User Guide
Table Of Contents
- Discover your Lenovo computer
- Chapter 1. Meet your computer
- Chapter 2. Get started with your computer
- Chapter 3. Explore your computer
- Chapter 4. Secure your computer and information
- Chapter 5. UEFI BIOS
- What is UEFI BIOS
- Enter the BIOS menu
- Navigate in the BIOS interface
- Change the display language of UEFI BIOS
- Change the display mode of UEFI BIOS (for selected models)
- Set the system date and time
- Change the boot priority order
- Enable or disable the configuration change detection feature
- Enable or disable the automatic power-on feature
- Enable or disable the smart power-on feature (for selected models)
- Enable or disable front and rear USB ports
- Change the ITS performance mode
- Change BIOS settings before installing a new operating system
- Update UEFI BIOS
- Recover from a BIOS update failure
- Clear CMOS
- Chapter 6. RAID
- Chapter 7. Diagnostics
- Chapter 8. CRU replacement
- Chapter 9. Help and support
- Appendix A. System memory speed
- Appendix B. Compliance information
- Appendix C. Notices and trademarks
2.5-inch primary hard disk drive
Remove the storage converter with the 2.5-inch primary hard disk drive. See “3.5-inch primary hard disk
drive” on page 35.
Removal steps
2.5-inch secondary hard disk drive
For access, do the following:
1. Remove these parts in order:
• “Computer cover” on page 30
• “Front bezel” on page 31
• “Optical drive” on page 32
• “Drive bay assembly” on page 33
2. On the bottom of the drive bay assembly, disconnect the signal cable and the power cable from the 2.5-
inch secondary hard disk drive.
Removal steps
36 P350 User Guide