User Guide

ManualsBrandsLenovo ManualsOtherthinkpad t500 w500

ThinkPad T500 and W500

Hard ware Maintenan ce Manual

Summary of content (272 pages)

PAGE 1
ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 2
PAGE 3
ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 4
Note Before using this information and the product it supports, be sure to read the general information under “Notices” on page 261. Fifth Edition (September 2009) © Copyright Lenovo 2008, 2009. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
PAGE 5
Contents About this manual . . . . . . . . . . v Safety information . . . . . . . . . . 1 General safety . . . . . . . . . . . . . . 2 Electrical safety . . . . . . . . . . . . . 3 Safety inspection guide . . . . . . . . . . . 5 Handling devices that are sensitive to electrostatic discharge . . . . . . . . . . . . . . . 6 Grounding requirements . . . . . . . . . . 6 Safety notices (multilingual translations) . . . . . 7 Laser compliance statement (multilingual translations) . . . . . . . . . . . . . .
PAGE 6
Locations . . . . . . . . . . . . . 141 Front view . Rear view . Bottom view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 . 142 . 142 Parts list . . . . . . . . . . . . . 143 Overall . . . . . . . LCD FRUs . . . . . . Keyboard. . . . . . . Miscellaneous parts . . . AC adapters. . . . . . Power cords . . . . . . Recovery discs . . . . . Windows XP Professional iv . . . . . . . (32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . bit) DVDs . . . . . .
PAGE 7
About this manual This manual contains service and reference information for the following ThinkPad® products. ThinkPad T500 MT 2055, 2056, 2081, 2082, 2083, 2087, 2088, 2089, 2241, 2242, 2243, 2246, 2247, and 2261 ThinkPad W500 MT 4058, 4061, 4062, 4063, 4064, and 4065 Use this manual along with the advanced diagnostic tests to troubleshoot problems. Important: This manual is intended only for trained service technicians who are familiar with ThinkPad products.
PAGE 8
vi ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 9
Safety information This chapter presents following safety information that you need to be familiar with before you service a ThinkPad Notebook.
PAGE 10
General safety Follow these rules to ensure general safety: v Observe good housekeeping in the area of the machines during and after maintenance. v When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift. 4. Lift by standing or by pushing up with your leg muscles; this action removes the strain from the muscles in your back.
PAGE 11
Electrical safety Observe the following rules when working on electrical equipment. Important: Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges. Do not use this type of mat to protect yourself from electrical shock.
PAGE 12
v Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage. v Do not service the following parts with the power on when they are removed from their normal operating places in a machine: – Power supply units – Pumps – Blowers and fans – Motor generators – Similar units to listed above This practice ensures correct grounding of the units.
PAGE 13
Safety inspection guide The purpose of this inspection guide is to assist you in identifying potentially unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service technicians from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-ThinkPad features or options not covered by this inspection guide.
PAGE 14
Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD.) ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1.
PAGE 15
Safety notices (multilingual translations) The safety notices in this section are provided in the following languages: v English v Arabic v Brazilian Portuguese v French v German v Hebrew v Japanese v Korean v Spanish v Traditional Chinese Safety information 7
PAGE 16
DANGER Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds. Metallic parts or metal flakes can cause electrical shorts. DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short-circuit it.
PAGE 17
DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. DANGER Though the main batteries have low voltage, a shorted or grounded battery can produce enough current to burn personnel or combustible materials. DANGER Unless hot swap is allowed for the FRU being replaced, do as follows before removing it: power off the computer, unplug all power cords from electrical outlets, remove the battery pack, and disconnect any interconnecting cables.
PAGE 18
10 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 19
Safety information 11
PAGE 20
PERIGO Antes de ligar o computador após a substituição da FRU, certifique-se de que todos os parafusos, molas e outras peças pequenas estejam no lugar e não estejam soltos dentro do computador. Verifique isso sacudindo o computador e procurando ouvir sons de peças soltas. Peças metálicas ou lascas de metal podem causar curto-circuito. PERIGO Algumas baterias reserva contêm uma pequena quantidade de níquel e cádmio.
PAGE 21
PERIGO Para evitar choque elétrico, não remova a capa plástica que protege a parte inferior da placa inversora. PERIGO Embora as principais baterias possuam baixa voltagem, uma bateria em curto-circuito ou aterrada pode produzir corrente o bastante para queimar materiais de pessoal ou inflamáveis.
PAGE 22
DANGER Avant de remettre l’ordinateur sous tension après remplacement d’une unité en clientèle, vérifiez que tous les ressorts, vis et autres pièces sont bien en place et bien fixées. Pour ce faire, secouez l’unité et assurez-vous qu’aucun bruit suspect ne se produit. Des pièces métalliques ou des copeaux de métal pourraient causer un court-circuit. DANGER Certaines batteries de secours contiennent du nickel et du cadmium. Ne les démontez pas, ne les rechargez pas, ne les exposez ni au feu ni à l’eau.
PAGE 23
DANGER Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. DANGER Bien que le voltage des batteries principales soit peu élevé, le court-circuit ou la mise à la masse d’une batterie peut produire suffisamment de courant pour brûler des matériaux combustibles ou causer des brûlures corporelles graves.
PAGE 24
VORSICHT Bevor nach einem FRU-Austausch der Computer wieder angeschlossen wird, muß sichergestellt werden, daß keine Schrauben, Federn oder andere Kleinteile fehlen oder im Gehäuse vergessen wurden. Der Computer muß geschüttelt und auf Klappergeräusche geprüft werden. Metallteile oder-splitter können Kurzschlüsse erzeugen. VORSICHT Die Bereitschaftsbatterie, die sich unter dem Diskettenlaufwerk befindet, kann geringe Mengen Nickel und Cadmium enthalten.
PAGE 25
VORSICHT Die Leuchtstoffröhre im LCD-Bildschirm enthält Quecksilber. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Der LCD-Bildschirm besteht aus Glas und kann zerbrechen, wenn er unsachgemäß behandelt wird oder der Computer auf den Boden fällt.
PAGE 26
18 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 27
Safety information 19
PAGE 28
20 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 29
Safety information 21
PAGE 30
22 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 31
Safety information 23
PAGE 32
PELIGRO Antes de encender el sistema despues de sustituir una FRU, compruebe que todos los tornillos, muelles y demás piezas pequeñas se encuentran en su sitio y no se encuentran sueltas dentro del sistema. Compruébelo agitando el sistema y escuchando los posibles ruidos que provocarían. Las piezas metálicas pueden causar cortocircuitos eléctricos. PELIGRO Algunas baterías de reserva contienen una pequeña cantidad de níquel y cadmio.
PAGE 33
PELIGRO Para evitar descargas, no quite la cubierta de plástico que rodea la parte baja de la tarjeta invertida. PELIGRO Aunque las baterías principales tienen un voltaje bajo, una batería cortocircuitada o con contacto a tierra puede producir la corriente suficiente como para quemar material combustible o provocar quemaduras en el personal.
PAGE 34
26 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 35
Safety information 27
PAGE 36
Laser compliance statement (multilingual translations) The laser compliance statements in this section are provided in the following languages: v English v Arabic v Brazilian Portuguese v French v German v Hebrew v Japanese v Korean v Spanish v Traditional Chinese Some models of ThinkPad Notebook are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options.
PAGE 37
Safety information 29
PAGE 38
Alguns modelos de computador ThinkPad são equipados na fábrica com um dispositivo de armazenamento ótico, como uma unidade de CD-ROM ou de DVD-ROM. Tais dispositivos também são vendidos separadamente como opcionais. Se uma dessas unidades estiver instalada, ela é certificada nos Estados Unidos em conformidade com os requisitos do Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR), Subcapítulo J, para produtos a laser da Classe 1.
PAGE 39
Certains modèles d’ordinateur ThinkPad sont équipés d’origine d’une unité de stockage optique telle qu’une unité de CD-ROM ou de DVD-ROM. Ces unités sont également vendues séparément en tant qu’options. Si l’une de ces unités est installée, elle est certifiée conforme, aux Etats-Unis, aux normes indiquées dans le sous-chapitre J du DHHS 21 CFR relatif aux produits à laser de classe 1.
PAGE 40
Einige ThinkPad-Modelle sind werkseitig mit einem CD-ROM- oder DVD-ROM-Laufwerk ausgestattet. CD- und DVD-Laufwerke können auch gesondert als Zusatzeinrichtung erworben werden. Die Laufwerke erfüllen die Anforderungen gemäß IEC 60825-1 (International Electrotechnical Commission) und gemäß CENELEC EN 60825-1 für Laserprodukte der Klasse 1.
