ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Note: Before using this information and the product it supports, be sure to read and understand the following: • Safety, Warranty, and Setup Guide • Regulatory Notice • “Important safety information” on page vi • Appendix E “Notices” on page 151 The Safety, Warranty, and Setup Guide and the Regulatory Notice have been uploaded to the Web site. To refer to them, go to http://www.lenovo.com/UserManuals and follow the instructions on the screen. First Edition (October 2015) © Copyright Lenovo 2015.
Contents Read this first . . . . . . . . . . . . . . v Important safety information . . . . . . . . Conditions that require immediate action . Service and upgrades . . . . . . . . . Power cords and power adapters . . . . Extension cords and related devices . . . Plugs and outlets . . . . . . . . . . . Power supply statement . . . . . . . . External devices . . . . . . . . . . . General battery notice . . . . . . . . . Notice for built-in rechargeable battery . .
Using passwords. . . . . . . . . . . . . Typing passwords . . . . . . . . . . Power-on password . . . . . . . . . . Supervisor password . . . . . . . . . Hard disk passwords . . . . . . . . . Hard disk security . . . . . . . . . . . . Setting the security chip . . . . . . . . . . Using the fingerprint reader. . . . . . . . . Notice on deleting data from your storage drive. Using firewalls . . . . . . . . . . . . . . Protecting data against viruses . . . . . . . . . . . . . . . . . .
Japan notice for ac power cord . . Lenovo product service information Taiwan . . . . . . . . . . . . Eurasian compliance mark . . . . Brazil audio notice . . . . . . . . for . . . . . . 140 Recycling information for China . . . . . . . . . . . . . . . . . 140 140 140 Appendix C. Restriction of Hazardous Substances Directive (RoHS) . . . . 145 Appendix B. WEEE and recycling statements . . . . . . . . . . . . . Important WEEE information . . . . . . . . . Japan recycling statements . . . . . . . . .
iv ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Read this first Be sure to follow the important tips given here to get the most use and enjoyment out of your computer. Failure to do so might lead to discomfort or injury, or cause your computer to fail. Protect yourself from the heat that your computer generates. When your computer is turned on or the battery is charging, the base, the palm rest, and some other parts may become hot. The temperature they reach depends on the amount of system activity and the level of charge in the battery.
Protect your computer and data when moving it. Before moving a computer equipped with an internal storage drive, do one of the following: • Turn it off. • Put it in sleep mode. • Put it in hibernation mode. This will help to prevent damage to the computer, and possible loss of data. Handle your computer gently. Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects on your computer, display, or external devices. Carry your computer carefully.
Conditions that require immediate action Products can become damaged due to misuse or neglect. Some product damage is serious enough that the product should not be used again until it has been inspected and, if necessary, repaired by an authorized servicer. As with any electronic device, pay close attention to the product when it is turned on. On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you might hear sounds like popping, cracking or hissing.
Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety. CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Before replacing any CRUs, turn off the computer and wait three to five minutes to let the computer cool before opening the cover. Power cords and power adapters DANGER Use only the power cords and power adapters supplied by the product manufacturer.
Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should not exceed the power strip input rating. Consult an electrician for more information if you have questions about power loads, power requirements, and input ratings.
External devices CAUTION: Do not connect or disconnect any external device cables other than USB cable while the computer power is on; otherwise, you might damage your computer. To avoid possible damage to attached devices, wait at least five seconds after the computer is shut down to disconnect external devices. General battery notice DANGER Batteries supplied by Lenovo for use with your product have been tested for compatibility and should only be replaced with approved parts.
Notice for non-rechargeable coin-cell battery DANGER If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The battery contains a small amount of harmful substance. Do not heat to more than 100°C (212°F). The following statement applies to users in the state of California, U.S.A. California Perchlorate Information: Products containing manganese dioxide lithium coin-cell batteries may contain perchlorate. Perchlorate Material - special handling may apply, See www.dtsc.ca.
• Do not operate your computer inside furniture, as this might increase the risk of overheating. • Airflow temperatures into the computer should not exceed 35°C (95°F). Electrical current safety information DANGER Electric current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: • Do not use your computer during a lightning storm.
Liquid crystal display (LCD) notice CAUTION: The liquid crystal display (LCD) is made of glass, and rough handling or dropping the computer can cause the LCD to break. If the LCD breaks and the internal fluid gets into your eyes or on your hands, immediately wash the affected areas with water for at least 15 minutes; if any symptoms are present after washing, get medical care. Using headphones or earphones CAUTION: Excessive sound pressure from earphones and headphones can cause hearing loss.
xiv ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 1. Product overview This chapter provides information about the locations of connectors, locations of important product labels, computer features, specifications, operating environment, and preinstalled programs.
7 TrackPoint® buttons (available on some models) 8 TrackPoint pointing stick 9 10 Multi-touch screen 1 Windows® button Microphones The microphones capture sound and voice when used with a program capable of handling audio. 2 Camera Use the camera to take pictures or hold a video conference. For more information, see “Using the camera” on page 41. 3 Ambient light sensor The ambient light sensor detects the surrounding light conditions. Then the computer adjusts the screen brightness accordingly.
Figure 2. Right-side view 1 Power button 2 Volume-control buttons 3 USB 3.0 connectors 4 Mini DisplayPort connector 5 High-Definition Multimedia Interface (HDMI™) connector 6 Security-lock slot 1 Power button Press the power button to turn on the computer or put the computer into sleep mode. For information about how to turn off the computer, see “Frequently asked questions” on page 15.
4 Mini DisplayPort connector Use the mini DisplayPort® connector to connect your computer to a compatible projector, external monitor, or high-definition television. This compact connector enables a plug-and-play setup and supports adapters that can plug into Digital Visual Interface (DVI), Video Graphics Array (VGA), or High-Definition Multimedia Interface (HDMI™) connectors. The mini DisplayPort connector of your computer supports audio as well as video streaming.
