ThinkPad X1 Carbon User Guide Machine types: 20A7 and 20A8
Note: Before using this information and the product it supports, be sure to read and understand the following: • Safety and Warranty Guide • Regulatory Notice • “Important safety information” on page vi • Appendix E “Notices” on page 151 The latest Safety and Warranty Guide and the Regulatory Notice are available on the Lenovo Support Web site at: http://www.lenovo.com/UserManuals Fifth Edition (December 2014) © Copyright Lenovo 2014.
Contents Read this first . . . . . . . . . . . . . . v Important safety information . . . . . . . . . . vi Conditions that require immediate action . . vii Safety guidelines . . . . . . . . . . . . vii Chapter 1. Product overview . . . . . . 1 Locating computer controls, connectors, and indicators. . . . . . . . . . . . . . . . . Front view. . . . . . . . . . . . . . . Right-side view. . . . . . . . . . . . . Left-side view . . . . . . . . . . . . . Bottom view . . . . . . . . . . . . . . Rear view . . . .
Performing backup and recovery operations . Using the Rescue and Recovery workspace . Creating and using a rescue medium . . . . Reinstalling preinstalled programs and device drivers . . . . . . . . . . . . . . . . Solving recovery problems . . . . . . . . Recovery overview for the Windows 8.1 operating system . . . . . . . . . . . . . . . . . . Refreshing your computer . . . . . . . . Resetting your computer to the factory default settings. . . . . . . . . . . . . . . . Using the advanced startup options .
Eurasian compliance mark . . . . . . . . . . Brazil regulatory notice . . . . . . . . . . . Mexico regulatory notice . . . . . . . . . . . Appendix B. WEEE and recycling statements . . . . . . . . . . . . . Important WEEE information . . . . . . . . . Recycling information for China . . . . . . . . Recycling information for Japan . . . . . . . . Battery recycling information for Brazil . . . . . Battery recycling information for Taiwan . . . . . Battery recycling information for the European Union . . . .
iv ThinkPad X1 Carbon User Guide
Read this first Be sure to follow the important tips given here to get the most use and enjoyment out of your computer. Failure to do so might lead to discomfort or injury, or cause your computer to fail. Protect yourself from the heat that your computer generates. When your computer is turned on or the battery is charging, the base, the palm rest, and some other parts may become hot. The temperature they reach depends on the amount of system activity and the level of charge in the battery.
Protect your computer and data when moving it. Before moving a computer equipped with a hard disk drive, do one of the following, and make sure that the power button is off or is blinking: • Turn it off. • Put it in sleep mode. • Put it in hibernation mode. This will help to prevent damage to the computer, and possible loss of data. Handle your computer gently. Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects on your computer, display, or external devices.
Conditions that require immediate action Products can become damaged due to misuse or neglect. Some product damage is serious enough that the product should not be used again until it has been inspected and, if necessary, repaired by an authorized servicer. As with any electronic device, pay close attention to the product when it is turned on. On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you might hear sounds like popping, cracking or hissing.
product are zero. Before you remove the covers from a product equipped with a power cord, always make sure that the power is turned off and that the product is unplugged from any power source. If you have any questions or concerns, contact the Customer Support Center. Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety. CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
To prevent possible overheating, do not cover the power adapter with clothing or other objects when the power adapter is plugged into an electrical outlet. Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should not exceed the power strip input rating.
Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. External devices CAUTION: Do not connect or disconnect any external device cables other than USB cables while the computer power is on; otherwise, you might damage your computer.
Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Notice for built-in rechargeable battery DANGER Do not attempt to replace the built-in rechargeable battery. Replacement of the battery must be done by a Lenovo-authorized repair facility or technician. Only recharge the battery strictly according to instructions included in the product documentation.
• Airflow temperatures into the computer should not exceed 35°C (95°F). Electrical current safety information DANGER Electric current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: • Do not use your computer during a lightning storm. • Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. • Connect all power cords to a properly wired and grounded electrical outlet.
Using headphones or earphones If your computer has both a headphone connector and an audio-out connector, always use the headphone connector for headphones (also called a headset) or earphones. CAUTION: Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphone and headphone output voltage and the sound pressure level. Therefore, to protect your hearing, adjust the equalizer to an appropriate level.
xiv ThinkPad X1 Carbon User Guide
Chapter 1. Product overview This chapter provides information about the locations of connectors, locations of important product labels, computer features, specifications, operating environment, and preinstalled programs.
1 Camera Use the camera to take pictures or hold a video conference. For more information, see “Using the camera” on page 50. 2 Microphones The built-in microphones capture sound and voice when used with a program capable of handling audio. 3 Power button Use the power button to turn on the computer. To turn off the computer, use the Start menu shutdown option on the Microsoft® Windows® 7 operating system. For the Windows 8.
10 Ambient light sensor The ambient light sensor detects the surrounding light conditions. Then the computer adjusts the screen brightness and keyboard backlight accordingly. Right-side view Figure 2. Right-side view 1 1 USB 3.0 connector 3 Fan louvers 2 Ethernet extension connector 4 Security-lock slot USB 3.0 connector The Universal Serial Bus (USB) 3.0 connector is used for connecting USB-compatible devices, such as a USB printer or a digital camera.
3 Fan louvers The fan louvers and internal fan enable air to circulate in the computer and to ensure proper cooling, especially the cooling of the microprocessor. Note: To ensure proper airflow, do not place any obstacles in front of the fan louvers. 4 Security-lock slot To protect your computer from theft, you can purchase a security cable lock that fits the security-lock slot to lock the computer to a stationary object.
Left-side view Figure 3. Left-side view 1 1 Power connector 4 Mini DisplayPort® connector 2 Lenovo OneLink connector 5 Always-on USB 3.0 connector 3 HDMI™ connector 6 Combo audio connector Power connector When the ac power adapter is connected to the ac power connector, the ac power adapter provides power to the computer and charges the battery.
5 Always-on USB 3.0 connector The Always-on USB 3.0 connector is used for connecting USB-compatible devices, such as a USB printer or a digital camera. By default, the Always-on USB 3.
Bottom view Figure 4. Bottom view 1 Fan louvers 3 Emergency-reset hole 2 Speakers 1 Fan louvers The fan louvers and internal fan enable air to circulate in the computer and to ensure proper cooling, especially the cooling of the microprocessor. Note: To ensure proper airflow, do not place any obstacles in front of the fan louvers. 2 Speakers Your computer is equipped with a pair of stereo speakers.