PAGE 41
Safety information 33
PAGE 42
34 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 43
Safety information 35
PAGE 44
Algunos modelos de sistemas ThinkPad están equipados de fábrica con un dispositivo de almacenamiento óptico, como una unidad de CD-ROM o de DVD-ROM. Estas unidades también se venden por separado como opciones. Si está instalada alguna de dichas unidades, se certifica que en los Estados Unidos cumple los requisitos del Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J para productos láser de Clase 1.
PAGE 45
Safety information 37
PAGE 46
38 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 47
Important service information This chapter presents following important service information that applies to all machine types supported by this manual: v “Strategy for replacing FRUs” – “Strategy for replacing a hard disk drive” on page 40 – “Important notice for replacing a system board” on page 40 – “How to use error message” on page 40 v “Strategy for replacing FRUs for CTO, CMV, and GAV” on page 41 – “Product definition” on page 41 – “FRU identification for CTO, CMV, and GAV products” on page 41 Import
PAGE 48
Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: v If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall the original FRU before you continue. v Some computers have both a processor board and a system board. If you are instructed to replace either the processor board or the system board, and replacing one of them does not correct the problem, reinstall that board, and then replace the other one.
PAGE 49
Strategy for replacing FRUs for CTO, CMV, and GAV Product definition Dynamic Configure To Order (CTO) This provides the ability for a customer to configure an IBM® or a Lenovo solution from an eSite, and have this configuration sent to fulfillment, where it is built and shipped directly to the customer. The machine label, Product Entitlement Warehouse (PEW), eSupport, and the HMM will load these products as the 4-digit MT and 3-digit model, where model = “CTO” (Example: 1829-CTO).
PAGE 50
v Business Partners using Eclaim will access PEW when performing Entitlement Lookup. Business Partners will enter Loc ID, MT and Serial, and the key commodities will be returned in the Eclaim record under SYSTEM DETAILS. v Authorized IBM Business Partners can access Eclaim at the following Web site: https://wca.eclaim.
PAGE 51
General checkout This chapter presents following information: v “What to do first” on page 44 v “Checkout guide” on page 45 – “Diagnostics using PC-Doctor for DOS” on page 45 – “Lenovo ThinkVantage Toolbox (Lenovo System Toolbox)” on page 48 – “PC-Doctor for Windows” on page 48 – “PC-Doctor for Rescue and Recovery” on page 49 – “FRU tests” on page 50 v “Power system checkout” on page 52 The descriptions in this chapter apply to any ThinkPad model that supports the PC-Doctor® for DOS diagnostics program.
PAGE 52
What to do first When you do return a FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: __ 1. Name and phone number of service technician __ 2. Date of service __ 3. Date on which the machine failed __ 4. Date of purchase __ 5. Failure symptoms, error codes appearing on the display, and beep symptoms __ 6. Procedure index and page number in which the failing FRU was detected __ 7. Failing FRU name and part number __ 8.
PAGE 53
Checkout guide Use the following procedures as a guide in identifying and correcting problems with the ThinkPad Notebook. Note: The diagnostic tests are intended to test only ThinkPad products. The use of non-ThinkPad products, prototype cards, or modified options can lead to false indications of errors and invalid system responses. 1. Identify the failing symptoms in as much detail as possible. 2. Verify the symptoms.
PAGE 54
Testing the computer Note: The PC-Doctor diagnostic CD does not support any optical drives connected through USB devices or any others. It supports only the internal optical drive of the ThinkPad Notebook. To run the test, do as follows: 1. Turn off the computer. 2. Make sure that the internal optical drive that is supported as a startup device is attached to the computer. 3. Turn on the computer. If the computer cannot be powered on, go to “Power system checkout” on page 52, and check the power sources.
PAGE 55
The options on the test menu are as follows: Diagnostics v v v v v v v v v v v v v v Run Normal Test Run Quick Test CPU/Coprocessor Systemboard Video Adapter Serial Ports Parallel Ports Fixed Disks Diskette Drives Other Devices ThinkPad Devices Communication Wireless LAN Advanced Memory Tests Interactive Tests v v v v v v v v Keyboard Video Internal Speaker Mouse Diskette System Load Optical Drive Test Intel WLAN Radio Test Notes: v In the Keyboard test in Interactive Tests, the Fn key should be held do
PAGE 56
v v v v v v v v DOS Shell Tech Support Form Battery Rundown View Test Log Print Log Save Log Full Erase Hard Drive Quick Erase Hard Drive Lenovo ThinkVantage Toolbox (Lenovo System Toolbox) Lenovo ThinkVantage® Toolbox (Lenovo System Toolbox in Windows Vista® and Windows® XP) is a diagnostic program that works through the Windows operating system.
PAGE 57
v System Reports v Updates and Support PC-Doctor for Rescue and Recovery In some models of ThinkPad Notebook, the Rescue and Recovery® workspace enables you to run the PC-Doctor program to test the hardware features of the computer. To run the test, click “Run Diagnostics” on the Rescue and Recovery main screen.
PAGE 58
FRU tests The following table shows the test for each FRU. Table 1. FRU tests FRU Applicable test System board 1. Diagnostics --> CPU/Coprocessor 2. Diagnostics --> Systemboard 3. If the docking station or the port replicator is attached to the ThinkPad computer, detach it. Place the computer on a horizontal surface, and run Diagnostics --> ThinkPad Devices --> HDD Active Protection Test. Note: Do not apply any physical shock to the computer while the test is running.
PAGE 59
Table 1. FRU tests (continued) FRU Applicable test Optical drive 1. Diagnostics --> Other Devices--> Optical Drive 2. Interactive Tests --> Optical Drive Test Memory 1. If two DIMMs are installed, remove one of them and run Diagnostics --> Advanced Memory Tests. 2. If the problem does not recur, return the DIMM to its place, remove the other one, and run the test again. Fan 1. Turn on the computer and check the air turbulence at the louver near the PC Card slot. 2.
PAGE 60
Power system checkout To 1. 2. 3. 4. 5. 6. 7. verify a symptom, do the following: Turn off the computer. Remove the battery pack. Connect the ac adapter. Check that power is supplied when you turn on the computer. Turn off the computer. Disconnect the ac adapter and install the charged battery pack. Check that the battery pack supplies power when you turn on the computer.
PAGE 61
Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer. Perform operational charging. If the battery status indicator or icon does not turn on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon still does not turn on, replace the battery pack.
PAGE 62
Checking the backup battery Do the following: 1. Power off the computer, and unplug the ac adapter from it. 2. Turn the computer upside down. 3. Remove the battery pack (see “1010 Battery pack” on page 84). 4. Remove the backup battery (see “1100 Backup battery” on page 100). 5. Measure the voltage of the backup battery. See the following figure. Red (+) Black (-) Wire Voltage (V dc) Red +2.5 to +3.2 Black Ground v If the voltage is correct, replace the system board.
PAGE 63
Related service information This chapter presents following information: v “Restoring the factory contents by using Product Recovery discs” v “Restoring the factory contents by using Recovery Disc Set” on page 56 v “Passwords” on page 57 v “Power management” on page 60 v “Symptom-to-FRU index” on page 62 Service Web site: When the latest maintenance diskette and the system program service diskette become available, they will be posted on http://www.lenovo.
PAGE 64
8. When the recovery process is complete, the Welcome to Microsoft Windows screen is displayed. Follow the instructions on the screen to complete the Windows setup. Restoring the factory contents by using Recovery Disc Set When the hard disk drive (HDD) or solid state drive (SSD) is replaced because of a failure, no product recovery program is on the new drive. In this case, you must use the Recovery Disc Set for the computer.
PAGE 65
5. Read the license. If you agree with the terms and conditions, select I accept these terms and conditions and then click Next. If you do not agree with the terms and conditions, follow the instructions on the screen. 6. Click Yes in the displayed window to begin the operating system recovery process. 7. Insert the Applications and Drivers Recovery Disc when prompted and then click OK to begin the applications and drivers recovery process. 8.
PAGE 66
Note: There are two modes for the HDP: User only and Master + User. The Master + User mode requires two HDPs; the system administrator enters both in the same operation. The system administrator then provides the user HDP to the system user. Attention: If the user HDP has been forgotten, check whether a master HDP has been set. If it has, it can be used for access to the hard disk drive.
