User Manual

DEFAULT SETTING:
When the unit is connected to power, it will show the default time as 12:08 PM.
CLOCK / ALARM MODES:
To view the time in 12 hour or 24-hour format, press the TIME SET/12_24H Button to change
between the two time display modes.
When the time is in 12-hour format, the PM indicator on the time display will be shown
when the hours are in PM.
SETTING THE CLOCK TIME:
The unit must be in standby mode – plugged into power with no radio playing.
Press and hold the TIME SET/12_24H Button for two seconds– located on the rear of the
unit.
When the hour is flashing on the screen, press the TUN-/MEM- or TUN+/MEM+ Button to
change the hour.
When the correct hour is shown on the screen, press the TIME SET/12_24H button.
When the minute is flashing on the screen, press the TUN-/MEM- or TUN+/MEM+ Button to
change the minutes.
When the correct minutes are shown on the screen, press the TIME SET/12_24H Button to
save the time.
SETTING AN ALARM:
Press the ALARM 1/VOL- Button once to see the set alarm time.
Press it again to have the alarm sound at the set time. The alarm 1 indicator will be shown on
the screen display.
Press it again, the alarm 1 indictor will no longer be shown on the screen display, and the
normal time will be on the screen.
To set an alarm:
Press and hold the ALARM 1/VOL- Button for two seconds.
When the hour is flashing on the screen, press the TUN-/MEM- or TUN+/MEM+ Button to
change the hour.
When the correct hour is shown on the screen, press the ALARM 1/VOL- Button.
When the minute is flashing on the screen, press the TUN-/MEM- or TUN+/MEM+ Button to
change the minute.
When the correct hour is shown on the screen, press the ALARM 1/VOL- Button.
The word BUZ (buzzer) or RAD (radio) will be shown on the screen, press the TUN-/MEM- or
TUN+/MEM+ Button to change between the two awake modes.
When your chosen option is shown on the screen, press the ALARM 1/VOL- Button.
The wake volume can now be set, press the TUN-/MEM- or TUN+/MEM+ Button to increase
or decrease the wake volume.
ALARM 1/VOL- Button Then press the ALARM 1/VOL- Button to save the settings.