2 OneLink+ connector Use the OneLink+ connector to connect to the ThinkPad OneLink+ Dock or to connect to the OneLink+ Ethernet Adapter. With the OneLink+ Ethernet Adapter, you can connect the computer to a local area network (LAN). DANGER To avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector on the OneLink+ Ethernet Adapter. You can only connect an Ethernet cable to this connector.
6 ThinkPad Pen Pro (available on some models) Depending on the model, your computer might have a ThinkPad Pen Pro installed. Use the ThinkPad Pen Pro to interact with your computer. For more information, see “ThinkPad Pen Pro” on page 20. Bottom view Note: Depending on the model, your computer might look different from the following illustration. Figure 4.
1 Micro-SIM-card slot (available on some models) 1 2 Fan louvers Micro-SIM-card slot If your computer supports the wireless Wide Area Network (wireless WAN) feature, a micro Subscriber Identification Module (SIM) card might be required to establish wireless WAN connections. Depending on the country or region of delivery, the micro SIM card might be already installed in this slot.
1 Fn Lock indicator The Fn Lock indicator shows the status of the Fn Lock function. For more information, see “Special keys” on page 29. 2 Speaker-mute indicator When the speaker-mute indicator is on, the speakers are muted. 3 Microphone-mute indicator When the microphone-mute indicator is on, the microphones are muted. 4 Camera-status indicator When the camera-status indicator is on, the camera is in use.
Machine type and model label The machine type and model label identifies your computer. When you contact Lenovo for help, the machine type and model information helps support technicians to identify your computer and provide faster service. The following illustration shows the location of the machine type and model of your computer.
compartment. The Certificate of Authenticity is your indication that the computer is licensed for a Windows 7 product and is preinstalled with a Windows 7 genuine version. In some cases, an earlier Windows version might be preinstalled under the terms of the Windows 7 Professional license downgrade rights. Printed on the Certificate of Authenticity is the Windows 7 version for which the computer is licensed and the Product ID.
Display • Multi-touch screen • Display size: 355.6 mm (14 inches) • Display resolution: 1920 x 1080 pixels or 2560 x 1440 pixels, depending on the model • Color display with the thin-film transistor (TFT) technology • Brightness control • Integrated camera and microphones on the computer display Keyboard • Function keys • Keyboard frame travel function • Six-row backlight keyboard • ThinkPad pointing device Interface • ac power connector • Always On USB 3.
Heat output • 45 W (154 Btu/hr) maximum • 65 W (222 Btu/hr) maximum Power source (ac power adapter) • Sine-wave input at 50-60 Hz • Input rating of the ac power adapter: 100-240 V ac, 50-60 Hz Operating environment Environment: • Maximum altitude without pressurization: 3048 m (10 000 ft) • Temperature – At altitudes up to 2438 m (8000 ft) – Operating: 5.0°C (41°F) to 35.0°C (95°F) – Storage: 5.0°C (41°F) to 43.
2. If the program is not displayed in the Start menu, click All apps to display all programs. 3. If you still do not find the program in the program list, search for the program in the search box. An introduction to Lenovo programs This topic provides a brief introduction to Lenovo programs. Depending on your computer model, some of the programs might not be available.
Lenovo Settings The Lenovo Settings program enables you to enhance your computing experience by turning your computer into a portable hotspot, configuring camera and audio settings, optimizing your power settings, and creating and managing multiple network profiles. Lenovo Solution Center The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems.
Chapter 2. Using your computer This chapter provides information on using some of the computer components.
How to turn off my computer? Open the Start menu, click the power icon , and then click Shut down. How do I access Control Panel? • Right-click the Start button, then click Control Panel. How do I use battery power more effectively when I am on the go? • To conserve power, or to suspend operation without exiting applications or saving files, see “Power-saving modes” on page 37. • To achieve the best balance between performance and power saving, create and apply power plans.
Using the special buttons The computer is equipped with special buttons as shown in the following illustration. You can control some functions of your computer through the special buttons, without the use of the keyboard. 1 Power button: Press the power button to turn on the computer. 2 Volume-up button: Press the volume-up button to increase the speaker volume. 3 Volume-down button: Press the volume-down button to decrease the speaker volume.
Touch gesture (touch models only) Description Touch: Tap. Mouse action: Click. Function: Open an app or perform an action on an open app, such as Copy, Save, and Delete, depending on the app. Touch: Tap and hold. Mouse action: Right-click. Function: Open a menu with multiple options. Touch: Slide. Mouse action: Scroll the mouse wheel, move the scroll bar, or click the scroll arrow. Function: Scroll through items, such as lists, pages, and photos. Touch: Drag an item to the desired location.
Touch gesture (touch models only) Description Touch: Swipe in from the left edge. Mouse action: Click the task-view icon on the taskbar. Function: View all your open windows in task view. Touch: Swipe in from the bottom to top for full-screened app. Mouse action: Move your cursor to the Windows notification area at the bottom of the screen. Function: View the taskbar. Note: The full screen feature is available only on some apps. To open an app in full screen, click on the title bar.
Tips on using the multi-touch screen • The multi-touch screen is a glass panel covered with a plastic film. Do not apply pressure or place any metallic object on the screen, which might damage the touch panel or cause it to malfunction. • Do not use fingernails, gloved fingers, or inanimate objects for input on the screen. • Regularly calibrate the accuracy of the finger input to avoid a discrepancy. Tips on cleaning the multi-touch screen • Turn off the computer before cleaning the multi-touch screen.
You can perform the following operations with the ThinkPad Pen Pro: • To click or make a selection, tap the display once with the pen. • To double-click, tap twice without pausing. • To right-click, tap the tip 1 on the display and hold the pen there for one second, or press and hold the click button 3 while tapping the tip 1 on the display. • To erase ink, press and hold the eraser button 2 , tap the tip 1 on the display, and drag the pen across the ink you want to erase.
Charging the ThinkPad Pen Pro To charge the pen, insert the pen slightly into the slot until it snaps into position. The pen will be fully charged in about five minutes. The following illustration is an example. You can insert the pen into the slot for charging no matter the computer is in the notebook mode, stand mode, tent mode, or tablet mode. Note: Ensure that your computer is on or in sleep mode. Otherwise, the pen will not be charged.