PAGE 67
5. Select Power-On Password. 6. Type the current SVP in the Enter Current Password field. then leave the Enter New Password field blank, and press Enter twice. 7. In the Changes have been saved window, press Enter. 8. Press F10; then, in the Setup confirmation window, select Yes.
PAGE 68
Power management To reduce power consumption, the computer has three power management modes: screen blank, sleep (standby in Windows XP), and hibernation. Screen blank mode If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. To put the computer into screen blank mode, do as follows: 1. Press Fn+F3. A panel for selecting a power plan (in Windows XP, power scheme) appears. 2.
PAGE 69
Also, in either of the following events, the computer automatically returns from sleep (standby) mode and resumes operation: v The ring indicator (RI) is signaled by a serial device or a PC Card device. v The time set on the resume timer elapses. Note: The computer does not accept any input immediately after it enters sleep (standby) mode. Wait a few seconds before taking any action to reenter operation mode.
PAGE 70
Symptom-to-FRU index This section contains following information: v “Numeric error codes” v “Error messages” on page 66 v “Beep symptoms” on page 67 v “No-beep symptoms” on page 67 v “LCD-related symptoms” on page 68 v “Intermittent problems” on page 69 v “Undetermined problems” on page 69 The symptom-to-FRU index in this section lists symptoms and errors and their possible causes. The most likely cause is listed first, in boldface type.
PAGE 71
Table 2. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0187 EAIA data access error—The access to EEPROM is failed. System board. 0188 Invalid RFID Serialization Information Area. System board. 0189 System board. Invalid RFID configuration information area—The EEPROM checksum is not correct. 0190 Critical low-battery error 1. Charge the battery pack. 2. Battery pack. 0191 System Security—Invalid Remote Change requested. 1.
PAGE 72
Table 2. Numeric error codes (continued) 64 Symptom or error FRU or action, in sequence 0250 System battery error—System battery is dead. 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 0251 System CMOS checksum bad— Default configuration used. 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2.
PAGE 73
Table 2. Numeric error codes (continued) Symptom or error FRU or action, in sequence 1804 Unauthorized WAN card is plugged in—Power off and remove the WAN card. 1. Remove the WAN card that you installed. 2. System board. 1820 More than one external fingerprint reader is attached. Power off and remove all but the reader that you set up within your main operating system. Remove all but the reader that you set up for the authentication.
PAGE 74
Error messages Table 3. Error messages Symptom or error FRU or action, in sequence Device address conflict. 1. Load “Setup Defaults” in the BIOS Setup Utility. 2. Backup battery. 3. System board. Allocation error for device. 1. Load “Setup Defaults” in the BIOS Setup Utility. 2. Backup battery. 3. System board. Failing bits: nnnn. 1. DIMM. 2. System board. Invalid system configuration data. 1. DIMM. 2. System board. I/O device IRQ conflict. 1. Load “Setup Defaults” in the BIOS Setup Utility. 2.
PAGE 75
Beep symptoms Table 4. Beep symptoms Symptom or error FRU or action, in sequence One beep and a blank, unreadable, or flashing LCD. 1. 2. 3. 4. One long and two short beeps, and a blank or unreadable LCD. 1. System board. 2. LCD assembly. 3. DIMM. Two short beeps with error codes. POST error. See “Numeric error codes” on page 62. Two short beeps and a blank screen. 1. System board. 2. DIMM. Three short beeps, pause, three more short beeps, and one short beep. 1. DIMM. 2.
PAGE 76
LCD-related symptoms Important: The TFT LCD for the notebook computer contains many thin-film transistors (TFTs). The presence of a small number of dots that are missing, discolored, or always lighted is characteristic of TFT LCD technology, but excessive pixel problems can cause viewing concerns. If the LCD you are servicing has two or less visible defective pixels, it should not be considered faulty.
PAGE 77
Intermittent problems Intermittent system hang problems can be due to a variety of causes that have nothing to do with a hardware defect, such as cosmic radiation, electrostatic discharge, or software errors. FRU replacement should be considered only when a problem recurs. When analyzing an intermittent problem, do the following: 1. Run the diagnostic test for the system board in loop mode at least 10 times. 2. If no error is detected, do not replace any FRUs. 3.
PAGE 78
70 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 79
Status indicators This chapter presents the system status indicators that show the status of the computer.
PAGE 80
Table 7. Status indicators Indicator Meaning 1 Wireless status Green: The wireless feature (802.11 standard or 802.11n) is on, and the radio link is ready for use. Blinking green: Data is being transmitted. 2 Wireless PAN status Green: Bluetooth wireless is operational. This indicator is on when Bluetooth wireless is on and not in suspend mode. R 72 3 Wireless WAN status Green: The wireless WAN is on, and the radio link is ready for use. Blinking green: Data is being transmitted.
PAGE 81
Table 7. Status indicators (continued) Indicator Meaning 11 Green: A Serial Ultrabay Slim device is installed and in use. Blinking green: A Serial Ultrabay Slim device is in the process of being detached. Turn off: A Serial Ultrabay Slim device is ready to be attached or detached. Note: If you are using Windows 2000, the Serial Ultrabay Slim status indicator does not blink while a Serial Ultrabay Slim device is being detached.
PAGE 82
74 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 83
Fn key combinations The following table shows the function of each combination of Fn with a function key. Table 8. Fn key combinations Key combination Description Fn+F1 Reserved. Fn+F2 Lock the computer. Fn+F3 Select a power plan (in Windows XP, power scheme) that has been created by Power Manager, or adjust the power level by using the slider control. When you press this combination, a panel for selecting a power plan (power scheme) appears. Notes: 1.
PAGE 84
Table 8. Fn key combinations (continued) Key combination Description Fn+F7 Apply a presentation scheme directly, with no need to start Presentation Director. To disable this function and use the Fn+F7 key combination for switching a display output location, start Presentation Director, and change the settings. Note: If the computer is a windows 7 model, it does not support presentation schemes, but the Fn+F7 combination is available for switching a display output location.
PAGE 85
Table 8. Fn key combinations (continued) Key combination Description Fn+F10 Reserved. Fn+F11 Reserved. Fn+F12 Put the computer into hibernation mode. To return to normal operation, press the power button for less than four seconds. Note: To use Fn+F12 for hibernation, you must have the ThinkPad PM device driver installed on the computer. Fn+PgUp Turn the ThinkLight® on or off. Note: This function is supported only on the ThinkPad computers that have the ThinkLight.
PAGE 86
78 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 87
FRU replacement notices This chapter presents notices related to removing and replacing parts. Read this chapter carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the ThinkPad Notebook, this problem is addressed with special nylon-coated screws that have the following characteristics: v They maintain tight connections. v They do not easily come loose, even with shock or vibration. v They are harder to tighten. v Each one should be used only once.
PAGE 88
Retaining serial numbers This section includes the following descriptions: v “Restoring the serial number of the system unit” v “Retaining the UUID” v “Reading or writing the ECA information” on page 81 Restoring the serial number of the system unit When the computer was manufactured, the EEPROM on the system board was loaded with the serial numbers of the system and all major components. These numbers need to remain the same throughout the life of the computer.
PAGE 89
The algorithm that generates the number is designed to provide unique IDs until the year A.D. 3400. No two computers in the world have the same number. When you replace the system board, you must set the UUID on the new system board as follows: 1. Install the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or later, and restart the computer. 2. From the main menu, select 4. Assign UUID. A new UUID is created and written. If a valid UUID already exists, it is not overwritten.
PAGE 90
82 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 91
Removing and replacing a FRU This chapter presents directions and drawings for use in removing and replacing a FRU. Be sure to observe the following general rules: 1. Do not try to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 79. 3. Begin by removing any FRUs that have to be removed before the failing FRU. Any such FRUs are listed at the top of the page.
PAGE 92
1010 Battery pack Important notice for replacing a battery pack: ThinkVantage Toolbox (in Windows 7) and Lenovo System Toolbox (in Windows Vista and Windows XP) have an automatic battery diagnostic that determines if the battery pack is defective. A battery pack FRU should not be replaced unless this diagnostic shows that the battery is defective. The only exception to this is if the battery pack is physically damaged or a customer is reporting a possible safety issue.
PAGE 93
1020 Serial Ultrabay Slim device Note: Serial Ultrabay Slim does not accept any of the following devices: v Ultrabay Plus™ devices v Ultrabay 2000™ devices v Ultrabay Enhanced devices v Ultrabay Slim devices v Ultrabay devices Table 10. Removal steps of Serial Ultrabay Slim device When you release the switch in step 1 , the lever pops out. In step 2 , pull the lever a little to release the device from the bay.
