Installation Guide

frame is put on a table and the gesture sensor is close to the table
surface; 3) Hand movement is not in same horizontal level with the
gesture sensor position. We suggest you to stand closer to the frame and
wait until the keys on the frame light up before starting gesture command.
 How can I switch the frame to the next or previous photo after the
gesture function is turned off?
There are still 3 ways to do photo play control: 1) Through the Lenovo
Smart Frame app on the phone; 2) Tap the "+" or "-" keys on the frame to
next or previous photo; 3) Enable Lenovo Smart Frame skill and use
Google Assistant voice command to control.
 What causes the Lenovo Smart Frame to change channel by itself?
The frame has a sensor that will detect hand movements, such as swipe
up movement, to change to the next channel. Sometimes, reflected light
hitting on the sensor may look the same as a hand gesture and thus
causes the channels to change. If this seems to be the problem, it is
suggested to turn off the Gesture Control, which is under Device Settings.
 Why the keys on the frame keep lighting up without any intentional
operation?
When the frame detects someone is passing by or is close to the frame,
the keys will light up.
Sometimes, reflected light hitting the sensor may look similar to a person
passing by and thus causes the keys to light up.
 Why did the Lenovo Smart Frame not enter sleep mode according to my
configured time in settings?
As default, the frame will enter sleep mode when the two below conditions
are met at the same time: 1) sleep mode time is enabled, 2) when the