Operation Manual

7. Install the new base cover assembly in place 1 . Ensure that the latches of the base cover assembly are
secured under the base cover assembly. Then tighten the screws to secure the base cover assembly
2 .
8. Reinstall the removable battery.
9. Reinstall the connector cap as shown.
10. Turn the computer over. Connect the ac power adapter and all cables to the computer.
Replacing the memory module
Before you start, read “Important safety information” on page v and print the following instructions.
Increasing memory capacity is an effective way to make programs run faster. You can increase memory
capacity by replacing or adding a memory module.
Note: The operating speed of the memory module has dependency on the system configuration. In some
conditions, the memory module in your computer might not be able to operate at the maximum speed.
Attention:
106
T580 and P52s User Guide