PAGE 94
1030 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter For access, remove this FRU: v “1010 Battery pack” on page 84 Attention: v Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. v Before removing the drive, have the user make a backup copy of all the information on it if possible.
PAGE 95
Table 11. Removal steps of HDD cover, HDD and HDD rubber rails or SSD and storage converter (continued) HDD and HDD rubber rails: 5 5 When installing: The rubber rails on the hard disk drive must be attached to the replacement drive. Otherwise the drive cannot be installed properly.
PAGE 96
1040 Palm rest or palm rest with fingerprint reader For access, remove this FRU in order: v “1010 Battery pack” on page 84 Note: In models with the fingerprint reader, the sensor is attached to the palm rest FRU. If the fingerprint reader has any defects, you can replace it by the procedures given in this section, which are the same for a palm rest with or without a fingerprint reader. Table 12.
PAGE 97
Table 12. Removal steps of palm rest (continued) 3 When installing: When you attach the palm rest, do as follows: Table 13. Installation of the palm rest 1. Attach the fingerprint reader connector firmly to the system board. 2. Attach the palm rest so that the two projections of the palm rest ( a ) firmly fit into the guide holes of the keyboard bezel as shown in this figure.
PAGE 98
Table 13. Installation of the palm rest (continued) 3. Push the front side of the palm rest until it clicks into place. 4. Close the LCD cover and turn the computer over. Then fasten the four screws to secure the palm rest.
PAGE 99
1050 DIMM For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 Table 14. Removal steps of DIMM Note: If only one DIMM is used on the computer you are servicing, the card must be installed in SLOT-0 ( a : lower slot), but not in SLOT-1 ( b : upper slot). 1 b 2 a 1 When installing: Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it snaps into the place.
PAGE 100
1060 Keyboard For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 Table 15. Removal steps of keyboard 1 Step 1 Icon Screw (quantity) Color Torque M2 × 14 mm, wafer-head, nylon-coated (1) Black 0.189 Nm (1.85 kgfcm) Lift the keyboard a little in the direction shown by arrow 2 , and then detach the connector 3 .
PAGE 101
Table 15. Removal steps of keyboard (continued) When installing: Make sure that the keyboard edges a are under the frame as shown in this figure.
PAGE 102
1070 Modem daughter card (MDC-3.0) For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 Table 16. Removal steps of MDC-3.0 1 1 2 1 3 Step Screw (quantity) Color Torque 1 M2 × 3 mm, small-head, nylon-coated (3) Silver 0.189 Nm (1.85 kgfcm) In step 3 , remove the card by pulling the tab with your fingers in the direction shown by the arrow.
PAGE 103
Table 16. Removal steps of MDC-3.0 (continued) Turn the card over 4 , and detach the modem connector 5 . 4 5 When installing: Make sure that the modem connector and the connector on the underside of the card are attached firmly.
PAGE 104
1080 PCI Express Mini Card for wireless LAN/WiMAX For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 Table 17. Removal steps of PCI Express Mini Card for wireless LAN/WiMAX In step 1 , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in direction of the arrow.
PAGE 105
Table 17. Removal steps of PCI Express Mini Card for wireless LAN/WiMAX (continued) 3 When installing: v In models with wireless LAN card that has two antenna connectors, plug the gray cable into the jack labeled MAIN or M, and the black cable into the jack labeled AUX or A on the card. If the computer you are servicing has three cables, put the white cable in the cable holder and place it under the card.
PAGE 106
1090 Intel Turbo Memory Minicard or Wireless USB adapter For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 Table 18. Removal steps of Intel Turbo Memory Minicard or Wireless USB adapter Note: Step 1 is only for the models with the Wireless USB adapter. For the models with the Intel® Turbo Memory Minicard, skip step 1 .
PAGE 107
Table 18. Removal steps of Intel Turbo Memory Minicard or Wireless USB adapter (continued) 2 3 Step Screw (quantity) 2 For Japan M2 × 3 mm, tamper proof (2) Color Torque Black 0.189 Nm (1.85 kgfcm) Silver 0.189 Nm (1.
PAGE 108
1100 Backup battery DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 Table 19. Removal steps of backup battery 1 2 When installing: Make sure that the battery connector is attached firmly.
PAGE 109
1110 SIM card slot For access, remove these FRUs, in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 Note: If the SIM card has been inserted in the slot, remove it before you start the servicing. After you finish the servicing, make sure that you insert the card back into the slot firmly. Table 20. Removal steps of SIM card slot 1 2 Step Screw (quantity) Color 1 M2 × 3.
PAGE 110
1120 Keyboard bezel For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 Table 21. Removal steps of keyboard bezel 1 102 1 Step Screw (quantity) Color Torque 1 M2 × 14 mm, wafer-head, nylon-coated (2) Black 0.189 Nm (1.
PAGE 111
Table 21. Removal steps of keyboard bezel (continued) 3 4 3 2 4 3 3 In step 2 , release the wireless antenna cables from the cable guide. Step Screw (quantity) Color Torque 3 M2 × 3 mm, small-head, nylon-coated (4) Silver 0.189 Nm (1.85 kgfcm) 4 M2 × 3.5 mm, wafer-head, nylon-coated (2) Black 0.189 Nm (1.85 kgfcm) In step 5 , detach the claws. Then remove the keyboard bezel in the direction shown by arrow 6 .
PAGE 112
1130 PCI Express Mini Card for wireless WAN For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 v “1120 Keyboard bezel” on page 102 Table 22. Removal steps of PCI Express Mini Card for wireless WAN In step 1 , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in direction of the arrow.
PAGE 113
Table 22. Removal steps of PCI Express Mini Card for wireless WAN (continued) 3 Table 23. Installation of the PCI Express Mini Card for wireless WAN Cable routing: When you install the card, route the antenna cables as shown in this figure. If the computer you are servicing is the wireless WAN-ready model, put the cables in the cable holders and secure them with tape as shown in this figure.
PAGE 114
0 Speaker assembly For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 v “1120 Keyboard bezel” on page 102 Table 24. Removal steps of speaker assembly The speaker cables are secured with tapes ( a ). 1 1 a 1 1 a Step Screw (quantity) Color Torque 1 M2 × 3 mm, small-head, nylon-coated (4) Silver 0.189 Nm (1.
PAGE 115
Table 24. Removal steps of speaker assembly (continued) Cable routing: Make sure that the speaker connector is attached firmly, and the cables are routed as in this figure.
PAGE 116
1150 Fan assembly For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 v “1120 Keyboard bezel” on page 102 v “1140 Speaker assembly” on page 106 Table 25. Removal steps of fan assembly 2 3 2 1 3 1 Step Screw (quantity) Color Torque 1 M2 × 3 mm, small-head, nylon-coated (2) Silver 0.189 Nm (1.85 kgfcm) 2 M2 × 9.5 mm, wafer-head, nylon-coated (2) Black 0.189 Nm (1.
PAGE 117
Table 25. Removal steps of fan assembly (continued) 5 5 4 4 Step Screw (quantity) Color 4 M2 × 9.5 mm, wafer-head, nylon-coated (2) Silver Torque 0.189 Nm (1.85 kgfcm) In step 5 , release the wireless antenna cables from the cable guide of the fan assembly.
PAGE 118
Table 26. Installation of the fan assembly When installing: v Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked a as in the following figure. Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component. In some modes, you need to peel the thin film off from the rubber b .
PAGE 119
Table 26. Installation of the fan assembly (continued) v When attaching the fan assembly to the frame, take care not to damage the heat sink and the cable guides ( b ) of the fan assembly.
PAGE 120
1160 CPU For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 v “1120 Keyboard bezel” on page 102 v “1140 Speaker assembly” on page 106 v “1150 Fan assembly” on page 108 Attention: CPU is extremely sensitive. When you service the CPU, avoid any kind of rough handling. Table 27.
PAGE 121
1170 LCD unit For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 v “1080 PCI Express Mini Card for wireless LAN/WiMAX” on page 96 v “1120 Keyboard bezel” on page 102 v “1130 PCI Express Mini Card for wireless WAN” on page 104 Table 28. Removal steps of LCD assembly 1 1 Step Screw (quantity) Color Torque 1 M2.5 × 6.5 mm, wafer-head, nylon-coated (2) Black 0.