Display angle for each operating mode The angle between the front of the computer display and the keyboard is different in each operating mode. The following table lists the angle range for each operating mode. Table 1.
In the notebook mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automatically enabled. Stand mode You can use your computer in the stand mode in scenarios that require limited interaction with the screen, such as viewing photos and playing videos. Attention: Do not rotate the computer display with too much force, otherwise the computer display or hinges might get damaged. Do not apply too much force to the upper-right or upper-left corner of the computer display.
2. Position your computer as shown. Your computer is now in the stand mode. In the stand mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automatically disabled. In the stand mode, you can use the special buttons to control your computer. For instructions on how to use the special buttons, refer to “Using the tablet buttons” on page 17.
If your computer is in the stand mode, do the following to turn the computer from the stand mode into the tablet mode: Note: Depending on the model, your computer might look different from the illustrations in this topic. 1. Position your computer as shown and slowly rotate the computer display clockwise. 2. Position your computer as shown. Your computer is now in the tablet mode. By default, the autorotate feature is enabled.
If your computer is in the tablet mode, do the following to turn the computer from the tablet mode into the tent mode: Note: Depending on the model, your computer might look different from the illustrations in this topic. 1. Slowly rotate your computer display anticlockwise to any angle within a range of 190 degrees to 359 degrees. Note: The degrees refers to the angle degrees between the LCD and the keyboard. 2. Position your computer as shown. Your computer is now in the tent mode.
• In the notebook mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automatically enabled. In the stand mode, tablet mode, and tent mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automatically disabled. The following illustration shows the location of the keyboard. Behavior of the keyboard The frame of the keyboard travels upward when you rotate the computer display from 190 degrees to 360 degrees.
Customizing the keyboard You can customize the keyboard to achieve the extended functions of the keyboard. To customize the keyboard, do the following: 1. Go to Control Panel. 2. Click Hardware and Sound ➙ Device Manager ➙ Keyboards ➙ Standard PS/2 keyboard and then follow the instructions on the screen. Special keys The keyboard has several special keys, which consist of the function keys 1 , the Fn key 2 , and the Windows key 3 .
1 2 Function keys Fn key You can configure the Fn key and function keys in the Keyboard Properties window by doing the following: 1. Go to Control Panel. Change the view of Control Panel from Category to Large icons or Small icons. 2. Click Keyboard. In the Keyboard Properties window, click the Fn and function keys or ThinkPad F1–F12 keys tab. 3. Select the options of your preference. • + : Press Fn+Esc to disable or enable the Fn Lock function.
You can temporarily change the computer display brightness by pressing the two keys. To change the default brightness level, right-click the battery-status icon in the Windows notification area. Then click Adjust screen brightness and make changes as desired. : Switches the display output location between the computer display and an external monitor. • Note: You also can press Windows+P to switch between the computer display and an external monitor.
The ThinkPad pointing device consists of the following two devices: 1 2 TrackPoint pointing device Trackpad By default, both the TrackPoint pointing device and the trackpad are active with the touch gestures enabled. To change the settings, see “Customizing the ThinkPad pointing device” on page 34. TrackPoint pointing device The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as pointing, clicking, and scrolling.
• Point Use the TrackPoint pointing stick 1 to move the pointer on the screen. To use the pointing stick, apply pressure to the pointing-stick nonslip cap in any direction parallel to the keyboard. The pointer moves accordingly but the pointing stick itself does not move. The speed at which the pointer moves depends on the amount of pressure you apply to the pointing stick. • Left-click Press the left-click button 2 to select or open an item.
With the trackpad, you also can perform a variety of touch gestures. For information about using the touch gestures, see “Trackpad touch gestures” on page 34. Trackpad touch gestures The entire trackpad surface is sensitive to finger touch and movement. You can use the trackpad to perform the same point and click actions as you would using a traditional mouse. You also can use the trackpad to perform a variety of touch gestures.
Replacing the cap of the TrackPoint pointing stick The cap 1 on the end of the TrackPoint pointing stick is removable. After you use the cap for a period of time, you might consider replacing the cap with a new one. Note: Ensure that you use a cap with grooves a as shown in the following illustration. Power management When you use your computer away from electrical outlets, you depend on battery power to keep your computer running. Different computer components consume power at different rates.
• ac power adapter: Converts ac power for notebook computer use. • Power cord: Connects the ac outlet and the ac power adapter. Connecting to ac power To connect the computer to ac power, do the following: Attention: Using an improper power cord might cause severe damage to your computer. Note: Ensure that you perform the actions in the order in which they are listed. 1. Connect the power cord to the ac power adapter. 2. Connect the ac power adapter to the power connector of the computer. 3.
Managing the battery power To achieve the best balance between performance and power saving, adjust your power plan settings. To access power plan settings, do the following: 1. Click the battery-status icon from the Windows notification area. 2. Click More power options ➙ Change plan settings. 3. Follow the instructions on the screen. For more information, refer to the help information system of the program. Power-saving modes There are several modes that you can use at any time to conserve power.
DANGER To avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector on the OneLink+ Ethernet Adapter or the ThinkPad OneLink+ Dock. Wireless connections Wireless connection is the transfer of data without the use of cables but by means of radio waves only. In the Airplane mode, all wireless features are disabled. To disable the Airplane mode, open the Start menu and then click Settings.
Some ThinkPad notebook computers come with a built-in wireless WAN card integrated with some wireless WAN technologies, such as 1xEV-DO, HSPA, 3G, GPRS, or LTE. By using the built-in wireless WAN card and the configuration utility that comes with your computer, you can establish wireless WAN connections and monitor the connection status. Note: The wireless WAN service is provided by authorized service providers in some countries.
Connecting an external display You can use either a wired display or a wireless display. The wired display can be connected to the HDMI connector by a cable. The wireless display can be added through the Wi-Di or Miracast function. • Connecting a wired display Note: When you connect an external monitor, a video interface cable with a ferrite core is required. 1. Connect the external display to an appropriate video connector on your computer. 2. Connect the external display to an electrical outlet. 3.
