Laptop Hardware Maintenance Manual

The options on the test menu are as follows:
Diagnostics Interactive Tests
v Run Normal Test
v Run Quick Test
v CPU/Coprocessor
v Systemboard
v Video Adapter
v Serial Ports
v Parallel Ports
v Fixed Disks
v Diskette Drives
v Other Devices
v ThinkPad Devices
v Communication
v Wireless LAN
v Memory Test – Full
v Memory Test – Quick
v Keyboard
v Video
v Internal Speaker
v Mouse
v Diskette
v System Load
v CD-ROM/DVD Test
v Intel Wireless Radio
Notes:
v In the Keyboard test in Interactive Tests, the Fn key should
be held down for at least 2 seconds; otherwise, it cannot be
sensed.
v Video Adapter test supports only the LCD display on the
ThinkPad computer. If you have an external monitor attached
to your computer, detach it before running PC-Doctor for DOS.
v When Legacy Floppy Drives is enabled in the BIOS Setup
Utility, the Diskette Drives test is activated even if no legacy
diskette drive is attached to the ThinkPad computer.
4. Run the applicable function test.
5. Follow the instructions on the screen. If there is a
problem, PC-Doctor shows messages describing it.
6. To exit the test, select Quit — Exit Diag.
To cancel the test, press Esc.
Note:
After running PC-Doctor, check the time and date
on the system and reset them if they are incorrect.
Diagnostics
Run Normal Test
Run Quick Test
CPU/Coprocessor
Systemboard
Video Adapter
Serial Ports
Parallel Ports
Fixed Disks
Diskette Drives
Other Devices
Communication
Memory Test - Full
Memory Test - Quick
Interactive Tests Hardware Info Utility Quit F1=Help
PC-DOCTOR 2.0 Copyright 2002 PC-Doctor, Inc. All Rights Reserved.
Use the cursor keys and ESC to move in menus. Press ENTER to select.
Wireless LAN
Checkout guide
40 R50e, R51e and R52 Series