Rear view Figure 5. Rear view 1 Micro-SIM-card tray (on some models) 1 Micro-SIM-card tray (on some models) If your computer supports the wireless wide area network (WAN) feature, a micro Subscriber Identification Module (SIM) card might be required to establish wireless WAN connections. Depending on the country or region of delivery, a micro SIM card might be already installed in the micro-SIM-card tray. Note: Ensure that you use a micro SIM card. Do no use a standard-sized SIM card.
Status indicators The status indicators show the current status of your computer. Note: Your computer might have slight variations from the following illustrations. 1 Caps Lock indicator • On: Caps Lock mode is turned on. You can type all alphabetic characters (A-Z) in upper case without pressing the Shift key. To turn off the Caps Lock mode, press the left Shift key twice. • Off: Caps Lock mode is turned off. To turn on Caps Lock mode, press the left Shift key twice.
• Blink fast: The computer is entering sleep or hibernation mode. • Blink slowly: The computer is in sleep mode. • Off: The computer is off or in hibernation mode. Locating important product information This section provides information to help you locate the machine type and model label, the FCC ID and IC Certification label, the Windows Certificate of Authenticity label, and the Genuine Microsoft label. Machine type and model information The machine type and model label identifies your computer.
The FCC ID and IC Certification number labels are affixed on the wireless WAN card 1 and wireless LAN card 2 installed in your computer. Note: Use only Lenovo-authorized wireless communication cards for the computer. If you install an unauthorized wireless communication card that is not approved for use in your computer, an error message will be displayed and the computer will beep when you turn on the computer.
Genuine Microsoft label The Genuine Microsoft label is provided on models that are licensed to use a Windows 8.1 operating system. The version of the Windows 8.1 operating system is printed on the label. If your computer model is licensed to use the Windows 8.1 Pro operating system, that license also permits you to use the Windows 7 Professional operating system in place of the Windows 8.1 Pro operating system if you prefer. Lenovo computers that are licensed for use with a Windows 8.
• Camera • Microphones • Multi-touch technology (on some models) Adaptive Keyboard • 5-row keyboard with backlight function • Adaptive Keys • ThinkPad TrackPoint pointing device and trackpad Interface • Audio connector • Lenovo OneLink connector • External monitor connectors (HDMI and Mini DisplayPort connectors) • Always-on USB 3.0 connector • USB 3.
Heat output • 45 W (154 Btu/hr) maximum • 65 W (222 Btu/hr) maximum Power source (ac power adapter) • Sine-wave input at 50 to 60 Hz • Input rating of the ac power adapter: 100 to 240 V ac, 50 to 60 Hz Battery status • For the percentage of remaining battery power, go to the desktop screen and check the battery-status icon in the Windows notification area. Operating environment This section provides information about the operating environment of the computer.
Accessing Lenovo programs on the Windows 7 operating system You can access Lenovo programs on the Windows 7 operating system through Windows Search or from Control Panel. The icon name displayed in the search result or Control Panel might be different from the program name. You can find the program by its program name or icon name as shown in the Lenovo programs available on the Windows 7 operating system table.
Accessing Lenovo programs on the Windows 8.1 operating system You can access Lenovo programs on the Windows 8.1 operating system from the Start screen or the Apps screen. Press the Windows key to go to the Start screen. Click a Lenovo program to launch it. If you cannot find the program you need, click the arrow icon to go to the Apps screen. Find the desired program in the list or search for the program in the search box.
• Message Center Plus (Windows 7) The Message Center Plus program automatically displays messages to inform you about important notices from Lenovo, such as alerts on system updates and alerts on conditions that require your attention. • Mobile Broadband Connect (Windows 7) The Mobile Broadband Connect program enables you to connect the computer to the mobile broadband network through a supported wireless WAN card.
• Lenovo Microphone Mute (Windows 7 and Windows 8.1) The Lenovo Microphone Mute program enables you to set which recording devices will be controlled by the microphone-mute key on your computer. By pressing the microphone-mute key, you can mute or unmute the recording devices that you have selected in the Lenovo Microphone Mute program. • Lenovo QuickControl (Windows 7 and Windows 8.1) The Lenovo QuickControl program enables you to control your computer remotely from your smartphone.
Chapter 2. Using your computer This chapter provides information on using some of the computer components.
How do I use battery power more effectively when I am on the go? • To conserve power, or to suspend operation without exiting programs or saving files, see “Power-saving modes” on page 38. • To achieve the best balance between performance and power saving, change power plan settings. See “Managing the battery power” on page 38.
3. On the Navigation tab, locate the Start screen section, and then do one of the following: – To set the desktop as your default startup screen, select When I sign in or close all apps on a screen, go to the desktop instead of Start so a check is visible. – To set the Start screen as your default startup screen, remove the check from the When I sign in or close all apps on the screen, go to desktop instead of Start checkbox. 4. Click OK to save the new setting.
Touch gesture (touch models only) Description Touch: Drag an item to the desired location. Mouse action: Click, hold, and drag an item. Function: Move an object. Supported operating systems: Windows 7 and Windows 8.1 Touch: Move two fingers closer together. Mouse action: Press the Ctrl key while scrolling the mouse wheel backward. Function: Zoom out. Supported operating systems: Windows 7 and Windows 8.1 Touch: Move two fingers farther apart.
Touch gesture (touch models only) Description Touch: Swipe in and out on the left edge. Mouse action: Move the pointer to the top-left corner of the screen, and then move the pointer downward along the left edge. To make a selection, click the desired app. Function: View the recently used apps or select an active app from the list. Supported operating system: Windows 8.1 Touch: Swipe up to the top edge. Mouse action: Click the downward arrow ( of the Start screen.
• Use a dry, soft, and lint-free cloth or a piece of absorbent cotton to remove fingerprints or dust from the multi-touch screen. Do not apply solvents to the cloth. • Gently wipe the screen using a top-down motion. Do not apply any pressure on the screen. Using the Adaptive Keys Your computer has a row of Adaptive Keys to help you work easily and effectively. Adaptive Keys overview The following illustration shows the location of the Adaptive Keys 1 .
You also can cycle through the available modes by tapping the Fn key. The following illustration shows the location of the Fn key 1 . You can customize the order in which the modes are displayed and which modes are available when you cycle through the modes with the Fn key. The Home mode and Function mode are always available. Depending on your needs, you can customize the Adaptive Keys by removing Web-browser mode and Web-conference mode from the cycle list when you tap the Fn key.
