User manual
Table Of Contents
- About this documentation
- Chapter 1. Meet your computer
- Chapter 2. Get started with your computer
- Chapter 3. Explore your computer
- Chapter 4. Accessories
- Chapter 5. Secure your computer and information
- Chapter 6. Configure advanced settings
- Chapter 7. CRU replacement
- Chapter 8. Help and support
- Appendix A. Important safety information
- Appendix B. Accessibility and ergonomic information
- Appendix C. Supplemental information about the Linux operating system
- Appendix D. Compliance information
- Appendix E. Notices and trademarks
6. Install a new M.2 solid-state drive.
a. Install the screw to secure the new M.2 solid-state drive on the bracket.
b. Turn over the new M.2 solid-state drive with the bracket. Insert the new M.2 solid-state drive to the
drive slot. Then, pivot the bracket downward and install the screw to secure the bracket.
7. Reinstall the base cover assembly.
8. Turn over the computer. Connect the ac power adapter and all disconnected cables to the computer.
Coin-cell battery
Prerequisite
Before you start, read Appendix A “Important safety information” on page 67 and print the following
instructions.
Chapter 7. CRU replacement 57