the screws to secure the cover 2 .
3. Install the M.2 solid-state-drive adapter. 4. Reinstall the bottom cover. 5. Reinstall the removable battery. 6. Turn the computer over. Connect the ac power adapter and all cables. Replacing the keyboard Before you start, read “Important safety information” on page v and print the following instructions. Note: You might be instructed to slide the keyboard frame forward or backward in some of the following steps.
5. Reveal the screw heads beneath the keyboard frame by sliding the keyboard forward by 2.5 mm (0.1 inches).
6. Loosen the screws. 7. Pivot the keyboard slightly upward until you can see the connectors on the bottom side of the keyboard. Then turn the keyboard over. Chapter 9.
8. Put the keyboard on the palm rest and detach the connectors. Then remove the keyboard. To install a new keyboard, do the following: 1. Attach the connectors and turn the keyboard over.
2. Insert the keyboard into the keyboard bezel. Ensure that the front edge of the keyboard (the edge that is close to the display) is under the frame of the keyboard bezel. 3. Ensure that the screw heads are exposed completely. Otherwise, reveal the screw heads by sliding the keyboard frame forward. Chapter 9.
4. Tighten the screws to secure the keyboard in place. 5. Slide the keyboard frame backward by 2.5 mm (0.1 inches). Ensure that you hide the latches of the keyboard frame under the keyboard bezel.
6. Push the keyboard frame backward. Ensure that there is no gap between the keyboard frame and keyboard bezel. 7. Close the plastic latches. 8. Reinstall the removable battery. 9. Turn the computer over. Connect the ac power adapter and all cables. Replacing the coin-cell battery Before you start, read “Important safety information” on page v and print the following instructions. Chapter 9.
DANGER If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The coin-cell battery contains a small amount of harmful substance. To avoid possible injury: • Replace only with a battery of the type recommended by Lenovo. • Keep the battery away from fire. • Do not expose it to excessive heat. • Do not expose it to water or rain. • Do not short-circuit it. • Do not drop, crush, puncture the battery, or make it subject to strong forces.
Chapter 10. Getting support This chapter provides information about getting help and support from Lenovo. Before you contact Lenovo Often, you can solve your computer problems by referring to the information in the explanations of error codes, running diagnostic programs, or by consulting the Lenovo Support Web site. Registering your computer Register your computer with Lenovo. For more information, see “Registering your computer” on page 15.
Microsoft Service Packs are the latest software source for Windows product updates. They are available through Web download (connection charges might apply) or through discs. For more specific information and links, go to https://www.microsoft.com. Lenovo offers technical assistance with installation of, or questions related to, Service Packs for your Lenovo-preinstalled Microsoft Windows product. For more information, contact the Customer Support Center.
Telephone numbers For a list of the Lenovo Support phone numbers for your country or region, go to http://www.lenovo.com/support/phone or refer to the Safety, Warranty, and Setup Guide that comes with your computer. Note: Phone numbers are subject to change without notice. The latest phone numbers are available at http://www.lenovo.com/support/phone. If the number for your country or region is not provided, contact your Lenovo reseller or Lenovo marketing representative.
124 L570 User Guide
Appendix A. Supplemental information about the Ubuntu operating system In limited countries or regions, Lenovo offers customers an option to order computers with the preinstalled Ubuntu® operating system. If the Ubuntu operating system is available on your computer, read the following information before you use the computer. Ignore any information related to Windows-based programs, utilities, and Lenovo preinstalled applications in this documentation.
126 L570 User Guide
Appendix B. Regulatory information This chapter provides regulatory and compliance information about Lenovo products. Certification-related information Product name: ThinkPad L570 Compliance ID: TP00071B Machine types: 20J8, 20J9, 20JQ, and 20JR The latest compliance information is available at: http://www.lenovo.com/compliance Wireless-related information This topic provides wireless-related information about Lenovo products.
• Hands-Free Profile (HFP) • Human Interface Device Profile (HID) • Message Access Profile (MAP) • Object Exchange Protocol (OBEX) • Object Push Profile (OPP) • Personal Area Networking Profile (PAN) • Phone Book Access Profile (PBAP) • Service Discovery Protocol (SDP) • Synchronization Profile (SYNC) • Video Distribution Profile (VDP) • Generic Attribute Profile (GATT) • Proximity Profile • Find Me Profile • Immediate Alert Profile • Battery Status Profile Usage environment and your health This computer c
The following illustration helps you locate the antennas in your computer. 1 Wireless-LAN antenna (main) Wireless-WAN antenna (main, available on some models) 3 Wireless-WAN antenna (auxiliary, available on some models) 4 Wireless-LAN antenna (auxiliary) 2 Wireless-radio compliance information Computer models equipped with wireless communications comply with the radio frequency and safety standards of any country or region in which it has been approved for wireless use.
Export classification notice This product is subject to the United States Export Administration Regulations (EAR) and has an Export Classification Control Number (ECCN) of 5A992.c. It can be re-exported except to any of the embargoed countries in the EAR E1 country list. Electronic emission notices Federal Communications Commission Declaration of Conformity The following information refers to ThinkPad L570, machine types: 20J8, 20J9, 20JQ, and 20JR.
Models without a radio device: This product is in conformity with the protection requirements of EU Council EMC Directive 2014/30/EU on the approximation of the laws of the Member States relating to electromagnetic compatibility.
Japan VCCI Class B compliance statement Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase Japan notice for ac power cord The ac power cord shipped with your product can be used only for this specific product. Do not use the ac power cord for other devices.
Appendix C. WEEE and recycling statements This chapter provides environmental information about Lenovo products. General recycling information Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information about recycling Lenovo products, go to: http://www.lenovo.
Japan recycling statements Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources. Computers and monitors are categorized as industrial waste and should be properly disposed of by an industrial waste disposal contractor certified by a local government.
Equipamentos elétricos e eletrônicos não devem ser descartados em lixo comum, mas enviados à pontos de coleta, autorizados pelo fabricante do produto para que sejam encaminhados e processados por empresas especializadas no manuseio de resíduos industriais, devidamente certificadas pelos orgãos ambientais, de acordo com a legislação local. A Lenovo possui um canal específico para auxiliá-lo no descarte desses produtos.
operator, and follow their instructions. You also can refer to the instructions provided in the user guide for your product. For proper collection and treatment, go to: http://www.lenovo.
Appendix D. Restriction of Hazardous Substances (RoHS) Directive The latest environmental information about Lenovo products is available at: http://www.lenovo.com/ecodeclaration European Union RoHS This Lenovo product, with included parts (cables, cords, and so on) meets the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("RoHS recast" or "RoHS 2").
138 L570 User Guide
Taiwan RoHS Appendix D.
140 L570 User Guide
Appendix E. ENERGY STAR model information ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices. Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation. You might find an ENERGY STAR mark affixed on the computer or displayed on the power settings interface.
5. Clear the Allow this device to wake the computer check box. 6. Click OK.
Appendix F. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux agreement(s) which may accompany software included with this product. Lenovo may update this document at any time without notice. To obtain the most up-to-date documentation for your computer, go to: http://www.lenovo.
Appendix G. Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Access Connections Active Protection System Lenovo Lenovo logo ThinkPad ThinkPad logo TrackPoint UltraConnect Intel and Intel SpeedStep are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Microsoft, Windows, Direct3D, BitLocker, and Cortana are trademarks of the Microsoft group of companies.
146 L570 User Guide