Web-conference mode When you launch a Voice-over-Internet-Protocol (VoIP) application that the Adaptive Keyboard recognizes, the Adaptive Keys automatically change to the Web-conference mode, providing functions specifically for using a VoIP application. The following illustration shows the icons displayed in the Web-conference mode. For more information, see “Functions of the Adaptive Keys” on page 26.
Table 2. Functions of the Adaptive Keys Adaptive Keys Functions Fn key • Switches among the available Adaptive Keys modes when you tap the Fn key. • Initiates the Quick-access mode when you tap and hold the Fn key. If you release the Fn key, the Adaptive Keys return to the mode before your tap the Fn key. Setting a Quick-access mode enables you to quickly display your desired mode of the Adaptive Keys with no need to switch among the various modes.
Table 2. Functions of the Adaptive Keys (continued) Adaptive Keys Functions Adds a new tab in the Web browser window. Changes the microphone noise-cancellation sensitivity. There are three kinds of noise-cancellation sensitivity : • : Only my voice • : Normal • : Multiple voices Turns on or turns off the camera. When the camera is turned off, the red camera-off indicator turns on . • Changes camera modes when you tap the icon.
Table 2. Functions of the Adaptive Keys (continued) Adaptive Keys Functions Opens the Adaptive Keyboard Settings window. For more information, see “Setting the Adaptive Keys” on page 30. Rotates the screen clockwise. Each time you tap the icon, the computer screen rotates 90 degrees. • Opens the predefined cloud application as defined in the cloud settings when you tap the icon. • Opens the Cloud Settings screen when you tap and hold the icon for about two seconds.
Table 3. Fn key combinations Fn key combination Function Fn+B Has the same function as the Break key on a conventional keyboard. Fn+I Has the same function as the Insert key on a conventional keyboard. Fn+K Has the same function as the ScrLK key on the conventional keyboard. Fn+P Has the same function as the Pause key on the conventional keyboard. Fn+S Has the same function as the SysRq key on the conventional keyboard. Fn+T Has the same function as the Prt Sc key on a conventional keyboard.
Windows key On the Windows 7 operating system, press the Windows key 1 to open the Start menu. On the Windows 8.1 operating system, press the Windows key to switch between the current workspace and the Start screen. You also can use the Windows key together with another key to achieve other functions. For more information, refer to the help information system of the Windows operating system.
Using the ThinkPad pointing device Depending on your preference, you can use the ThinkPad pointing device in one of the following modes: • TrackPoint mode • Trackpad mode • Classic TrackPoint mode To change a mode for the ThinkPad pointing device, see “Customizing the ThinkPad pointing device” on page 35. Note: By default, the TrackPoint mode and the Trackpad mode are both enabled. You can use either one of them.
1 Point Use the pointing stick to move the pointer on the screen. To use the pointing stick, apply pressure to the pointing stick nonslip cap in any direction parallel to the keyboard. The pointer moves accordingly but the pointing stick itself does not move. The speed at which the pointer moves depends on the amount of pressure you apply to the pointing stick. 2 Scroll Press and hold the dotted scrolling bar while applying pressure to the pointing stick in the vertical or horizontal direction.
Note: Compared with the TrackPoint mode, the Classic TrackPoint mode enlarges the right-click zone so that the right- and left-click zones on the trackpad are divided equally. However, the touch gestures are disabled and cannot be used in the Classic TrackPoint mode. 1 Point Use the pointing stick to move the pointer. To use the pointing stick, apply pressure to the nonslip cap on the pointing stick in any direction parallel to the keyboard.
Two-finger zoom out Put two fingers on the trackpad and move them closer together to zoom out. Two-finger zoom in Put two fingers on the trackpad and move them farther apart to zoom in. Three-finger swipe Put three fingers on the trackpad and move them left to show the next item. Move them right to show the previous item. Four-finger swipe Put four fingers on the trackpad and move them upward to view and choose from opened apps.
1. Go to Control Panel. 2. Click Hardware and Sound ➙ Mouse. The Mouse Properties window is displayed. 3. In the Mouse Properties window, select the ThinkPad tab. 4. Follow the instructions on the screen. Replacing the cap of pointing stick The cap 1 on the end of the pointing stick is removable. After you use the cap for a period of time, you might consider replacing the cap with a new one. To get a new cap, contact Lenovo.
– How often you use the wireless features. To check for detailed battery status information, do the following: • For Windows 8.1: Start the Lenovo Settings program and click Power. • For Windows 7: Start the Power Manager program and click the Battery tab.
– When the battery has not been used for a long time. Charging the battery When you check battery status and find that the percentage of power remaining is low or when the power alarm alerts you that the remaining power is low, you need to charge your battery. If an ac outlet is convenient, plug the ac power adapter into the outlet, and then plug it into ac power connector of the computer. The battery will be fully charged in about three to six hours.
– For Windows 7: Refer to the help information system of the Power Manager program. For instructions on how to start the Power Manager program, see “Lenovo programs” on page 14. To put your computer into sleep mode, do the following: – For Windows 8.1: Move the pointer to the bottom-right corner of the screen to bring up the charms. Then click Settings ➙ Power ➙ Sleep. – For Windows 7: Use the Start menu shutdown option.
DANGER Do not attempt to disassemble or modify the battery pack. Attempting to do so can cause an explosion, or liquid leakage from the battery pack. A battery pack other than the one specified by Lenovo, or a disassembled or modified battery pack is not covered by the warranty. DANGER If the rechargeable battery pack is incorrectly replaced, there is danger of an explosion. The battery pack contains a small amount of harmful substances.
DANGER There is a danger of an explosion if the coin-cell battery is incorrectly placed. The lithium battery contains lithium and can explode if it is not properly handled, or disposed of. Replace only with a battery of the same type. To avoid possible injury or death, do not: (1) throw or immerse into water, (2) allow it to heat to more than 100°C (212°F), or (3) attempt to repair or disassemble it. Dispose of it as required by local ordinances or regulations and your company's safety standards.
The Ethernet extension adapter has two indicators that show the status of the network connection. When the upper-left indicator is solid green, it indicates that the computer connects to a LAN and a session with the network is available. When the upper-right indicator blinks yellow, it indicates that data is being transmitted. Wireless connections Wireless connection is the transfer of data without the use of cables but by means of radio waves only.