1. Right-click on the desktop and select Display settings. 2. Select the display that you want to configure. 3. Change display settings as desired. Using audio features Your computer is equipped with the following: • Microphones Note: The left microphone and right microphone automatically switch between each other when the computer screen rotates. • Speakers Note: The left speaker and right speaker automatically switch between each other when the computer screen rotates. • Combo audio connector, 3.5 mm (0.
You also can use the integrated camera with other programs that provide features such as photographing, video capturing, and video conferencing. To use the camera with other programs, open one of the programs and start the photographing, video capturing, or video conferencing function. Then, the camera starts automatically and the green camera-in-use indicator turns on. For more information about using the camera with a program, refer to the help information system of the program.
• Before removing a card, stop the card first. Otherwise, data on the card might get damaged or lost. • Do not remove a card while the computer is in sleep mode or hibernation mode. Otherwise, the system might not respond when you try to resume operation. To remove a card, do the following: 1. Click the triangular icon on the windows notification area to show hidden icons. Then, right-click the Safely Remove Hardware and Eject Media icon. 2. Select the item you want to remove to stop the card. 3.
44 ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 3. Enhancing your computer This chapter provides instructions on how to use hardware devices to expand your computer capabilities. • “Finding ThinkPad options” on page 45 • “ThinkPad OneLink+ Dock” on page 45 Finding ThinkPad options If you want to expand the capabilities of your computer, Lenovo has a number of hardware accessories and upgrades to meet your needs.
4 Always On USB connector: By default, the Always On USB connector enables you to charge some mobile digital devices and smartphones when the dock is in the following situations: • When the dock is in sleep or hibernation mode • When the dock is turned off For more information, refer to the documentation that comes with the dock. 5 Power button: The power button on the dock functions the same as the one on the computer.
Chapter 4. You and your computer This chapter provides information about accessibility, comfort, and traveling with your computer. • “Accessibility and comfort” on page 47 • “Traveling with your computer” on page 51 Accessibility and comfort Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform.
Chair: Use a chair that gives you good back support and seat height adjustment. Use chair adjustments to best suit your desired posture. Arm and hand position: If available, use chair arm rests or an area on your working surface to provide weight support for your arms. Keep your forearms, wrists, and hands in a relaxed and neutral (horizontal) position. Type with a soft touch without pounding the keys. Leg position: Keep your thighs parallel to the floor and your feet flat on the floor or on a footrest.
2. Click Control Panel ➙ Ease of Access ➙ Ease of Access Center. 3. Follow the instructions on the screen. Ease of Access Center mainly includes the following tools: • Magnifier Magnifier is a useful utility that enlarges the entire screen or part of the screen so that you can see the words and images better. • Narrator Narrator is a screen reader that reads what is displayed on the screen aloud and describes events like error messages.
Screen resolution You can make the text and images on your screen easier to read by adjusting the screen resolution of your computer. To adjust the screen resolution, do the following: 1. Right-click an empty area of the desktop and select Display settings ➙ Advanced display settings. 2. Select your preferred setting under Resolution. Note: Setting a resolution too low might prevent some items from fitting on the screen.
that visually impaired users can read the documentation through a screen reader. Each image in the documentation also includes adequate alternative text so that visually impaired users can understand the image when they use a screen reader. Traveling with your computer This topic provides information to help you work with your computer when you are traveling. Travel tips Use the following travel tips to travel more confidently and efficiently with your computer.
52 ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 5. Security This chapter provides information about how to protect your computer from theft and unauthorized use.
4. Depending on your need, do one of the following: • To set a password, do the following: a. In the Enter New Password field, type a desired password and press Enter. b. In the Confirm New Password field, retype the password and press Enter. • To change a password, do the following: a. In the Enter Current Password field, type the current power-on password and press Enter. b.
– Internal Network Option ROM – Security mode Notes: • The system administrator can set the same supervisor password on many ThinkPad notebook computers to make administration easier. • When Lock UEFI BIOS Settings option is enabled, all BIOS settings cannot be changed. To change the settings, a supervisor password is required. Setting, changing, or removing a supervisor password Before you start, print these instructions. Only a system administrator can set, change, or remove a supervisor password.
The master hard disk password also requires a user hard disk password. The master hard disk password is usually set and used by a system administrator. It enables the administrator to access any hard disk drive or hybrid drive in a system like a master key. The administrator sets the master password; then assigns a user password for each computer in the network. The user can then change the user password as desired, but the administrator still can get access by using the master password.
Note: The hard disk password cannot be removed in User HDP mode. – If you select Master HDP mode, follow the following steps to change the master hard disk password: 1. Type the current master hard disk password in the Enter Current Password field and press Enter. 2. Type the new master hard disk password in the Enter New Password field and press Enter; then retype the new password you just entered in the Confirm New Password field and press Enter. 3. A Setup Notice window is displayed.
• If a Disk Encryption hard disk drive, an Encryption solid-state drive, or a Disk Encryption hybrid drive is installed in your computer, be sure to protect the contents of your computer memory from unauthorized access by use of drive encryption software, such as Microsoft Windows BitLocker® Drive Encryption. Refer to “Using Windows BitLocker Drive Encryption” on page 58. • Before you dispose of, sell, or hand over your computer, be sure to delete data stored on it.
To set an item on the Security Chip submenu, do the following: 1. Turn off your computer. Wait for about five seconds, and then turn on the computer again. 2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program. 3. Select Security ➙ Security Chip by using the directional keys. 4. Press Enter. The Security Chip submenu opens. 5. Move to an item you want to set by using the directional keys. When the item is highlighted, press Enter. 6. Set other items that you want to set. 7.
2. Follow the on-screen instructions to complete several scans until the enrollment is completed. Indicator behavior of the fingerprint reader Indicator behavior Description 1 Off The fingerprint reader is not ready for tapping. 2 Solid green The fingerprint reader is ready for tapping. 3 Amber, blinking The fingerprint cannot be authenticated.
password canceled. If you forget your hard disk password, Lenovo cannot reset your password or recover data from the storage drive. You must take your computer to a Lenovo authorized servicer or a marketing representative to have the storage drive replaced. Proof of purchase is required, and a fee will be charged for parts and service. Setting the fingerprint reader You can change some advanced settings in the ThinkPad Setup program, see “Using the ThinkPad Setup program” on page 66.
