Model no: CRW25 Batch no: PR4ϯϰϮ Please read and retain these instructions for future reference.
The illustrations used in this manual are to illustrate the operation method and structure of the product. Where there is a small difference between the physical item and the illustrations, please take the physical as the standard. Safety Precautions: Read these safety instructions before using your device and store them for possible future reference. - The device is not intended for use by persons (including children) with reduced physical, sensory or mental capacity.
Buttons/controls on the top of the unit: 1. ALARM 1/VOL- Button 2. ALARM 2/VOL+ Button 3. TUN-/MEM- Button 4. SNOOZE/DIMMER Button 5. TUN+/MEM+ Button 6. SCAN Button 7. ON/OFF Button 10. Wireless charging indicator 11. Wireless charging area Icons/indicators on the front of the unit: 12. PM indicator 13. FM indicator 14. Zz indicator 15. SLEEP indicator 16. ALARM 1 indicator 17. ALARM 2 indicator Inputs on the rear of the unit: 8. TIME SET/12_24H Button 9. SLEEP Button 18.
DEFAULT SETTING: When the unit is connected to power, it will show the default time as 12:08 PM. CLOCK / ALARM MODES: To view the time in 12 hour or 24-hour format, press the TIME SET/12_24H Button to change between the two time display modes. When the time is in 12-hour format, the PM indicator on the time display will be shown when the hours are in PM. SETTING THE CLOCK TIME: The unit must be in standby mode – plugged into power with no radio playing.
Follow the same procedure to set ALARM 2 in required. Use the ALARM2/VOL+ Button in place of the ALARM1/VOL- Button. STOPPING AN ALARM: To turn an alarm off after the wake time, press the ALM1 button (if the alarm is alarm 1) or press the ALM2 button (if the alarm is alarm 2). The alarm will stop and remain set for the next day if applicable. SNOOZE: To use the snooze function when an alarm has sounded, press the SNOOZE/DIMMER button. The snooze indicator (Zz) will be on the screen display.
the radio station in P01. If the unit had not automatically searched for the station, it can only be saved in position P01. Press and hold button TUN+ for 2 seconds to search for next station. Then stop searching, press the TIME SET/12_24H Button for two seconds, P02 will show and flash on the display, TUN-/MEM- Button or TUN+/MEM+ Button to select P01 or P02, Then press and hold the TUN-/MEM- Button or TUN+/MEM+ Button for two seconds to store the radio station in P02.
FEATURES: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. CLOCK / DOUBLE ALARM USB 5V/1A OUTPUT EXTERNAL AC ADAPTOR: INPUT AC 100~240V 50/60Hz OUTPUT 5.5V/1.5A。 WHITE 1.2INCH LED DISPLAY BATTERY BACK UP: 2 x AAA batteries (NOT INCLUDED) MONO SPEAKER OUTPUT OUTPUT POWER 1W SPEAKER IMPEDANCE:8ohm FM FREQUENCE 87.