Note: Ensure that Airplane mode is set to off. • Move your pointer to the top-right or bottom-right corner to display the charms, click Settings, then click the wireless-network-connection-status icon. A list of available wireless networks is displayed. • Go to the desktop screen, then click the wireless-network-connection-status icon in the Windows notification area. A list of available wireless networks is displayed. 3. Double-click a network to connect to it. Provide required information if needed.
Access Connections icon status: • No location profile is active or none exists. • Current location profile is disconnected. • Current location profile is connected. Wireless status icon status • Power to the wireless radio is off. • Power to the wireless radio is on. No association. • Power to the wireless radio is on. No signal. • Power to the wireless radio is on. The signal strength of the wireless connection is excellent. • Power to the wireless radio is on.
• Medium signal • Strong signal Access Connections icon status: • No location profile is active or none exists. • Current location profile is disconnected. • Current location profile is connected.
few centimeters. Before you use the NFC feature, ensure that the NFC device option is set to Enabled in the ThinkPad Setup program. See “Security menu” on page 100. By default, the NFC feature is enabled. If you have disabled the NFC feature, do the following to enable the NFC feature: • For the Windows 7 operating system: 1. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 95. 2. Select Security ➙ I/O Port Access. 3. Set the NFC device option to Enabled. • For the Windows 8.
Connecting an external monitor To connect an external monitor, do the following: 1. Connect the external monitor to the Mini DisplayPort connector of your computer. 2. Connect the external monitor to an electrical outlet. 3. Turn on the external monitor. 4. Tap the display-mode icon in the Function mode to change the display output location. This enables you to switch between viewing output on the external monitor, the computer monitor, or both monitors.
• If you set a resolution higher than the resolution you are using on the computer monitor, and use an external monitor that does not support that resolution, take advantage of the virtual screen function, which enables you to display only a part of the high-resolution screen image your computer produces. You can see other parts of the image by moving the screen with the TrackPoint pointing device or another pointing device.
3. Set the resolution for the primary display. 4. Click the Monitor-2 icon, which is for the secondary display (the external display by default). 5. Set the resolution for the secondary display. 6. Click Advanced settings and set up the color quality on the Monitor tab. 7. Click OK to apply the changes. Considerations for using the Extend desktop function • In Extend desktop mode, only the primary display shows DOS full-screen, and the other display is blacked out.
Using the camera If your computer has a camera, you can use the camera to preview your video image and take a snapshot of your current image. To start the camera, do the following: • For Windows 8.1, do one of the following: – Tap the camera icon in the Web-conference mode. For more information on how to display the Web-conference mode, see “Adaptive Keys overview” on page 24. – Click Camera from the Start screen. • For Windows 7, do one of the following: – Tap the camera icon in the Web-conference mode.
Notes: • Some camera gestures are available only for certain applications. • Ensure that your hand is within the camera view so that the camera can capture your hand gestures. • When you are using the camera gestures, maintain a distance of 0.5–2 meters (19.69–78.74 inches) between the camera and your hand. • Your computer might look different from the following illustrations. Table 5.
– Tap and hold the camera-gestures icon in the Web-conference mode for about two seconds. The Camera Gestures settings screen opens. • Refer to the Setup Guide poster that comes with your computer. Configuring camera gestures settings You can configure the following camera gestures settings to meet your needs: • Turn on or turn off the on-screen visual feedback when a gesture is detected. • Turn on or turn off the sound feedback when a gesture is detected.
Chapter 3. You and your computer This chapter provides information about accessibility, comfort, and traveling with your computer. • “Accessibility and comfort” on page 53 • “Traveling with your computer” on page 55 Accessibility and comfort Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform.
Display: Position the display to maintain a comfortable viewing distance of 510-760 mm (20-30 inches). Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep the display screen clean and set the brightness to levels that enable you to see the screen clearly. Head position: Keep your head and neck in a comfortable and neutral (vertical, or upright) position. Chair: Use a chair that gives you good back support and seat height adjustment.
Assistive technologies Some accessibility technologies are available through the Accessibility Options program. Depending on your operating system, the number of accessibility options available varies. In general, accessibility options enhance the way users with hearing, vision, or mobility limitations navigate and use their computer. For example, some users might not have the fine motor skills required to use a mouse or select key combinations.
• Mini-DisplayPort to VGA Adapter Cable • External mouse, if you are accustomed to using one • Ethernet extension adapter • Ethernet cable • A quality carrying case that provides adequate cushion and protection • External storage device If you are traveling to another country, you might want to consider an ac power adapter for the country to which you are traveling. To purchase travel accessories, go to http://www.lenovo.com/accessories.
Chapter 4. Security This chapter provides information about how to protect your computer from theft and unauthorized use.
3. Depending on your need, do one of the following: • To set a password, do the following: a. In the Enter New Password field, type a desired password and press Enter. b. In the Confirm New Password field, retype the password and press Enter. • To change a password, do the following: a. In the Enter Current Password field, type the current power-on password and press Enter. b.
– Internal wireless device – Internal Bluetooth device – Internal Network Option ROM – Internal wireless WAN device – Security mode – Fingerprint reader priority Notes: • The system administrator can set the same supervisor password on many ThinkPad notebook computers to make administration easier. • When Lock UEFI BIOS Settings option is enabled, all BIOS settings cannot be changed. To change the settings, a supervisor password is required.
If a user hard disk password has been set, but no master hard disk password has been, the user must enter the user hard disk password to access files and applications on the solid-state drive. • Master hard disk password The master hard disk password also requires a user hard disk password. The master hard disk password is usually set and used by a system administrator. It enables the administrator to access any solid-state drive in a system like a master key.
3. A Setup Notice window is displayed. Press Enter again to continue. The user hard disk password is changed. Note: The hard disk password cannot be removed in User HDP mode. – If you select Master HDP mode, follow the following steps to change the master hard disk password: 1. Type the current master hard disk password in the Enter Current Password field and press Enter. 2.
the Windows 7 operating system and Windows 8.1 operating system. See “Using Windows BitLocker Drive Encryption” on page 62. • Before you dispose of, sell, or hand over your computer, delete data stored on it. For more information, refer to “Notice on deleting data from your solid-state drive” on page 66. The solid-state drive built into your computer can be protected by the UEFI BIOS.
To set an item on the Security Chip submenu, do the following: 1. Restart the computer. When the logo screen is displayed, press F1 to start the ThinkPad Setup program. 2. Select Security ➙ Security Chip by using the directional keys. 3. Press Enter. The Security Chip submenu opens. 4. Move to an item you want to set by using the directional keys. When the item is highlighted, press Enter. 5. Set other items that you want to set. 6. Press F10. A Setup Confirmation window is displayed.