PAGE 122
Table 28. Removal steps of LCD assembly (continued) 3 2 3 114 Step Screw (quantity) Color Torque 3 M2.5 × 6.5 mm, wafer-head, nylon-coated (2) Black 0.
PAGE 123
Table 28. Removal steps of LCD assembly (continued) 4 4 When installing: 1. Route the antenna cables along the cable guides and secure them with the tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. 2. Make sure that the LCD connector is attached firmly.
PAGE 124
1180 Base cover and USB sub card with cable For access, remove these FRUs, in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 v “1080 PCI Express Mini Card for wireless LAN/WiMAX” on page 96 v “1120 Keyboard bezel” on page 102 v “1130 PCI Express Mini Card for wireless WAN” on page 104 v “1170 LCD unit” on page 113 Table 29.
PAGE 125
Table 29. Removal steps of base cover and USB sub card with cable (continued) 3 4 4 Step Screw (quantity) Color 3 M2 × 9.5 mm, wafer-head, nylon-coated (1) Black 0.189 Nm (1.85 kgfcm) 4 M2 × 14 mm, wafer-head, nylon-coated (2) 0.189 Nm (1.
PAGE 126
Table 29. Removal steps of base cover and USB sub card with cable (continued) 6 6 6 5 Step Screw (quantity) Color Torque 5 M2 × 3 mm, small-head, nylon-coated (1) Silver 0.189 Nm (1.85 kgfcm) When installing: Make sure that the connectors are attached firmly.
PAGE 127
Table 29. Removal steps of base cover and USB sub card with cable (continued) Attention: Before step 7 , be sure that the Serial Ultrabay Slim device eject lever has not popped out. It must be housed in its position as shown in the figure a . 7 8 a Remove the USB sub card with cable as shown in this figure. 1 1 2 Step Screw (quantity) Color 1 M2 × 3.5 mm, wafer-head, nylon-coated (2) Black Torque 0.189 Nm (1.
PAGE 128
Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels: 1 Product label 1a Non-mercury label Note: If the computer you are servicing is an LED-backlight LCD model, you need to paste this label so that the notice for mercury on the product label is covered.
PAGE 129
1190 Structure frame For access, remove these FRUs, in order: v “1010 Battery pack” on page 84 v “1020 Serial Ultrabay Slim device” on page 85 v “1030 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter” on page 86 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 v “1070 Modem daughter card (MDC-3.
PAGE 130
Table 30. Removal steps of structure frame (continued) Remove the AC power jack cable a . 3 a 2 When installing: Make sure the connector is attached firmly, and that the cable is routed as in the figure above. Remove the CPU support plate. 4 122 5 Step Screw (quantity) Color Torque 4 M2 × 5 mm, wafer-head, nylon-coated (1) Black 0.189 Nm (1.
PAGE 131
Table 30. Removal steps of structure frame (continued) 7 6 6 6 8 6 a 9 9 Step Screw (quantity) Color 6 M2 × 3.5 mm, wafer-head, nylon-coated (4) Black 0.189 Nm (1.85 kgfcm) 7 M2 × 9.5 mm, wafer-head, nylon-coated (1) Black 0.189 Nm (1.85 kgfcm) 8 M2 × 3 mm, small-head, nylon-coated (1) 0.189 Nm (1.85 kgfcm) Silver Torque In step 9 , loosen the hex screws. When installing: When attaching the system board to the frame, adjust the placement with the small projection a .
PAGE 132
1200 System board and ExpressCard slot assembly Important notices for handling the system board: When handling the system board, bear the following in mind. v The system board has an accelerometer, which can be broken by applying several thousands of G-forces. Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench can subject the accelerometer to as much as 6,000 G’s of shock.
PAGE 133
For access, remove these FRUs, in order: v “1010 Battery pack” on page 84 v “1020 Serial Ultrabay Slim device” on page 85 v “1030 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter” on page 86 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1050 DIMM” on page 91 v “1060 Keyboard” on page 92 v “1070 Modem daughter card (MDC-3.
PAGE 134
Table 31. Removal steps of system board and ExpressCard slot assembly 1 1 Step Screw (quantity) Color 1 M2 × 2.7 mm, wafer-head, nylon-coated (2) Black Torque 0.189 Nm (1.85 kgfcm) Turn the system board over, and then disconnect the ExpressCard slot assembly a from the system board. a 2 When installing: Make sure that the connector of the Express Card slot assembly is attached to the system board firmly.
PAGE 135
2010 LCD front bezel (LCD cover kit) For access, remove this FRU: v “1010 Battery pack” on page 84 Table 32. Removal steps of LCD front bezel 2 1 2 1 1 1 Step Screw cap Screw (quantity) Color Torque 1 M2.5 × 6.5 mm, bind-head, nylon-coated (3) Black 0.392 Nm (4 kgfcm) 2 M2.5 × 6.5 mm, bind-head, nylon-coated (2) Black 0.
PAGE 136
Table 32. Removal steps of LCD front bezel (continued) Close the LCD cover. Detach the LCD rear cover a little as shown in step 3 of this figure, and detach the rear edge of the LCD rear cover 4 .
PAGE 137
2020 LCD rear cover (LCD cover kit) For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “2010 LCD front bezel (LCD cover kit)” on page 127 Table 33.
PAGE 138
2030 Inverter card or LED control card For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “2010 LCD front bezel (LCD cover kit)” on page 127 Table 34. Removal steps of inverter card or LED control card 1 2 1 3 4 Step Screw (quantity) Color 1 M2 × 2.8 mm, wafer-head, nylon-coated (2) Silver Torque 0.189 Nm (1.
PAGE 139
2040 Integrated camera For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “2010 LCD front bezel (LCD cover kit)” on page 127 Table 35. Removal steps of integrated camera 2 1 2 Step Screw (quantity) Color 1 M2 × 3.5 mm, wafer-head, nylon-coated (2) Black Torque 0.189 Nm (1.
PAGE 140
2050 Bluetooth daughter card (BDC-2.1) For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “2010 LCD front bezel (LCD cover kit)” on page 127 Table 36. Removal steps of BDC-2.1 1 2 Step Screw (quantity) Color 1 M2 × 2.8 mm, wafer-head, nylon-coated (1) Silver When installing: Make sure that connector is attached firmly. 132 ThinkPad T500 and W500 Hardware Maintenance Manual Torque 0.189 Nm (1.
PAGE 141
2060 Antenna assembly For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 v “1120 Keyboard bezel” on page 102 v “1130 PCI Express Mini Card for wireless WAN” on page 104 v “1170 LCD unit” on page 113 v “2010 LCD front bezel (LCD cover kit)” on page 127 v “2020 LCD rear cover (LCD cover kit)” on page 129 Table 37.
PAGE 142
Table 37.
PAGE 143
Table 37.
PAGE 144
2070 LCD panel and LCD cable For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 v “1080 PCI Express Mini Card for wireless LAN/WiMAX” on page 96 v “1120 Keyboard bezel” on page 102 v “1130 PCI Express Mini Card for wireless WAN” on page 104 v “1170 LCD unit” on page 113 v “2010 LCD front bezel (LCD cover kit)” on page 127 v “2020 LCD rear cover (LCD cover kit)” on page 129 v “2030 Inverter c
PAGE 145
Table 38. Removal steps of LCD panel and LCD cable (continued) 5 4 8 7 6 9 6 6 6 6 7 Step Screw (quantity) Color Torque 6 M2 × 2.8 mm, small-head, nylon-coated (5) Silver 0.189 Nm (1.
PAGE 146
Table 38. Removal steps of LCD panel and LCD cable (continued) 8 b 9 When installing: Make sure that the LCD cable is attached firmly.
PAGE 147
2080 Hinges and LCD magnesium frame For access, remove these FRUs in order: v “1010 Battery pack” on page 84 v “1040 Palm rest or palm rest with fingerprint reader” on page 88 v “1060 Keyboard” on page 92 v “1080 PCI Express Mini Card for wireless LAN/WiMAX” on page 96 v “1120 Keyboard bezel” on page 102 v “1130 PCI Express Mini Card for wireless WAN” on page 104 v “1170 LCD unit” on page 113 v “2010 LCD front bezel (LCD cover kit)” on page 127 v “2020 LCD rear cover (LCD cover kit)” on page 129 v “2030 Inv
PAGE 148
140 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 149
Locations This chapter presents the location of ThinkPad T500 and W500 features and hardware. Front view 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ThinkLight Integrated camera (for some models) Status indicators Note: For the description of each indicator, see “Status indicators” on page 71.