Notice on deleting data from your storage drive Some of the data stored on storage drive might be sensitive. Handing your computer over to someone else without deleting the installed software, such as operating systems and application software, might even violate license agreements. Be sure to delete data stored on the storage drive before you dispose of, sell, or hand over your computer.
For more information about how to use your antivirus software, refer to the help information system of your antivirus software. Chapter 5.
64 ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 6. Advanced configuration While it is important to protect files, data, and settings that are on the storage drive, you also might need to install a new operating system, install new device drivers, update your system UEFI BIOS, or recover preinstalled software. This information will help you handle your computer with proper care and keep it in top working shape.
Country or region Code Country or region Code China SC Netherlands NL Denmark DK Norway NO Finland FI Spain SP France FR Sweden SV Germany GR Taiwan and Hong Kong TC Italy IT United States US Japan JP Installing device drivers Device driver is the program that operates a particular hardware device of the computer. If a device does not perform well or you install a new device, you need to install or update the corresponding device driver.
Main menu When you enter the ThinkPad Setup program, you will first see the Main menu as follows: • UEFI BIOS Version • UEFI BIOS Date • Embedded Controller Version • ME Firmware Version • Machine Type Model • System-unit serial number • System board serial number • Asset Tag • CPU Type • CPU Speed • Installed memory • UUID • MAC Address (Internal LAN) • Preinstalled OS License • UEFI Secure Boot • OA3 ID • OA2 Config menu To change the configuration of your computer, select Config tab from the ThinkPad Se
Table 3. Config menu items (continued) Menu item Submenu item Selection Comments • The Wake on LAN function does not work when a hard disk password is set. UEFI IPv4 Network Stack (for UEFI Only boot mode or Both with UEFI first) UEFI IPv6 Network Stack (for UEFI Only boot mode or Both with UEFI first) UEFI PXE Boot Priority (for Both with UEFI first boot mode, and IPv6 and IPv4 stacks are both enabled.
Table 3. Config menu items (continued) Menu item Submenu item Selection Comments hibernation mode or is turned off without connecting to ac power. Keyboard/Mouse Fn and Ctrl Key swap • Disabled • Enabled Enable exchanges of Fn and Ctrl key action at the bottom-left of the keyboard. Disabled: Fn key and Ctrl key behavior is as printed on the keyboard. Enabled: Fn key works as Ctrl key. Ctrl key works as Fn key.
Table 3. Config menu items (continued) Menu item Submenu item Total Graphics Memory Selection Comments • Display on dock single display output. This option chooses which one is prioritized. • 256 MB Allocate the total memory which Intel internal graphics shares. • 512 MB Note: If you select 512 MB, the maximum usable memory might be reduced on 32–bit operating system.
Table 3. Config menu items (continued) Menu item Submenu item Selection Comments Disable Built-in Battery Use this feature to temporarily disable the built-in battery. The system will be automatically powered off after you select this item. Then the computer is ready to be serviced. Note: The ac power adapter must be disconnected to perform this operation. The built-in battery will be automatically enabled when the ac power adapter is reconnected.
Table 3. Config menu items (continued) Menu item Submenu item Selection Comments If you select 255, the waiting time for establishing a connection is unlimited. Console Type • PC ANSI • VT100+ • PC-ANSI • VT-UTF8 Select the console type for AMT. Note: This console type should match the Intel AMT remote console. Date and Time menu To change the date or time of your computer, select the Date/Time tab from the ThinkPad Setup menu. Then do the following: 1.
Table 4. Security menu items (continued) Menu item Submenu item Selection Comments the user authentication on the operating system. Password at Restart • Disabled • Enabled Password at Boot Device List • Disabled • Enabled If you select and enable Password at restart, a password prompt will be displayed when you restart the computer. If you select Disabled, no password prompt will be displayed; the computer goes ahead and loads the operating system.
Table 4. Security menu items (continued) Menu item Submenu item Selection Comments Security Mode • Normal If you select Normal, the Power-On Password or Supervisor Password must be entered to boot a system when no fingerprint is authenticated. If you select High, the Supervisor password must be entered to boot a system when no fingerprint is authenticated. Power-On Password is not accepted.
Table 4. Security menu items (continued) Menu item Submenu item (If Security Chip Selection is Intel PTT) Selection • Disabled Comments If you select Enabled, the security chip will be functional. If you select Disabled, the Security Chip option will be hidden and the security chip will not be functional.
Table 4. Security menu items (continued) Menu item Submenu item Selection Comments If you select Disabled, no user confirmation screen will be displayed when provisioning the security chip. Physical Presence for Clear • Disabled • Enabled This option enables or disables confirmation of a user physical presence when clearing the security chip. If you select Enabled, a user confirmation screen will be displayed when clearing the security chip.
Table 4. Security menu items (continued) Menu item Submenu item Selection Comments Virtualization Intel(R) Virtualization Technology • Disabled If you select Enabled, a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel Virtualization Technology. Intel(R) VT-d Feature • Disabled • Enabled • Enabled Intel VT-d stands for Intel Virtualization Technology for directed I/O.
Table 4. Security menu items (continued) Menu item Submenu item Selection Comments Anti-Theft Computrace • Enabled Enable or disable the UEFI BIOS interface to activate the computrace feature. The computrace feature enables you to track and secure your computer. • Disabled • Permanently Disabled Note: If you set the Computrace item as Permanently Disabled, it cannot be enabled again. Secure Boot Secure Boot • Disabled • Enabled Enable or disable the Secure Boot feature.
Table 4. Security menu items (continued) Menu item Submenu item Selection Comments the original signature databases including certificate for Windows 10 operating system. Clear All Secure Boot Keys This option is used to clear all keys and certificates in Secure Boot databases. You can install your own keys and certificates after selecting this option. Startup menu To change the startup settings of your computer, select the Startup tab from the ThinkPad Setup menu.