Swiping your finger over the fingerprint reader To swipe your finger over the fingerprint reader, do the following: 1. Placethe top joint of your fingeron the sensor. 2. Apply light pressure and swipe your finger toward youacross the reader in one smooth motion. Do not lift your finger when you are swiping it.
Indicator behavior of the fingerprint reader Indicator behavior Description Green The fingerprint reader is ready for swiping. Amber The fingerprint cannot be authenticated. Associating your fingerprints with your power-on password and hard disk password To associate your fingerprints with your power-on password and hard disk password, do the following: 1. Turn off and then turn on the computer. 2. When prompted, swipe your finger over the fingerprint reader. 3.
• Security Mode: Specifies the settings of the security mode. • Password Authentication: Enables or disables the password authentication. Note: This item is displayed only if High security mode is enabled. • Reset Fingerprint Data: Select this item to erase all of the fingerprint data stored in either the internal or external fingerprint reader.
• Format your solid-state drive, using the software for initializing it. • Use the recovery program provided by Lenovo to bring the solid-state drive back to the factory default settings. These operations, however, only change the file location of the data; they do not delete the data itself. In other words, the data retrieval processing is disabled under an operating system such as Windows operating system. The data is still there, even though it seems to be lost.
68 ThinkPad X1 Carbon User Guide
Chapter 5. Recovery overview This chapter provides information about the recovery solutions. • “Recovery overview for the Windows 7 operating system” on page 69 • “Recovery overview for the Windows 8.1 operating system” on page 74 Recovery overview for the Windows 7 operating system This section provides information about the recovery solutions provided by Lenovo on the Windows 7 operating system.
Using recovery media On the Windows 7 operating system, you can use recovery media to restore the computer to the factory default settings only. You can use recovery media to put the computer in an operational state after all other methods of recovery have failed. Attention: When you use recovery media to restore the computer to the factory default settings, all the files currently on the solid-state drive will be deleted and replaced by the factory default settings.
1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Enhanced Backup and Restore. The Rescue and Recovery program opens. 2. In the Rescue and Recovery main window, click the Launch advanced Rescue and Recovery arrow. 3. Click the Restore your system from a backup icon. 4. Follow the instructions on the screen to complete the recovery operation.
• To restore your solid-state drive from a Rescue and Recovery backup or to restore your solid-state drive to the factory default settings, click Restore your system and follow the instructions on the screen. For more information about the features of the Rescue and Recovery workspace, click Help. Notes: 1. After restoring your solid-state drive to the factory default settings, you might have to reinstall device drivers for some devices.
When the rescue medium starts, the Rescue and Recovery workspace opens. The help information for each feature is available from the Rescue and Recovery workspace. Follow the instructions to complete the recovery process. Reinstalling preinstalled programs and device drivers Your computer has provisions that enable you to reinstall selected factory-installed programs and device drivers. Reinstalling preinstalled programs To reinstall selected programs, do the following: 1. Turn on your computer. 2.
• Use recovery media if all other methods of recovery have failed and you need to restore the solid-state drive to the factory default settings. See “Performing backup and recovery operations” on page 70. Note: If you are unable to access the Rescue and Recovery workspace or the Windows environment from a rescue medium or recovery media, you might not have the rescue device (a disc, a USB hard disk drive, or other external devices) set as the first boot device in the startup device sequence.
3. Depending on your needs, do one of the following: • To perform a quick format, click Just remove my files to start the process. The process will take several minutes. • To perform a complete format, click Fully clean the drive to start the process. The process will take several hours. 4. Follow the instructions on the screen to reset your computer to the factory default settings.
3. Click Yes in the User Account Control window to allow the Recovery Media Creator program to start. 4. Ensure that you select the Copy the recovery partition from the PC to the recovery drive. option. Then click Next. Important: If you clear the Copy the recovery partition from the PC to the recovery drive. option, you will create recovery media without the recovery partition content.
Chapter 6.
5. Click Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off. Wait for a few minutes to let the computer cool. The built-in battery will be enabled automatically when the computer is connected to an ac power adapter. Installing or replacing the micro SIM card Before you start, print these instructions. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
5. Install a new micro SIM card into the tray. Note: Ensure that you use a micro SIM card. Do no use a standard-sized SIM card. The standard-sized SIM card is not compatible. 6. Insert the tray into the computer. 7. Reconnect the ac power adapter and all cables. Replacing the base cover Before you start, print these instructions. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic. To replace the base cover, do the following: 1.
3. Remove the screws 1 and loosen the screws 2 that secure the base cover. Then remove the base cover 3 . 4. Reinstall the new base cover 1 , tighten the screws 2 , and then reinstall the screws 3 . 5. Turn the computer over again. Connect the ac power adapter and all cables. Replacing the solid-state drive Before you start, print these instructions. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
• Replace the solid-state drive only if you upgrade it or have it repaired. The connectors and slot of the solid-state drive are not designed for frequent changes or replacement. • Do not drop the solid-state drive or subject it to physical shocks. Put the solid-state drive on a material, such as soft cloth, that absorbs any physical shocks. • Do not apply pressure to the cover of the solid-state drive. • Do not touch the connector.
6. Install the new solid-state drive. 7. Install the screw to secure the new solid-state drive. 8. Reinstall the base cover. 9. Turn over the computer and connect the ac power adapter and all cables. Replacing the wireless LAN card Before you start, print these instructions. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
Attention: Before you start installing the wireless LAN card, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. Static electricity could damage the card. To replace the wireless LAN card, do the following: 1. Disable the built-in battery. See “Disabling the built-in battery” on page 77. 2. Close the computer display, and turn the computer over. 3. Remove the base cover. See “Replacing the base cover” on page 79. 4.
6. Carefully remove the wireless LAN card out of the slot. 7. Align the notched edge of the new wireless LAN card with the key in the slot. Then carefully insert the card into the slot at an angle of about 20 degrees. 8. Install the screw to secure the new wireless LAN card in place.
9. Connect the antenna cables to the new wireless LAN card. Ensure that you attach the gray cable to the connector marked 2 on the card, and the black cable to the connector marked 1 on the card. 10. Reinstall the base cover. 11. Turn the computer over again. Connect the ac power adapter and all cables. Installing or replacing the wireless WAN card Before you start, print these instructions. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
a. If a tool is provided with the new card to help you disconnect cables, use the tool to disconnect the cables from the old card. If no such a tool is provided, hold the cable connector with your fingers and gently disconnect each cable from the old card. b. Remove the screw that secures the wireless WAN card. c. Carefully remove the wireless WAN card out of the slot.
