User's Manual

4. Click Access BIOS. The System Restart Required window is displayed.

5. Click Yes. The computer restarts, and the BIOS Setup Utility menu

appears.

If you have set a supervisor password, the BIOS Setup Utility menu

appears after you enter the password. You can start the utility by pressing

Enter instead of entering the supervisor password; however, you cannot

change the parameters that are protected by the supervisor password. For

more information, see the on-board help.

6. Using the cursor keys, move to an item you want to change. When the

item you want is highlighted, press Enter. A submenu is displayed.

7. Change the items you wish to change. To change the value of an item, use

the F5 or F6 key. If the item has a submenu, you can display it by pressing

Enter.

8. Press F3 or Esc to exit from the submenu. If you are in a nested submenu,

press Esc repeatedly until you reach the BIOS Setup Utility menu.

Note: If you need to restore the settings to their original state as of the

time of purchase, press F9 key to load the default settings. You can also

select an option in the Restart submenu to load the default settings or

discard the changes.

9. Select Restart; then press Enter. Move the cursor to the option you want

for restarting your computer; then press Enter. Your computer restarts.

Starting BIOS Setup Utility

ThinkPad

T61 Service and Troubleshooting Guide