PAGE 150
Rear view 1 2 3 4 5 6 7 8 9 Status indicators Note: For the description of each indicator, see “Status indicators” on page 71.
PAGE 151
Parts list This chapter contains following lists of the service parts. v “Overall” on page 144 v “LCD FRUs” on page 219 v “Keyboard” on page 237 v “Miscellaneous parts” on page 239 v “AC adapters” on page 241 v “Power cords” on page 242 v “Recovery discs” on page 243 v “Common service tools” on page 259 Notes: v Each FRU is available for all types or models, unless specific types or models are specified.
PAGE 152
Overall 1 27 26 2 25 a b 3 4 d 24 c 23 22 e 5 6 7 21 8 9 10 20 19 11 f 12 13 14 15 18 16 17 144 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 153
Table 40. Parts list—Overall No. a-d FRU FRU no. CRU ID See “Miscellaneous parts” on page 239. 1 LCD unit (see “LCD FRUs” on page 219.) 2 Keyboard bezel assembly 45N5499 N 3 SIM card slot 42X3919 N 4 Speaker assembly 42W3803 N 4 Speaker assembly 39T7492 N 5 Modem daughter card (MDC-3.
PAGE 154
Table 40. Parts list—Overall (continued) No. 6 146 FRU FRU no.
PAGE 155
Table 40. Parts list—Overall (continued) No. 6 FRU FRU no.
PAGE 156
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 157
Table 40. Parts list—Overall (continued) No. 6 6 FRU FRU no.
PAGE 158
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 159
Table 40. Parts list—Overall (continued) No. FRU no. CRU ID US 43Y6501 ** Japan 43Y6503 ** 8 Structure frame 45N3831 N 9 Backup battery 02K6572 ** 10 Hard disk drive rubber rails 41V9756 * 11 SATA hard disk drive, 80 GB, 9.
PAGE 160
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 SATA hard disk drive, 80 GB, 9.5 mm, 5,400 rpm OP v 2055-CTO, 2Bx, 74x v 2056-CTO, 4Px, 79x v 2081-CTO v 2082-CTO v 2083-CTO, 4Yx v 2087-CTO, 4Zx v 2088-CTO v 2089-CTO, 2Jx, 59x v 2241-CTO, 3Wx, 5Sx, v 2242-CTO v 2243-CTO v 2246-CTO, 4Bx v 2247-CTO, 4Cx v 2261-CTO v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO 42T1491 ** 11 SATA hard disk drive, 80 GB, 9.
PAGE 161
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 SATA hard disk drive, 80 GB, 9.5 mm, 5,400 rpm v 2055-CTO, 2Bx, 74x v 2056-CTO, 4Px, 79x v 2081-CTO v 2082-CTO v 2083-CTO, 4Yx v 2087-CTO, 4Zx v 2088-CTO v 2089-CTO, 2Jx, 59x v 2241-CTO, 3Wx, 5Sx, v 2242-CTO v 2243-CTO v 2246-CTO, 4Bx v 2247-CTO, 4Cx v 2261-CTO v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO 42T1575 ** 11 39T2899 SATA hard disk drive, 160 GB, 9.
PAGE 162
Table 40. Parts list—Overall (continued) No. 11 154 FRU FRU no. 42T1501 SATA hard disk drive, 160 GB, 9.
PAGE 163
Table 40. Parts list—Overall (continued) No. 11 FRU FRU no. 42T1309 SATA hard disk drive, 160 GB, 9.
PAGE 164
Table 40. Parts list—Overall (continued) No. 11 156 FRU FRU no. 42T1579 SATA hard disk drive, 160 GB, 9.
PAGE 165
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 42T1471 SATA hard disk drive, 250 GB, 9.
PAGE 166
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 42T1517 SATA hard disk drive, 250 GB, 9.
PAGE 167
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 SATA hard disk drive, 320 GB, 9.
PAGE 168
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 SATA hard disk drive, 320 GB, 9.
PAGE 169
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 SATA hard disk drive, 500 GB, 9.5 mm, 5,400 rpm v 2055-CTO, A7x, A8x, A9x, APx, AUx v 2056-CTO v 2081-CTO v 2082-CTO, ADx, AGx, BDx, BGx v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO, 4Vx, 64x v 4062-CTO, 4Tx v 4063-CTO v 4064-CTO v 4065-CTO 45N7211 ** 11 SATA hard disk drive, 500 GB, 9.
PAGE 170
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 SATA hard disk drive, 100 GB, 9.5 mm, 7,200 rpm OP v 2055-CTO, 2Nx v 2056-CTO v 2081-CTO v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO, 2Ux v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO 42T1485 ** 11 SATA hard disk drive, 100 GB, 9.
PAGE 171
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 SATA hard disk drive, 160 GB, 9.
PAGE 172
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 SATA hard disk drive, 160 GB, 9.
PAGE 173
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 SATA hard disk drive, 200 GB, 9.5 mm, 7,200 rpm, FDE v 2055-CTO, 2Xx v 2056-CTO v 2081-CTO, 22x, 24x, 3Ex, 53x v 2082-CTO, 28x, 3Rx, 5Yx v 2083-CTO v 2087-CTO v 2088-CTO, 3Tx, 3Wx v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO, 23x v 4061-CTO, 2Kx v 4062-CTO, 25x, 26x, 28x, 2Gx, 37x, 3Bx, 3Cx, 3Jx, 3Kx, 4Dx, 4Ex v 4063-CTO v 4064-CTO v 4065-CTO 42T1561 ** 11 SATA hard disk drive, 250 GB, 9.
PAGE 174
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 SATA hard disk drive, 250 GB, 9.5 mm, 7,200 rpm, FDE v 2055-CTO, 8Jx, 9Sx, 9Tx v 2056-CTO v 2081-CTO, 7Tx v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO, 3Xx, 44x, 4Rx, 53x v 4062-CTO, 4Jx, 5Cx, 5Gx v 4063-CTO v 4064-CTO v 4065-CTO 42T1573 ** 11 SATA hard disk drive, 250 GB, 9.
PAGE 175
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 SATA hard disk drive, 320 GB, 9.
PAGE 176
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 11 SATA hard disk drive, 320 GB, 9.
PAGE 177
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 12 SATA hard disk drive, 500 GB, 9.5 mm, 7,200 rpm v 2055-CTO, ANx, AQx, ARx, ASx, ATx v 2056-CTO v 2081-CTO v 2082-CTO, BEx, BHx v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO, 65x, 66x, 67x, 68x, 69x v 4062-CTO, 57x, 5Mx, 5Px v 4063-CTO v 4064-CTO v 4065-CTO 45N7257 ** 12 1.8-inch - 2.
PAGE 178
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 179
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 180
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 181
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 182
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 183
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 184
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 14 Battery pack, Li-ion (6 cell, 2.4 Ah) v 2055-CTO v 2056-CTO v 2081-CTO v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO 42T4670 * 14 Battery pack, Li-ion (6 cell, 2.
PAGE 185
Table 40. Parts list—Overall (continued) No. 14 FRU FRU no. CRU ID Battery pack, Li-ion (6 cell, 2.
PAGE 186
Table 40. Parts list—Overall (continued) No. 14 178 FRU FRU no. 42T4621 Battery pack, Li-ion (6 cell, 2.
PAGE 187
Table 40. Parts list—Overall (continued) No. 14 FRU FRU no. 42T4622 Battery pack, Li-ion (6 cell, 2.
PAGE 188
Table 40. Parts list—Overall (continued) No. 14 180 FRU FRU no. 42T4777 Battery pack, Li-ion (6 cell, 2.
PAGE 189
Table 40. Parts list—Overall (continued) No. 14 FRU FRU no.
PAGE 190
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 191
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 16 DVD drive, 9.5 mm v 2055-CTO v 2056-CTO v 2081-CTO v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO 42T2541 N 16 DVD/CD-RW combo drive, 9.
PAGE 192
Table 40. Parts list—Overall (continued) No. 16 184 FRU FRU no. CRU ID DVD/CD-RW combo drive, 9.
PAGE 193
Table 40. Parts list—Overall (continued) No. 16 FRU FRU no. 42T2545 DVD-RAM/RW drive, 9.
PAGE 194
Table 40. Parts list—Overall (continued) No. 16 186 FRU FRU no. 42T2557 DVD-RAM/RW drive, 9.
PAGE 195
Table 40. Parts list—Overall (continued) No. 16 FRU FRU no. 42T2551 DVD-RAM/RW drive, 9.