5. Align the notched edge of the new wireless WAN card with the key in the slot. Then carefully insert the card into the slot at an angle of about 20 degrees. 6. Install the screw to secure the card in place. 7. Connect the antenna cables to the new wireless WAN card. Ensure that you connect the orange cable to the main connector on the card, and the blue cable to the auxiliary connector on the card. 8. Reinstall the base cover. 9. Turn the computer over again.
88 ThinkPad X1 Carbon User Guide
Chapter 7. Enhancing your computer This chapter provides instructions on how to use hardware devices to expand your computer capabilities. It includes the following topics: • “Finding ThinkPad options” on page 89 • “ThinkPad docks” on page 89 Finding ThinkPad options If you want to expand the capabilities of your computer, Lenovo has a number of hardware accessories and upgrades to meet your needs.
ThinkPad OneLink Dock and ThinkPad OneLink Pro Dock front view 1 Security-lock slot: To protect your dock from theft, you can purchase a security cable lock, such as a Kensington-style cable lock, that fits this security-lock slot to lock your dock to a desk, table, or other non-permanent fixture. 2 USB 3.0 connector: Used to connect devices that are compatible with USB 3.0.
ThinkPad OneLink Dock rear view 1 USB 2.0 connector: Used to connect devices that are compatible with USB 2.0. 2 Ethernet connector: Used to connect the dock to an Ethernet LAN. The indicators on this connector have the same function as the ones on the computer. 3 HDMI connector: Used to connect a digital audio device or video monitor that is compatible with HDMI. 4 Power connector: Used to connect the ac power adapter.
ThinkPad OneLink Pro Dock rear view 1 USB 2.0 connectors: Used to connect devices that are compatible with USB 2.0. 2 USB 3.0 connectors: Used to connect devices that are compatible with USB 3.0. 3 Ethernet connector: Used to connect the dock to an Ethernet LAN. The indicators on this connector have the same function as the ones on the computer. The Ethernet connector supports PXE boot on your computer. For more information about PXE boot, see “Preboot eXecution Environment” on page 107.
Chapter 8. Advanced configuration This chapter provides the following information to help you configure the computer: • “Installing a new operating system” on page 93 • “Installing device drivers” on page 95 • “Using the ThinkPad Setup program” on page 95 • “Using system management” on page 106 Installing a new operating system In some situations, you might need to install a new operating system. This topic provides instructions on how to install a new operating system.
When you install the Windows 7 operating system, you might need one of the following country or region codes: Country or region Code Country or region Code China SC Netherlands NL Denmark DK Norway NO Finland FI Spain SP France FR Sweden SV Germany GR Taiwan and Hong Kong TC Italy IT United States US Japan JP Installing the Windows 8.1 operating system Before you start, print these instructions.
Italy IT Japan JP United States US Installing device drivers Device driver is the program that operates a particular hardware device of the computer. If a device does not perform well or you install a new device, you need to install or update the corresponding device driver. For example, if you use the Windows 7 operating system, to use the USB 3.0 connector, you need to download and install the USB 3.0 driver. To download the latest device drivers, do the following: 1. Go to http://www.lenovo.
Main menu When you enter the ThinkPad Setup program, you will first see the Main menu as follows: • UEFI BIOS Version • UEFI BIOS Date • Embedded Controller Version • ME Firmware Version • Machine Type Model • System-unit serial number • System board serial number • Asset Tag • CPU Type • CPU Speed • Installed memory • UUID • MAC Address (Internal LAN) • Preinstalled operating system license • UEFI Secure Boot Config menu To change the configuration of your computer, select the Config tab from the ThinkPad
Table 6. Config menu items (continued) Menu item Submenu item Value Comments UEFI IPv4 Network Stack • Disabled Enable or disable Internet Protocol Version 4 (IPv4) network stack for UEFI environment. UEFI IPv6 Network Stack • Disabled UEFI PXE Boot Priority • IPv6 First • Enabled • Enabled • IPv4 First USB USB UEFI BIOS Support • Disabled Always On USB • Disabled • Enabled • Enabled - Charge in Battery Mode • Disabled USB 3.
Table 6. Config menu items (continued) Menu item Submenu item Value Comments Display Boot Display Device • ThinkPad LCD Select the display device that is to be activated at boot time. This selection is effective for boot time, password prompt, and ThinkPad Setup. • HDMI • DisplayPort • Display on dock HDMI is the HDMI connector on your computer. This option is not available when the computer is connected to a dock. DisplayPort is the Mini DisplayPort connector on your computer.
Table 6. Config menu items (continued) Menu item Submenu item Value Comments If you select Disabled, the system is not powered on nor resumed when the ac power adapter is attached. Intel Rapid Start Technology Disable Built-in Battery • Disabled • Enabled To use this feature, a special partition on the solid-state drive is required.
Table 6. Config menu items (continued) Menu item Submenu item Value Comments CIRA Timeout 0-255 Set the timeout option for CIRA connection to be established. Selectable second values are from 1 to 254. Note: The default value is 60 seconds. If you select 0, use 60 seconds as the default timeout value. If you select 255, the waiting time for establishing a connection is unlimited. Console Type • PC ANSI • VT100+ • PC-ANSI Select the console type for AMT.
Table 7. Security menu items (continued) Menu item Submenu item Value Comments goes ahead and loads the operating system. To prevent unauthorized access, set the user authentication on the operating system.
Table 7. Security menu items (continued) Menu item Submenu item Value Comments UEFI BIOS Update Option Flash BIOS Update by End-Users • Disabled If you select Enabled, all users can update the UEFI BIOS. If you select Disabled, only the person who knows the supervisor password can update the UEFI BIOS. Secure RollBack Prevention • Disabled (If OS Optimized Defaults is set as disabled.) • Enabled If you select Disabled, you can flash the older version UEFI BIOS.
Table 7. Security menu items (continued) Menu item Submenu item Value Comments Memory Protection Execution Prevention • Disabled Some computer viruses and worms cause memory buffers to overflow. By selecting Enabled you can protect your computer against attacks by such viruses and worms. If after choosing Enabled you find that a program does not run correctly, select Disabled and reset the setting.