Table 5. Startup menu items (continued) Menu item Selection Comments UEFI/Legacy Boot • Both Select system boot capability. • UEFI Only • Both: The system boots by the following UEFI/Legacy Boot Priority setting. • Legacy Only UEFI/Legacy Boot Priority • Legacy First • UEFI First CSM Support • No • Yes • UEFI Only: The system boots from the UEFI enabled operating system. • Legacy Only: The system boots from any operating system other than the UEFI enabled one.
The following submenu items are displayed: • Exit Saving Changes: Save the changes and restart the computer. • Exit Discarding Changes: Discard the changes and restart the computer. Notes: The changes of the following submenu items will not be discarded and can be reset in ThinkPad Setup menu: – Date & Time – Supervisor password – Power-on password – Hard disk password • Load Setup Defaults: Restore to the factory default settings.
This manageability, known as Total Cost of Ownership (TCO), enables you to remotely operate client computers in the same way as you operate your own computer, such as turning on a client computer, formatting a hard disk drive or hybrid drive, and installing a program. Once the computer is configured and operational, you can manage it by using the software and the manageability features that are already integrated into the client computer and the network.
Chapter 7. Preventing problems An important part of owning a ThinkPad notebook computer is maintenance. With proper care, you can avoid common problems. The chapter provides information that can help you keep your computer running smoothly.
– If your computer uses discs as the recovery media, do not remove the disc from the drive until prompted to do so. • For suspected hard disk drive or hybrid drive issues, refer to “Diagnosing problems” on page 89 and run a diagnostic test for the drive before you call the Customer Support Center. If your computer does not start up, download the files to create a bootable self-test medium from http://www.lenovo.com/hddtest. Run the test and record any messages or error codes.
For more information about how to use the System Update program, refer to the help information system of the program. Taking care of your computer Although your computer is designed to function reliably in normal work environments, you need to use common sense in handling it. By following the important tips in this topic, you will get the most use and enjoyment out of your computer.
• Before you install a memory card such as an SD card, SDHC card, SDXC card, and a MultiMediaCard, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. Static electricity could damage the device. • When transferring data to or from a flash media card, such as an SD card, do not put your computer in sleep or hibernation mode before the data transfer is complete; otherwise, your data could become damaged.
1. Gently wipe the display with a dry, soft lint-free cloth. If you see a scratchlike mark on your display, it might be a stain transferred from the keyboard or the TrackPoint pointing stick when the cover was pressed from the outside. 2. Wipe or dust the stain gently with a soft, dry cloth. 3. If the stain remains, moisten a soft, lint-free cloth with water or a 50-50 mixture of isopropyl alcohol and water that does not contain impurities.
88 ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 8. Troubleshooting computer problems This chapter provides information on what to do if you experience a problem with your computer. This chapter contains the following topics: • “Diagnosing problems” on page 89 • “Troubleshooting” on page 89 Diagnosing problems If you experience problems with your computer, use the Lenovo Solution Center program as a starting point for solving them. The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems.
2. Remove the ac power adapter from the computer, and reset the system by inserting a straightened paper clip into the emergency-reset hole. To locate the reset hole, refer to “Bottom view” on page 6. Reattach the ac power adapter. Notes: a. If the computer does not turn on, continue with step 3. b. If the computer starts with ac power but does not start when ac power is disconnected, call the Customer Support Center for support. Go to http://www.lenovo.
Solution: The EEPROM checksum is not correct (block # 4 and 5). Reset the block # 0 and 1, for example the box Serial Number, and/or block # 4 and 5, for example the UUID. • Message: 0190: Critical low-battery error. Solution: The computer turns off, because the battery is low. Connect the ac power adapter to the computer and charge the battery. • Message: 0191: System Security - Invalid remote change requested.
• Message: Fan error Solution: Cooling fan has failed. Have the computer serviced. • Message: Thermal sensing error Solution: The thermal sensor is not functioning correctly. Shut down the computer immediately and have the computer serviced. Beep errors Table 6. Beep errors Beeps Solution One short beep, pause, three short beeps, pause, three more short beeps, pause, and one short beep (1-3-3-1 beeps) Memory problem. Shut down the computer immediately and have the computer serviced.
– The cable is installed correctly. The network cable must be securely connected to the RJ45 connector of the supported dock. The maximum allowable distance from the computer to the hub is 100 meters (328 feet). If the cable is connected and the distance is within the limit but the problem persists, try a different cable. – You are using the correct device driver. To install the correct driver, do the following: 1. Open Control Panel and click Hardware and Sound ➙ Device Manager.
Bluetooth problems Note: Check your connection anytime and make sure that no other Bluetooth-enabled device is searching for the device to which you want to connect. Simultaneous searching is not allowed in the Bluetooth connection. • Problem: Sound does not come from the Bluetooth headset/headphone but comes from the local speaker even though the Bluetooth headset/headphone is connected using a Headset profile or AV profile. Solution: Do the following: 1.
Solution: Ensure that the external numeric keypad is correctly connected to the computer. Problems with the display and multimedia devices This topic includes the most common problems with displays and multimedia devices, including the computer display, the external monitor, and audio devices. Computer screen problems • Problem: The screen is blank. Solution: Do the following: – Press the display mode-switching key to bring up the image.
If these items are correctly set, and the screen remains blank, have the computer serviced. • Problem: When I turn on the computer, only a white pointer is displayed on a blank screen. Solution: If you have modified a partition on your hard disk drive or hybrid drive by using partition software, information about that partition, or the master boot record might have been destroyed. 1. Turn off the computer, and then turn it on again. 2.
• Problem: Wrong characters are displayed on the screen. Solution: Did you follow the correct procedure when installing the operating system or application program? If you did, have the external monitor serviced. • Problem: The Extend desktop function does not work. Solution: Enable the Extend desktop function by doing the following: 1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical outlet. 2. Turn on the external monitor and the computer. 3.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4. Double-click Sound, video and game controllers. 5. Make sure that the Conexant HD Audio driver is enabled and configured correctly. • Problem: Recordings made using the microphone input are not loud enough. Solution: Ensure that the Microphone Boost function is turned on and set by doing the following: 1. Open Control Panel. 2. Click Hardware and Sound. 3. Click Sound. 4.
