Manualshelf

Specification Sheet

ManualsBrandsLenox Tools ManualsHole Saw SetsLENOX Tools Bi-Metal Speed Slot Hole Saw with T3 Technology, Deluxe Kit, 17 Piece
12345678910
Lenox® Saw Blades
cobalt
ACGIH TLV (United States, 4/2014).
TWA: 0.02 mg/m³, (as Co) 8 hours.
OSHA PEL 1989 (United States, 3/1989).
TWA: 0.05 mg/m³, (as Co) 8 hours.
NIOSH REL (United States, 10/2013).
TWA: 0.05 mg/m³, (as Co) 10 hours. Form:
Dust and fumes
OSHA PEL (United States, 2/2013).
TWA: 0.1 mg/m³, (as Co) 8 hours.
tungsten
ACGIH TLV (United States, 4/2014).
TWA: 5 mg/m³, (as W) 8 hours.
STEL: 10 mg/m³, (as W) 15 minutes.
NIOSH REL (United States, 10/2013).
TWA: 5 mg/m³, (as W) 10 hours.
STEL: 10 mg/m³, (as W) 15 minutes.
silicon
OSHA PEL 1989 (United States, 3/1989).
TWA: 5 mg/m³ 8 hours. Form: Respirable
fraction
TWA: 10 mg/m³ 8 hours. Form: Total dust
NIOSH REL (United States, 10/2013).
TWA: 5 mg/m³ 10 hours. Form: Respirable
fraction
TWA: 10 mg/m³ 10 hours. Form: Total
OSHA PEL (United States, 2/2013).
TWA: 5 mg/m³ 8 hours. Form: Respirable
fraction
TWA: 15 mg/m³ 8 hours. Form: Total dust
nickel
OSHA PEL 1989 (United States, 3/1989).
TWA: 1 mg/m³, (as Ni) 8 hours.
NIOSH REL (United States, 10/2013).
TWA: 0.015 mg/m³, (as Ni) 10 hours.
ACGIH TLV (United States, 4/2014).
TWA: 1.5 mg/m³ 8 hours. Form: Inhalable
fraction
OSHA PEL (United States, 2/2013).
TWA: 1 mg/m³, (as Ni) 8 hours.
manganese
OSHA PEL 1989 (United States, 3/1989).
TWA: 1 mg/m³, (as Mn) 8 hours. Form: Fume
STEL: 3 mg/m³, (as Mn) 15 minutes. Form:
Fume
NIOSH REL (United States, 10/2013).
TWA: 1 mg/m³, (as Mn) 10 hours. Form:
Fume
STEL: 3 mg/m³, (as Mn) 15 minutes. Form:
Fume
OSHA PEL (United States, 2/2013).
CEIL: 5 mg/m³, (as Mn) Form: Fume
ACGIH TLV (United States, 4/2014).
TWA: 0.1 mg/m³, (as Mn) 8 hours. Form:
Inhalable fraction
TWA: 0.02 mg/m³, (as Mn) 8 hours. Form:
Respirable fraction
Section 8. Exposure controls/personal protection
Ingredient name
Exposure limits
Appropriate engineering
controls
:
Use only with adequate ventilation. If user operations generate dust, fumes, gas, vapor
or mist, use process enclosures, local exhaust ventilation or other engineering controls
to keep worker exposure to airborne contaminants below any recommended or statutory
limits.
Control parameters
Occupational exposure limits
:
4/2/2015.
Date of previous issue
:
No previous validation.
Version
:
1
5/12