Table 7. Security menu items (continued) Menu item Submenu item Value Comments Anti-Theft Intel AT Module Activation • Disabled Enable or disable the UEFI BIOS interface to activate the Intel AT module, which is an optional anti-theft service from Intel. • Enabled • Permanently Disabled Intel AT Suspend • Enter Note: If you set the Intel AT module activation to Permanently Disabled, you will be unable to enable this setting again.
• After you change the startup sequence, ensure that you select a correct device during a copy, a save, or a format operation. Otherwise your data might be erased or overwritten. • If you are using the BitLocker drive encryption, do not change the startup sequence. BitLocker drive encryption locks the computer from starting once detects the change of startup sequence. To change the startup sequence temporarily so that the computer starts from a desired drive, do the following: 1. Turn off the computer. 2.
Table 8. Startup menu items (continued) Menu item Value Comments Option Keys display • Disabled If you select Disabled, the “To interrupt normal startup, press Enter.” message is not displayed during the POST. • Enabled Boot Device List F12 Option • Disabled • Enabled Boot Order Lock • Disabled • Enabled If you select Enabled, the F12 key is recognized and the Boot Menu window is displayed. If you select Enabled, the boot priority order is locked for your future use.
Desktop Management Interface The UEFI BIOS of your computer supports an interface called System Management BIOS (SMBIOS) Reference Specification, version 2.7.1. SMBIOS provides information about the hardware components of your computer. It is the responsibility of the UEFI BIOS to provide information about itself and the devices on the system board. This specification documents the standards for getting access to this BIOS information.
Defining a Network Boot sequence When the computer wakes on LAN, the computer starts from the device as specified on the Network Boot menu, and then follow the boot order list on the Boot menu. To define a Network Boot sequence, do the following: 1. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 95. 2. Select Startup ➙ Network Boot. The boot device list is displayed. 3. Select a boot device to make it as the top boot priority. 4. Press F10.
Chapter 9. Preventing problems An important part of owning a ThinkPad notebook computer is maintenance. With proper care, you can avoid common problems. This chapter provides information that can help you keep your computer running smoothly.
• For suspected solid-state drive issues, refer to “Diagnosing problems” on page 115 and run a diagnostic test for the drive before you call the Customer Support Center. If your computer does not start up, download the files to create a bootable self-test medium from http://www.lenovo.com/hddtest. Run the test and record any messages or error codes. If the test returns any failing error codes or messages, call the Customer Support Center with the codes or messages and the computer in front of you.
Taking care of your computer Although your computer is designed to function reliably in normal work environments, you need to use common sense in handling it. By following the important tips in this topic, you will get the most use and enjoyment out of your computer. Be careful about where and how you work • Store packing materials safely out of the reach of children to prevent the risk of suffocation from plastic bags.
Take care in setting passwords • Remember your passwords. If you forget a supervisor or hard disk password, Lenovo will not reset it, and you might have to replace your system board or solid-state drive. Taking care of the fingerprint reader The following actions could damage the fingerprint reader or cause it not to work properly: • Scratching the surface of the fingerprint reader with a hard, pointed object. • Scraping the surface of the fingerprint reader with your fingernail or anything hard.
4. To remove any crumbs or dust from beneath the keys, you can use a camera blower with a brush or cool air from a hair dryer. Cleaning your computer display To clean the computer display, do the following: 1. Gently wipe the display with a dry, soft lint-free cloth. If you see a scratchlike mark on your display, it might be a stain transferred from the keyboard or the TrackPoint pointing stick when the cover was pressed from the outside. 2. Wipe or dust the stain gently with a soft, dry cloth. 3.
114 ThinkPad X1 Carbon User Guide
Chapter 10. Troubleshooting computer problems This chapter provides information on what to do if you experience a problem with your computer. • “Diagnosing problems” on page 115 • “Troubleshooting” on page 115 Diagnosing problems If you experience problems with your computer, use the Lenovo Solution Center program as a starting point for solving them. The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems.
• If you cannot turn off your computer by pressing and holding the power button, remove all sources of power from the computer and reset the system by inserting a straightened paper clip into the emergency-reset hole. To locate the reset hole, refer to “Bottom view” on page 7. After the computer is off, reconnect the ac power adapter and restart the computer by pressing the power button. If the computer does not turn on, continue with step 3. 2.
Solution: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replace, and the UUID needs to be reinstalled. Have the computer serviced. • Message: 0190: Critical low-battery error Solution: The computer turned off, because the battery is low. Connect the ac power adapter to the computer and charge the battery. • Message: 0191: System Security - Invalid remote change requested Solution: The system configuration change has failed. Confirm the operation and try again.
Note: If you are not sure whether you heard any beeps, turn off the computer by pressing and holding the power button for four seconds or more. Then turn on the computer and listen again. Solution: Make sure that: – The ac power adapter is connected to the computer and the power cord is plugged into a working electrical outlet. – The computer is turned on. (Press the power button again for confirmation.) – The brightness level of the screen is appropriately set.
1. Check for error messages during startup. Follow the appropriate corrective actions for power-on self-test (POST). See “Error messages” on page 116. 2. Verify that the latest UEFI BIOS for your model has been installed. 3. Verify the proper memory configuration and compatibility including the maximum memory size and the memory speed. 4. Run the Lenovo Solution Center program. See “Diagnosing problems” on page 115. Networking problems The following are the most common networking problems.
• Problem: My computer is a Gigabit Ethernet model, but the computer cannot connect to the network at 1000 Mbps. Instead, it connects at 100 Mbps. Solution: – Try another cable. – Make sure that the link partner is set to auto-negotiate. – Make sure that the switch is 802.3ab-compliant (gigabit over copper). A wireless LAN problem Problem: I cannot connect to the network using the built-in wireless network card. Solution: Make sure that: • Your wireless LAN driver is the latest version.
Problems with the keyboard and other pointing devices The following are the most common problems with keyboards and other pointing devices. TrackPoint pointing device problems • Problem: The pointer drifts when the computer is turned on or after it resumes normal operation. Solution: The pointer might drift when you are not using the TrackPoint pointing device during normal operation. This is a normal characteristic of the TrackPoint pointing device and is not a defect.
– If the problem persists, follow the solution for the following problem. • Problem: The screen is unreadable or distorted. Solution: Make sure that: – The display device driver is installed correctly. – The screen resolution and color quality are correctly set. – The monitor type is correct. To check these settings, do the following: 1. Right-click anywhere on the desktop, and click Personalize. 2. Click Display at the left. 3. Select Change display settings.
