PROGRAMMABLE PORTABLE CD PLAYER MODEL CD-10 OPERATING INSTRUCTIONS • • • • • • • • PLAYS MUSIC COMPACT DISCS, CD-R, CD-RW BRIGHT LED TRACK DISPLAY REPEAT ONE PLAY & REPEAT ALL PLAY MODES SKIP & SEARCH CD FUNCTIONS INTEGRATED FULL SIZE HANDLE 2 WAY POWER - AC/DC VOLUME LIMITER SWITCH REQUIRES 6 SIZE “C” BATTERIES (not included) PLEASE READ CAREFULLY BEFORE USE IB-CD10(SL)-WM-E-052605 IB-CD10(SL)-WM-E-050705.
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.
IMPORTANT SAFETY INSTRUCTIONS 15. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 16.
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS. 1. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). 2. Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the batteries.
CHOOSING THE POWER SOURCES You can use the AC power or batteries as a power source. To a wall outlet BATTERY DOOR (on the back of the set) NOTE: One blade of plug and outlet is wider. 1. Connecting the AC power TIP • If the plug of the AC power cord does not match your ou tlet , do not for c e i t. Reverse it and try again. The plug is polarized and only fits one way into the wall outlet and socket on the set’s rear.
PLAYING A CD PLAY/PAUSE button OPEN button VOLUME/POWER OFF switch (at the right side of the set) Connect the supplied AC power cord or batteries (refer to page 4). 1 POWER OFF V O L U M E 2 Rotate the VOLUME/POWER OFF switch (on the right side of the set) downwards past the click to turn on the set, the POWER lamp will be on, the display will show 2 dashes “ ” flashing, then “ ”. POWER REPEAT PLAY/PROG. Press the OPEN button to open the CD door and place a CD into the CD compartment.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS PLAY/PAUSE button PHONES jack POWER VOLUME/ POWER OFF sw itch REPEAT PLAY/PROG. SKIP/SEARCH buttons STOP button TIP To Press or Adjust • Adjust the volume VOLUME/OFF switch • • Wh en C D p lay is paused, the PLAY/ PROG. lamp will be off, the track number will flash and no music will play. To resume play, press the PLAY/PAUSE button again, the track number will stop flashing, the PLAY/PROG. lamp will be on and music will play.
PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY) You can play CD tracks over and over in normal or programmed play mode (refer to page 8). PLAY/PAUSE button VOLUME/POWER OFF switch REPEAT/PROGRAM button SKIP/SEARCH buttons 1. Turn on the set, the POWER lamp will be steadily on. 2. Select the track by pressing or , and then press PLAY/PAUSE 3. Press the REPEAT/PROGRAM button. To repeat A single track (song) All the tracks (all songs) on this disc Programmed tracks Press button.
PLAYING CD TRACKS IN PROGRAMMED ORDER OR IN RANDOM ORDER 1.Programmed play You can make a program of up to 20 tracks in the order you want them to be played. PLAY/PAUSE button STOP button VOL UME/OFF sw itch RANDOM button REPEAT/PROGRAM button SKIP/SEARCH buttons 1. Turn on the CD player by rotating the VOLUME/POWER OFF switch downward past click. Make sure the CD is stopped. ” 2. Press the REPEAT/PROGRAM button. The letters “ and the PLAY/PROG. lamp will flash. 3.
PRECAUTIONS On Safety • This CD player is designed to be played on a stable no vibration position. If you bump the set during CD play, the music will stop or skip for a few seconds. This is normal for this type of player. • As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
TROUBLE SHOOTING Problem Remedy • Insert the AC plug into a wall outlet securely. • Make sure the batteries are installed correctly and that they are fresh. • Rotate the VOLUME/PO WER O FF switc h The power is not on. downwards to turn on the set. • Adjust the volume. • Unplug the headphones when listening through speaker. • Check the batteries. • Insert the CD with the label side outward. • Make sure the CD is inserted onto the spindle There is no sound.
SPECIFICATION General Description Power source: Output power: Dimensions: AC 120V, 60Hz DC 6 size “C” batteries (not included) (Alkaline batteries are recommended) 1.1 Watts Width: 111 / 2 ” Depth: 35 / 8 ” Height: 8” Weight: 2.6 LBs (without batteries) CD Section Plays disc type: Laser wavelength: Tracking method: Any normal music CD used in portable players, including CD-R & CD-RW. 760 - 800 NM 3 - spot error detection 3.