3. Look at the tabs of playback devices. If you have attached a headphone, the headphone will be automatically set as the default device, and the headphone tab icon will be checked. 4. To set a different device as the default, click the speaker tab. Click the Set Default Device drop down list box. Select Set Default Device. That speaker tab icon will now have a check mark. 5. Play any sound by use of a music program such as Windows Media Player. Ensure that sound comes from the speakers.
3. Reconnect the ac power adapter, then turn on the computer. 4. If the power adapter icon still is not displayed on the windows notification area and the system-status indicator does not blink, have the ac power adapter and your computer serviced. Note: To display the power adapter (power plug) icon, click Show hidden icons on the windows notification area. Power problems Print these instructions now and keep the instructions with your computer for reference later.
• Problem: The computer enters sleep mode (the sleep indicator turns on) immediately after the power-on self-test. Solution: Ensure that: – The battery is charged. – The operating temperature is within the acceptable range. Refer to “Operating environment” on page 12. If the battery is charged and the temperature is within range, have the computer serviced. • Problem: A critical low-battery error occurs, and the computer immediately turns off. Solution: The battery power is getting low.
hard disk drive or hybrid drive problems • Problem: The hard disk drive or hybrid drive makes a rattling noise intermittently. Solution: The rattling noise might be heard: – When the hard disk drive or hybrid drive begins or finishes getting access to data. – When you carry the hard disk drive or hybrid drive. – When you carry your computer. This is a normal characteristic of a hard disk drive or hybrid drive and is not a defect. • Problem: The hard disk drive or hybrid drive does not work.
A USB problem Problem: A device connected to the USB connector does not work. Solution: Open the Device Manager window. Ensure that the USB device setup is correct, and that the assignment of computer resource and the installation of the device driver are correct. To open the Device Manager window, go to Control Panel and click Hardware and Sound ➙ Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
104 ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Chapter 9. Recovery overview This chapter provides information about the recovery solutions provided by Lenovo. Recovery overview for the Windows 10 operating system The Windows recovery programs enable you to reset your computer or use advanced startup options. It is recommended that you create a recovery USB drive as early as possible. Store the recovery USB drive as a backup or replacement for the Windows recovery programs. For more information, see “Creating and using a recovery USB drive” on page 106.
Creating and using a recovery USB drive You can create a recovery USB drive as a backup for the Windows recovery programs. With the recovery USB drive, you can troubleshoot and fix the problems even if the preinstalled Windows recovery programs are damaged. Creating a recovery USB drive The USB drive that you use to create the recovery USB drive must be at least 16 GB of storage. The actual USB capacity that is required depends on the size of the recovery image.
Chapter 10. Replacing devices This chapter provides instructions on how to install or replace hardware for your computer.
5. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off automatically. Wait three to five minutes to let the computer cool. Installing or replacing the micro SIM card Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. If your computer supports wireless WAN connections, your computer might require a micro SIM card to establish wireless WAN connections.
4. Gently take the micro SIM card out of the tray. 5. Install a new micro SIM card into the micro-SIM-card tray. 6. Insert the tray into the computer. 7. Reconnect the ac power adapter and all cables. Replacing the keyboard Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. Removing the keyboard To remove the keyboard, do the following: Note: Your computer might look different from the illustrations in this topic. 1.
3. Close the computer display and turn the computer over. 4. Remove the screws that secure the keyboard. 5. Push hard in the direction shown by the arrows to unlatch the front edge of the keyboard (the edge that is close to you).
6. Pivot the keyboard slightly upward as shown by arrow 1 . Then turn the keyboard over as shown by arrow 2 . 7. Detach the connectors and remove the keyboard. Installing the new keyboard To install the new keyboard, do the following: Chapter 10.
1. Attach the connectors and then turn the keyboard over. 2. Insert the keyboard as shown by the arrows. Ensure that the rear edge of the keyboard (the edge that is close to the computer display) is under the frame of the keyboard bezel.
3. Slide the keyboard in the direction shown by the arrows until the latches of the keyboard are hidden under the keyboard bezel. 4. Turn the computer over and reinstall the screws. 5. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the base cover assembly Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. To replace the base cover assembly, do the following: 1.
3. Remove the screw caps 1 and the screw 2 . 4. Loosen the rest of the screws that secure the base cover assembly.
5. Pry up the latches and then remove the base cover assembly. 6. Install the new base cover assembly in place. Chapter 10.
7. Tighten the screws to secure the base cover assembly. 8. Resinstall the screw 1 and the screw caps 2 . 9. Turn the computer over again. Connect the ac power adapter and all cables. Replacing the memory module Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. Increasing memory capacity is an effective way to make programs run faster.
Replacing the memory module To replace the memory module, do the following: 1. Disable the built-in battery. See “Disabling the built-in battery” on page 107. 2. Close the computer display, and turn the computer over. 3. Remove the base cover assembly. See “Replacing the base cover assembly” on page 113. 4. Open the latches on both sides of the memory slot at the same time 1 , and then remove the memory module 2 . 5.
Replacing the internal storage drive Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. Attention: The internal storage drive (hard disk drive, solid-state drive, or hybrid drive) is sensitive. Incorrect handling can cause damage and permanent loss of data. Observe the following guidelines: • Replace the storage drive only if you upgrade it or have it repaired.
5. Take the drive tab and lift the drive. Then take the drive out of the drive bay. 6. Disconnect the drive cable from the storage drive. 7. Reconnect the drive cable to the new storage drive. Chapter 10.
8. Place the new drive into the drive bay. Note: Ensure that the tiny tabs a on the storage drive bracket are correctly secured by the corresponding hooks of the storage-drive retaining frame. 9. Attach the connector. 10. Reinstall the base cover assembly. 11. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the button I/O card Before you start, print these instructions. Read the important safety information first.