PAGE 196
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 16 Blu-ray drive, 9.5 mm v 2055-CTO, 8Tx, ATx v 2056-CTO v 2081-CTO v 2082-CTO, 3Jx, 5Px, 6Rx, 6Zx, 84x v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO, 42x, 46x, 4Bx, 4Vx, 67x v 4062-CTO, 2Gx, 3Sx v 4063-CTO, 2Ux v 4064-CTO v 4065-CTO 42T2559 * 16 Travel cover, 9.
PAGE 197
Table 40. Parts list—Overall (continued) No. 18 18 18 18 18 18 18 FRU FRU no.
PAGE 198
Table 40. Parts list—Overall (continued) No. 18 18 18 18 18 18 18 190 FRU FRU no.
PAGE 199
Table 40. Parts list—Overall (continued) No. 18 18 18 18 18 19 FRU FRU no.
PAGE 200
Table 40. Parts list—Overall (continued) No. 19 192 FRU FRU no.
PAGE 201
Table 40. Parts list—Overall (continued) No. 19 FRU FRU no.
PAGE 202
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 203
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 204
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 205
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 206
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 207
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 21 CPU assembly, Intel Celeron Dual Core processor T1600 (1.66 GHz) v 2055-CTO v 2056-CTO v 2081-CTO v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO, 6Qx v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO 42W8148 N 21 CPU assembly, Intel Celeron Dual Core processor T1700 (1.
PAGE 208
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 21 CPU assembly, Intel Celeron Dual Core processor T3000 (1.8 GHz) v 2055-CTO v 2056-CTO v 2081-CTO v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO 43R0894 N 21 CPU assembly, Intel Celeron Dual Core processor T3100 (1.
PAGE 209
Table 40. Parts list—Overall (continued) No. FRU ® TM FRU no. CRU ID 21 CPU assembly, Intel Core 2 Duo mobile processor P7370 (2.0 GHz) v 2055-CTO, 7Ex, 7Fx v 2056-CTO v 2081-CTO v 2082-CTO, 7Dx v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO, 5Vx, 6Rx, 6Sx v 2243-CTO, 6Xx, 76x v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO 42W8149 N 21 CPU assembly, Intel Core 2 Duo mobile processor P8400 (2.
PAGE 210
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 21 CPU assembly, Intel Core 2 Duo mobile processor P8400 (2.
PAGE 211
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 21 CPU assembly, Intel Core 2 Duo mobile processor P8600 (2.
PAGE 212
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 21 CPU assembly, Intel Core 2 Duo mobile processor P8800 (2.
PAGE 213
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 21 CPU assembly, Intel Core 2 Duo mobile processor P9500 (2.
PAGE 214
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 21 CPU assembly, Intel Core 2 Duo mobile processor P9700 (2.80 GHz) v 2055-CTO, ASx, ATx v 2056-CTO v 2081-CTO v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO, 64x, 65x, 69x v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO 45M2830 N 21 CPU assembly, Intel Core 2 Duo mobile processor T5670 (1.
PAGE 215
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 21 CPU assembly, Intel Core 2 Duo mobile processor T5870 (2.0 GHz) v 2055-CTO v 2056-CTO v 2081-CTO v 2082-CTO, 5Mx, 5Nx, 5Rx, 6Cx, 6Dx, 6Ex, 6Fx, 6Gx, 6Hx, 73x v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO, 6Dx, 6Ex v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO 43N7739 N 21 CPU assembly, Intel Core 2 Duo mobile processor T6570 (2.
PAGE 216
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 21 CPU assembly, Intel Core 2 Duo mobile processor T9400 (2.
PAGE 217
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 21 CPU assembly, Intel Core 2 Duo mobile processor T9550 (2.
PAGE 218
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 21 CPU assembly, Intel Core 2 Duo mobile processor T9600 (2.
PAGE 219
Table 40. Parts list—Overall (continued) No. 21 FRU FRU no. CRU ID CPU assembly, Intel Core 2 Duo mobile processor T9900 (3.
PAGE 220
Table 40. Parts list—Overall (continued) No. 22 212 FRU FRU no.
PAGE 221
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 222
Table 40. Parts list—Overall (continued) No. FRU ® FRU no.
PAGE 223
Table 40. Parts list—Overall (continued) No. FRU FRU no.
PAGE 224
Table 40. Parts list—Overall (continued) No. 25 216 FRU FRU no.
PAGE 225
Table 40. Parts list—Overall (continued) No. 25 FRU FRU no.
PAGE 226
Table 40. Parts list—Overall (continued) No. FRU FRU no. CRU ID 26 Keyboard (see “Keyboard” on page 237.) 27 TrackPoint stick caps 91P9642 * — Thermal grease 91P8835 N — Telephone cable, RoHS 91P6915 * — AC adapter (see “AC adapters” on page 241.
PAGE 227
LCD FRUs In ThinkPad T500 and W500, there are following types of LCDs. v 15.4-in. WXGA TFT LCD (Table 41 on page 220) v 15.4-in. WSXGA+ TFT LCD (Table 42 on page 229) v 15.4-in.
PAGE 228
Table 41. Parts list—15.4-in. WXGA TFT No. FRU FRU no.
PAGE 229
Table 41. Parts list—15.4-in. WXGA TFT (continued) No. FRU FRU no.
PAGE 230
Table 41. Parts list—15.4-in. WXGA TFT (continued) No. 7 222 FRU FRU no.
PAGE 231
Table 41. Parts list—15.4-in. WXGA TFT (continued) No. 7 FRU FRU no.
PAGE 232
Table 41. Parts list—15.4-in. WXGA TFT (continued) No. 8 224 FRU FRU no. 42T0969 Bluetooth daughter card (BDC-2.
PAGE 233
Table 41. Parts list—15.4-in. WXGA TFT (continued) No. FRU FRU no. CRU ID 9 LCD panel, 15.4-in.
PAGE 234
Table 41. Parts list—15.4-in. WXGA TFT (continued) No. FRU FRU no. CRU ID 9 LCD panel, 15.4-in.
PAGE 235
Table 41. Parts list—15.4-in. WXGA TFT (continued) No. 9 FRU FRU no. 42T0587 LCD panel, 15.4-in.
PAGE 236
Table 41. Parts list—15.4-in. WXGA TFT (continued) No. 9 228 FRU FRU no. 42T0797 LCD panel, 15.4-in.
PAGE 237
Table 41. Parts list—15.4-in. WXGA TFT (continued) No. FRU FRU no. CRU ID 9 42T0795 LCD panel, 15.4-in.
PAGE 238
Table 42. Parts list—15.4-in. WSXGA+ TFT (continued) No. FRU FRU no.
PAGE 239
Table 42. Parts list—15.4-in. WSXGA+ TFT (continued) No. 8 FRU FRU no. CRU ID Bluetooth daughter card (BDC-2.
PAGE 240
Table 42. Parts list—15.4-in. WSXGA+ TFT (continued) No. 9 232 FRU FRU no. CRU ID LCD panel, 15.4-in.
PAGE 241
Table 42. Parts list—15.4-in. WSXGA+ TFT (continued) No. FRU FRU no. CRU ID 9 LCD panel, 15.4-in.
PAGE 242
Table 43. Parts list—15.4-in. WUXGA TFT (continued) No. FRU FRU no.
PAGE 243
Table 43. Parts list—15.4-in. WUXGA TFT (continued) No. FRU FRU no. CRU ID 8 42T0969 Bluetooth daughter card (BDC-2.
PAGE 244
Table 43. Parts list—15.4-in. WUXGA TFT (continued) No. FRU FRU no. CRU ID 9 42T0613 LCD panel, 15.4-in.
PAGE 245
Keyboard Table 44.
PAGE 246
Table 45. Parts list—Keyboard Language P/N Arabic 42T3212 42T3276 42T3146 Belgian 42T3213 42T3277 42T3147 Brazilian Portuguese 42T3240 42T3304 42T3174 Canadian French (058) 42T3211 42T3275 42T3145 Canadian French (Acnor) 42T3210 42T3274 42T3144 Czech 42T3214 42T3278 42T3148 Danish 42T3215 42T3279 42T3149 Dutch 42T3223 42T3287 42T3157 Finnish, Swedish 42T3230 42T3294 42T3164 French 42T3217 42T3281 42T3151 German 42T3218 42T3282 42T3152 Greek (U.S.
