Operation Manual

Chapter 2. Starting to use Windows
20
Putting the computer to sleep or shutting 
it down - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Whenyouhavefinishedworkingwithyourcomputer,youcanputittosleep
orshutitdown.
 Putting your computer to sleep
Ifyouwillbeawayfromyourcomputerforonlyashorttime,putthe
computertosleep.
Whenthecomputerisinsleepmode
,youcanquicklywakeittoresumeuse,
bypassingthestartupprocess.
Toputthecom
putertosleep,dooneofthefollowing:
•Closethedisp
laylid.
•Pressthepowe
rbutton.
• Preformthefoll
owingbasedontheoperatingsystem.
FortheW
indows7operatingsystem:
ClickStart Sleep
FortheW
indows10operatingsystem:
Movethecurs
ortothelower‐leftcorner,andthenselecttheStartbutton.
SelectPower Sleep .
Note: Putyourcomputertosleepbeforeyoumoveit.Movingyourcomputerwhilethehard
diskdriveisspinningcandamagetheharddisk,causinglossofdata.
Towakethecomputer,dooneofthefollowing:
•Pressanykeyonthekeyboard
.
•Pressthepowe
rbutton.