® COMPACT DISC PLAYER AM/FM STEREO CASSETTE RECORDER MODEL CD-102 OPERATING INSTRUCTIONS PLAYS ALL MUSIC COMPACT DISCS FULLY PROGRAMMABLE CD PLAYER WITH REPEAT RECEIVES AM/FM STEREO BROADCASTS RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONE FM STEREO AND POWER LED INDICATORS 2 WAY POWER - AC/DC REQUIRES 6 SIZE C BATTERIES (not included) PLEASE READ CAREFULLY BEFORE USE CD-102SY040300NLv.
SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PA RTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within the triangle is a warning sign alerting you of important i n s t r u c t i o n s accompanying the product.
SAFETY INSTRUCTIONS 14. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 15. Damage Requiring Service - The appliance should be serviced by qualified service personnel when: A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance has been exposed to rain; or D.
BATTERY SAFETY INSTRUCTIONS CAUTION: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions.
CHOOSING THE POWER SOURCES You can use the AC power or batteries as a power source. To a wall outlet AC SOCKET NOTE: One blade of plug and outlet is wider. Battery compartment TIP If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. The plugs are polarized and only fits one way into the wall outlet and back of the set. TIP Replace the batteries when the POWER lamp dims or when the player stops operating. Replace all the batteries with new ones.
PLAYING A CD 3 1 2 4 Connect the supplied AC power cord or batteries (see page 4). 1 Slide the FUNCTION switch to CD position (power on), the POWER lamp will be on. FU N C TIO N 2 Lift the right corner of the CD DOOR to open it and place the CD in the CD compartment. The label side of the CD should face upward. 3 Close the CD DOOR by pushing it down. The display will show the total tracks on that CD. 4 PLAY / PA USE POWER lamp Press the CD PLAY button.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME CONTROL (at the left side of the set) FUNCTION SWITCH OPEN THE CD DOOR BY LIFTING HERE TIP When CD play is paused, the PLAY/ PAUSE lamp will flash and no music will play. To resume play, press the PAUSE button again, the PLAY/PAUSE lamp will stop flashing and music will play. TIP If you bump the set during CD play, the music will stop or skip for a few seconds. This is normal for this type of player.
LISTENING TO THE RADIO 2 3 1 4 Connect the supplied AC power cord or batteries (see page 4). 1 Slide the FUNCTION switch to RADIO position, the POWER lamp will be on. FU N C TIO N 2 Slide the BAND switch to the proper band position (AM, FM, or FM STEREO) that you want. 3 T U N I N G 4 Tune into the station you prefer using the TUNING control (at the right side of the set). Adjust for the clearest sound. This indicator will light up when receiving FM Stereo broadcasts.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS 2 1 TIP • If the FM broadcast is noisy, slide the BAND switch from FM Stereo to FM position (MONO). • Next time you want to listen to the radio, just slide the FUNCTION switch to RADIO. The player automatically starts playing the previously tuned station.
PLAYING A TAPE 1 3 2 Connect the supplied AC power cord or batteries (see page 4). 1 TAPE PLAY DIRECTION Slide the FUNCTION switch to TAPE position. A FU N C TIO N 2 STOP/EJECT 3 Press the STOP/EJECT button to open the tape compartment and insert a recorded tape. Close the door. EMPTY REEL FULL REEL INS ERT TAPE THIS WAY F ULL REE L ON RIG HT Press the PLAY button. The player turns on and starts playing.
USE THESE OPERATIONS BUTTONS FOR ADDITIONAL VOLUME CONTROL MICROPHONE PAUSE PLAY STOP/EJECT FAST F.&REWIND HEADPHONE JACK To Press or Adjust Adjust the volume VOLUME control (at the left side of the set) Stop playback STOP/EJECT button Fast forward or rewind the tape FAST FORWARD REWIND button Pause playback PAUSE button Press again to resume play after pause.
RECORDING ON A TAPE 1 3 Connect the supplied AC power cord or batteries (see page 4). 1 STOP/EJECT 2 Press the STOP/EJECT button to open the tape compartment and insert a blank tape. Select the program source (AM, FM, CD, or, built-in microphone) you want to record. To record from the CD player, insert a CD and follow the steps to play a CD (see page 5).
USE THESE BUTTONS ADDITIONAL OPERATIONS FOR TIP • For best recording effect, use the AC power instead of batteries. • To erase a recording, just start a new recording, and the old one is automatically replaced. FUNCTION SWITCH PAUSE STOP/EJECT To Press or Adjust Stop recording STOP/EJECT button Pause recording PAUSE button Press the button again to resume recording. Turn off the power Press the STOP/EJECT button and slide the FUNCTION switch to TAPE position.
PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY) You can play CD tracks over and over in normal or program play modes (see page 14). FUNCTION SWITCH PROGRAM REPEAT LAMP LAMP 1. Slide the FUNCTION switch to CD position. 2. Select the track by pressing or , and then press 3. Press the CD REPEAT button. .
SELECTING YOUR OWN MUSIC PLAYING ORDER (Programmed Play) PROGRAM LAMP PGM You can make a program of up to 16 tracks in the order you want them to be played. NOTE: Programming is only done during stop mode. 1. Slide the FUNCTION switch to CD position. 2. Press the PROGRAM button. The letters Pr and the PROGRAM lamp will flash. 3. Press or to select the tracks you want to program in the order you want. 4 . Press the PROGRAM button to confirm. The letters Pr and the PROGRAM lamp will flash. 5 .
PRECAUTIONS On Safety On Power Sources As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel before operating it any further. For battery operation, use 6 size C batteries. We recommend alkaline batteries for longer life.
PRECAUTIONS (continued) Notes on Cassettes Notes on CDs playing, clean the CD with a Break off the cassette tab from side A Before cleaning cloth. Wipe the CD from the or B to prevent accidental recording. center out. Side A not use solvents such as benzene, Do thinner, commercially available Tab for side B cleaners or anti-static spray intended for vinyl LPs.
MAINTENANCE Cleaning the Lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower. Notes for Storing Cassette Tapes 1 . Do not put a tape near a magnetic field, such as a TV, or speaker. Magnetic fields may reduce the tape sensitivity or even erase the recording. 2 . Do not store tape for any length of time in a hot, moist or dusty place.
TROUBLE SHOOTING General Problem The power is not on. correctly and they are fresh. Make sure the FUNCTION switch is at the right position as you want. the volume. Adjust Unplug the headphones when listening through speakers. appears in the display Insert the CD with the label side up. There is no sound. CD player even when a CD is in place. CD does not play. Radio The sound drops out. Tape player Remedy Connect the AC power cord to a wall outlet securely.
SPECIFICATION General Description Power source: AC 120V, 60Hz 12Watts DC 12V (6 size C batteries) (Alkaline batteries are recommended) 2 - 3 1/ 2 8 ohm Speakers: Output power: 1.5W/channel Width: 14 1/ 2 Depth: 8 Height: 6 3/ 4 Weight: 5LBs (without batteries) Dimensions: CD Section Any normal CD used in portable players Plays disc type: 760 - 800 NM Laser wavelength: 3 - spot error detection Tracking method: Frequency response: 80Hz - 15kHz 3.
