Operation Manual

Replacing the speaker assembly
Before you start, read Appendix B “Important safety information” on page 103 and print the following
instructions.
To replace the speaker assembly:
1. Disable the built-in battery. See “Disabling the built-in battery” on page 88.
2. Ensure that the computer is turned off and disconnected from ac power and all cables.
3. Close the computer display and turn the computer over.
4. Remove the bottom cover. See “Replacing the bottom cover” on page 88.
5. Detach the connector of the speaker assembly and take the cables out.
Chapter 9. Replacing devices 93