PAGE 247
Miscellaneous parts Table 46. Parts list—Miscellaneous parts FRU P/N CRU ID Screw kit (including nylon-coated screws): v M2 × 5 mm (black), flat head (11) v M2 × 2.7 mm (black), flat head (10) v M2 × 3.5 mm (black), bind head (18) v M2 × 14 mm (black), flat head (10) v M2 × 14 mm with TB2440B (2) v M2 × 2.8 mm (silver), flat head (5) v M2 × 14 mm HDD security (2) v Security screw (2) v M2.5 × 4 mm (black), flat head (2) v M2.5 × 6.
PAGE 248
Table 46. Parts list—Miscellaneous parts (continued) FRU P/N CRU ID System miscellaneous parts: v (a)Cable assembly, DC in. v (b) Bracket, N/B, fan discrete/integ. v (c) Bracket, VGA, fan discrete/integ.
PAGE 249
AC adapters Table 47.
PAGE 250
Power cords A ThinkPad power cord for a specific country or region is usually available only in that country or region: Table 49. Parts list—2-pin power cords Region P/N CRU ID Argentina v models -CTO, xxY 42T5020 42T5105 Brazil v models -CTO, xxP 42T5180 42T5183 Canada, U.S. v models -CTO, xxF, xxL, xxS, xxU 42T5008 42T5093 Japan v models -CTO, xxE, xxJ 42T5014 42T5099 * Table 50.
PAGE 251
Recovery discs Windows XP Professional (32 bit) DVDs Windows XP Professional (32 bit) is preinstalled as the operating system in the following models: v 2055-CTO, 2Mx, 65x, 74x, 75x, 76x, A7x, A8x v 2056-CTO, 79x v 2081-CTO v 2082-CTO, 57x, 58x, 5Px, 5Qx, 6Rx, 6Vx, 6Wx, 7Rx, 7Ux, 7Vx, 7Xx, 7Yx, 82x, 87x, 97x, 98x, 9Ex, AAx, ABx, ACx v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO, 2Lx, 2Rx, 2Sx, 54x, 59x, 5Ax, 5Nx, 8Bx, 8Cx, 8Dx v 2241-CTO, 58x v 2242-CTO, 37x, 5Ex, 6Bx, 6Cx, 72x, 74x, 75x, 8Px, 8Qx v 2243-CTO,
PAGE 252
Table 51.
PAGE 253
Windows Vista Home Basic (32 bit) DVDs Windows Vista Home Basic (32 bit) is preinstalled as the operating system in the following models: v 2055-CTO v 2056-CTO v 2081-CTO v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO, 28x v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO, 3Fx v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO Parts list 245
PAGE 254
Table 52.
PAGE 255
Windows Vista Home Premium (32 bit) DVDs Windows Vista Home Premium (32 bit) is preinstalled as the operating system in the following models: v 2055-CTO v 2056-CTO v 2081-CTO, 7Tx v 2082-CTO, 86x, B5x v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO, 24x, 36x, 38x, 39x, 4Jx v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO, 2Dx, 2Fx v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO Table 53.
PAGE 256
Windows Vista Business (32 bit) DVDs Windows Vista Business (32 bit) is preinstalled as the operating system in the following models: v 2055-CTO, 2Bx, 2Cx, 2Ex, 2Lx, 2Px, 3Ax, 45x, 46x, 47x, 48x, 49x, 4Ax, 4Bx, 4Cx, 4Dx, 4Ex, 4Fx, 4Gx, 4Hx, 5Rx, 5Vx, 5Wx, 62x, 63x, 64x, 77x, 78x, 7Gx, 7Hx, 7Jx, 7Kx, 7Lx, 89x, 8Ax, 8Bx, 8Cx, 8Dx, 8Ex, 8Fx, 8Gx, 8Hx, 8Jx, 8Kx, 8Lx, 8Mx, 8Nx, 8Px, 8Qx, 8Tx, 8Ux, 9Ax, 9Bx, 9Cx, 9Dx, 9Kx, 9Lx, 9Rx, 9Sx, 9Tx, 9Ux, 9Vx, 9Wx, 9Xx, 9Yx, 9Zx, A2x, A3x, A4x, A5x, AUx, AVx, AWx, AXx, A
PAGE 257
Table 54.
PAGE 258
Windows Vista Business (64 bit) DVDs Windows Vista Business (64 bit) is preinstalled as the operating system in the following models: v 2055-CTO v 2056-CTO v 2081-CTO v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO, 32x, 3Vx, 42x, 46x, 4Bx, 4Qx, 4Rx v 4062-CTO, 4Hx, 4Mx, 4Nx, 54x, 5Ux, 5Vx v 4063-CTO, 34x v 4064-CTO v 4065-CTO Table 55.
PAGE 259
Windows Vista Ultimate (32 bit) DVDs Windows Vista Ultimate (32 bit) is preinstalled as the operating system in the following models: v 2055-CTO, 8Rx, 8Sx v 2056-CTO v 2081-CTO v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO, 26x, 4Gx v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO, 3Lx v 4061-CTO, 2Mx, 2Nx, 2Px, 2Qx, 4Ax v 4062-CTO, 2Ax, 3Gx, 3Hx v 4063-CTO, 2Tx, 2Ux v 4064-CTO v 4065-CTO Parts list 251
PAGE 260
Table 56.
PAGE 261
Windows 7 Home Basic (32 bit) DVDs Windows 7 Home Basic (32 bit) is preinstalled as the operating system in the following models: v 2055-CTO v 2056-CTO v 2081-CTO v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO, 7Lx, 7Ux v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO Table 57.
PAGE 262
Windows 7 Home Premium (32 bit) DVDs Windows 7 Home Premium (32 bit) is preinstalled as the operating system in the following models: v 2055-CTO v 2056-CTO v 2081-CTO v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO, 7Vx v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO Table 58.
PAGE 263
Windows 7 Home Premium (64 bit) DVDs Windows 7 Home Premium (64 bit) is preinstalled as the operating system in the following models: v 2055-CTO v 2056-CTO v 2081-CTO v 2082-CTO v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO v 4062-CTO v 4063-CTO v 4064-CTO v 4065-CTO Table 59.
PAGE 264
Windows 7 Professional (32 bit) DVDs Windows 7 Professional (32 bit) is preinstalled as the operating system in the following models: v 2055-CTO, A6x, A9x, AHx, ALx, AMx, ANx, APx, AQx, ARx, ASx, ATx v 2056-CTO v 2081-CTO v 2082-CTO, 96x, 99x, 9Fx, 9Gx, 9Hx, 9Jx, 9Nx, 9Px, 9Qx, ADx, AEx, AFx, AGx, BMx, BNx, BPx v 2083-CTO v 2087-CTO v 2088-CTO, 3Zx, 42x, 43x, 44x v 2089-CTO, 8Ex, 8Fx, 8Gx, 8Hx, 8Jx, 8Kx, 8Lx, 8Mx v 2241-CTO v 2242-CTO, 8Rx v 2243-CTO, 7Yx, 8Vx, 8Yx, 92x, 94x, 95x, 96x, 97x, 99x, 9Bx, 9Cx, 9
PAGE 265
Table 60.
PAGE 266
Windows 7 Professional (64 bit) DVDs Windows 7 Professional (64 bit) is preinstalled as the operating system in the following models: v 2055-CTO, AJx, AKx v 2056-CTO v 2081-CTO v 2082-CTO, BQx v 2083-CTO v 2087-CTO v 2088-CTO v 2089-CTO v 2241-CTO v 2242-CTO v 2243-CTO v 2246-CTO v 2247-CTO v 2261-CTO v 4058-CTO v 4061-CTO, 65x, 66x, 67x, 6Dx, 6Fx, 6Gx, 6Hx, 6Kx, 6Lx v 4062-CTO, 5Fx, 5Gx, 5Px v 4063-CTO v 4064-CTO v 4065-CTO Table 61.
PAGE 267
Common service tools Table 62. Parts list—Common service tools Tool P/N Screwdriver kit 95F3598 1/4″ drive spinner handle 1650840 1/4″ Sq. to 1/4″ hex torx adapter 93F2838 TR7-TR-10 tamper resistant torx bits 00P6967 Removal tool antenna RF connector 08K7159 USB 2.
PAGE 268
260 ThinkPad T500 and W500 Hardware Maintenance Manual
PAGE 269
Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
PAGE 270
vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.
PAGE 271
PAGE 272
Part Number: 43Y6630_04 (1P) P/N: 43Y6630_04