3. Refer to the manual shipped with the external monitor to check the resolutions and refresh rates that are supported. – If the external monitor supports the same resolution as the computer display or a higher resolution, view output on the external monitor or on both the external monitor and the computer display. – If the external monitor supports a lower resolution than the computer display, view output on the external monitor only.
and adjust the settings there. Usually the external monitor has buttons for access to the setup menu. For more information, see the documentation that comes with the monitor. Audio problems • Problem: Wave or MIDI sound does not play correctly. Solution: Make sure that the built-in audio device is configured correctly. 1. Open Control Panel. 2. Click Hardware and Sound. 3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4.
Solution: It is normal for the sliders to change position when certain sound programs are used. The programs are aware of the settings in the Volume Mixer window and are allowed to change the settings themselves. An example is the Windows Media Player. Usually the program has sliders available to control the sound from within the program. • Problem: The balance slider cannot completely mute one channel.
• Problem: The battery cannot be charged. Solution: You cannot charge the battery when it is too hot. Turn off the computer and allow it to cool to room temperature. After it cools, recharge the battery. If it still cannot be charged, call Lenovo Customer Service Center to have it serviced. An ac power adapter problem Problem: The ac power adapter is connected to the computer and the working electrical outlet, but the power adapter (power plug) icon is not displayed in the Windows notification area.
If you receive an error message while the operating system is loading the desktop configuration after the POST is completed, check the following items: 1. Go to the Lenovo Support Web site at http://www.lenovo.com/support and search for the error message. 2. Go to the Microsoft Knowledge Base homepage at http://support.microsoft.com/ and search for the error message. Sleep and hibernation problems • Problem: The computer enters sleep mode unexpectedly.
If your computer tries to enter sleep mode but the request is rejected, the device attached to the USB connector might have been disabled. If this occurs, do a hot-unplug-and-plug operation for the USB device. • Problem: The battery discharges slightly while the computer is in hibernation mode. Solution: If the wakeup function is enabled, the computer consumes small amount of power. This is not a defect. For more information, see “Power-saving modes” on page 38.
Solution: Make sure that: • The ThinkPad OneLink Dock is connected to power. • The computer is correctly connected to the ThinkPad OneLink Dock. Chapter 10.
130 ThinkPad X1 Carbon User Guide
Chapter 11. Getting support This chapter provides information about getting help and support from Lenovo. • “Before you contact Lenovo” on page 131 • “Getting help and service” on page 131 • “Purchasing additional services” on page 133 Before you contact Lenovo Often, you can solve your computer problems by referring to the information in the explanations of error codes, running diagnostic programs, or by consulting the Lenovo Web site. Registering your computer Register your computer with Lenovo.
Information about your computer and preinstalled software, if any, is available in the documentation that comes with your computer. That documentation includes printed books, online books, readme files, and help files. In addition, information about Lenovo products is available on the World Wide Web. Microsoft Service Packs are the latest software source for Windows product updates. They are available through Web download (connection charges might apply) or through disc.
• • • • • • Replacement or use of parts not manufactured for or by Lenovo or nonwarranted parts Identification of software problem sources Configuration of the UEFI BIOS as part of an installation or upgrade Changes, modifications, or upgrades to device drivers Installation and maintenance of network operating systems (NOS) Installation and maintenance of application programs For the terms and conditions of the Lenovo Limited Warranty that applies to your Lenovo hardware product, see “Warranty information
134 ThinkPad X1 Carbon User Guide
Appendix A. Regulatory Information Wireless related information Wireless interoperability The M.2 wireless LAN card is designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS), Complementary Code Keying (CCK), and/or Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: • The 802.11b/g Standard, 802.11a/b/g, 802.11n or 802.11ac draft 2.
• Find Me Profile • Immediate Alert Profile • Battery Status Profile Usage environment and your health Integrated wireless cards emit radio frequency electromagnetic energy like other radio devices. However, the level of energy emitted is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
3 Wireless WAN antenna (main) 4 Wireless LAN antenna (main) Locating wireless regulatory notices For more information about the wireless regulatory notices, refer to the Regulatory Notice shipped with the computer. If the computer is shipped without the Regulatory Notice, you can find it on the Web site at: http://www.lenovo.com/UserManual Certification related information The following table contains information of the product name, compliance ID, and machine types.
Responsible Party: Lenovo (United States) Incorporated 1009 Think Place - Building One Morrisville, NC 27560 Phone Number: 919-294-5900 Industry Canada Class B emission compliance statement CAN ICES-3(B)/NMB-3(B) European Union - Compliance to the Electromagnetic Compatibility Directive This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility.
Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit von Betriebsmitteln, EMVG vom 20. Juli 2007 (früher Gesetz über die elektromagnetische Verträglichkeit von Geräten), bzw. der EMV EG Richtlinie 2004/108/EC (früher 89/336/EWG), für Geräte der Klasse B. Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen.
140 ThinkPad X1 Carbon User Guide
Appendix B. WEEE and recycling statements Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: http://www.lenovo.
for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details, visit the Lenovo Web site at http://www.lenovo.com/recycling/japan. Pursuant to the Law for Promotion of Effective Utilization of Resources, the collecting and recycling of home-used computers and monitors by the manufacturer was begun on October 1, 2003.
Battery recycling information for Taiwan Battery recycling information for the European Union Notice: This mark applies only to countries within the European Union (EU). Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union.
144 ThinkPad X1 Carbon User Guide
Appendix C. Restriction of Hazardous Substances Directive (RoHS) European Union RoHS Lenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”). For more information about Lenovo progress on RoHS, go to: http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.
China RoHS 146 ThinkPad X1 Carbon User Guide
India RoHS RoHS compliant as per E-Waste (Management & Handling) Rules, 2011. Turkish RoHS The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (EEE). Ukraine RoHS Appendix C.
148 ThinkPad X1 Carbon User Guide
Appendix D. ENERGY STAR model information ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices. Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation.
3. In the Device Manager window, expand Network adapters. 4. Right-click your network adapter device, and click Properties. 5. Click the Power Management tab. 6. Clear the Allow this device to wake the computer check box. 7. Click OK.
Appendix E. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Access Connections Rescue and Recovery ThinkPad ThinkVantage TrackPoint UltraConnect Chrome is a trademark of Google Inc. Intel and Intel SpeedStep are trademarks of Intel Corporation in the U.S. and/or other countries. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