4. Detach the connector. 5. Remove the button I/O card as shown. 6. Insert the new button I/O card. Chapter 10.
7. Attach the connector. 8. Reinstall the base cover assembly. 9. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the ac power card Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
4. Disconnect the cable from the ac power card. 5. Remove the screws that secure the ac power card. Chapter 10.
6. Remove the dc-in bracket. 7. Remove the ac power card.
8. Install the new ac power card in place. 9. Install the dc-in bracket in place. Chapter 10.
10. Reinstall the screws to secure the ac power card. 11. Reconnect the cable. 12. Reinstall the base cover assembly. 13. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the speaker assembly Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
3. Remove the base cover assembly. See “Replacing the base cover assembly” on page 113. 4. Remove the button I/O card. See “Replacing the button I/O card” on page 120. 5. Detach the connectors. 6. Remove the screws. Then remove the speaker assembly. Chapter 10.
7. Install the new speaker assembly in place. Then install the screws to secure the speaker assembly. 8. Reattach the connectors. 9. Reinstall the button I/O card. See “Replacing the button I/O card” on page 120. 10. Reinstall the base cover assembly. 11. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the coin-cell battery Before you start, print these instructions. Read the important safety information first.
DANGER If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The coin-cell battery contains a small amount of harmful substances. To avoid possible injury: • Replace only with a battery of the type recommended by Lenovo. • Keep the battery away from fire. • Do not expose it to excessive heat. • Do not expose it to water or rain. • Do not short-circuit it. • Do not drop, crush, puncture the battery, or make it subject to strong forces.
7. Turn the computer over again. Connect the ac power adapter and all cables to the computer.
Chapter 11. Getting support This chapter provides information about getting help and support from Lenovo. • “Before you contact Lenovo” on page 131 • “Getting help and service” on page 131 • “Purchasing additional services” on page 133 Before you contact Lenovo Often, you can solve your computer problems by referring to the information in the explanations of error codes, running diagnostic programs, or by consulting the Lenovo Web site. Registering your computer Register your computer with Lenovo.
Information about your computer and preinstalled software, if any, is available in the documentation that comes with your computer. That documentation includes printed books, online books, readme files, and help files. In addition, information about Lenovo products is available on the World Wide Web. Microsoft Service Packs are the latest software source for Windows product updates. They are available through Web download (connection charges might apply) or through disc.
The following items are not covered: • Replacement or use of parts not manufactured for or by Lenovo or non-warranted parts • • • • • Note: All warranted parts contain a 7-character identification in the format FRU XXXXXXX or a 10-character identification in the format FRU XXXXXXXXXX.
134 ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Appendix A. Regulatory information The latest compliance information is available at http://www.lenovo.com/compliance. Location of the UltraConnect wireless antennas ThinkPad notebook computers feature an UltraConnect™ wireless antenna system built into the display for optimal reception, which enables you to establish wireless communications wherever you are. Note: Depending on the model, your computer might look different from the following illustration.
• Advanced Audio Distribution Profile (A2DP) • Audio/Video Control Transport Protocol (AVCTP) • Audio/Video Distribution Transport Protocol (AVDTP) • A/V Remote Control Profile (AVRCP) • Basic Imaging Profile (BIP) • Basic Printing Profile (BPP) • Dial-Up Networking Profile (DUN) • File Transfer Profile (FTP) • Generic Access Profile (GAP) • Generic A/V Distribution Profile (GAVDP) • Hardcopy Cable Replacement Profile (HCRP) • Headset Profile (HSP) • Hands-Free Profile (HFP) • Human Interface Device Profile
• In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies to the use of wireless devices in a specific organization (such as airport or hospital), you are encouraged to ask for authorization to use integrated wireless cards prior to turning on the computer.
Electronic emission notices Federal Communications Commission Declaration of Conformity The following information refers to the ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 notebook computers, machine types 20EM, 20EL, 20G1, 20G0, and 20FY. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
EU contact: Lenovo, Einsteinova 21, 851 01 Bratislava, Slovakia German Class B compliance statement Deutschsprachiger EU Hinweis: Hinweis für Geräte der Klasse B EU-Richtlinie zur Elektromagnetischen Verträglichkeit Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie 2004/108/EG (früher 89/336/EWG) zur Angleichung der Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU-Mitgliedsstaaten und hält die Grenzwerte der EN 55022 Klasse B ein.
Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase Japan notice for ac power cord The ac power cord shipped with your product can be used only for this specific product. Do not use the ac power cord for other devices. Lenovo product service information for Taiwan Eurasian compliance mark Brazil audio notice Ouvir sons com mais de 85 decibéis por longos períodos pode provocar danos ao sistema auditivo.
Appendix B. WEEE and recycling statements Lenovo encourages owners of information technology equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. The latest environmental information is available at http://www.lenovo.com/ecodeclaration.
Disposing of Lenovo computer components Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above for collecting and recycling a disused computer or monitor.
Notice: This mark applies only to countries within the European Union (EU). Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union.
144 ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Appendix C. Restriction of Hazardous Substances Directive (RoHS) The latest environmental information is available at http://www.lenovo.com/ecodeclaration. European Union RoHS This Lenovo product, with included parts (cables, cords, and so on) meets the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”). For more information about Lenovo worldwide compliance on RoHS, go to: http://www.lenovo.
China RoHS Turkish RoHS The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Waste Electrical and Electronic Equipment (WEEE).
Ukraine RoHS India RoHS RoHS compliant as per E-Waste (Management & Handling) Rules, 2011. Appendix C.
148 ThinkPad S3, ThinkPad Yoga 14, and ThinkPad Yoga 460 User Guide
Appendix D. ENERGY STAR model information ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices. Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation. You might find an ENERGY STAR mark affixed on the computer or displayed on the power settings interface.
6. Clear the Allow this device to wake the computer check box. 7. Click OK.
Appendix E. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Active Protection System Secure Data Disposal ThinkPad ThinkPad logo TrackPoint UltraConnect Yoga Intel, Intel SpeedStep, and Intel vPro are trademarks of Intel Corporation in the U. S. and/or other countries. BitLocker, Microsoft, and Windows are trademarks of the Microsoft group of companies.
