® COMPACT DISC PLAYER AM/FM STEREO CASSETTE RECORDER MODEL CD-104 OPERATING INSTRUCTIONS PLAYS MUSIC COMPACT DISCS FULLY PROGRAMMABLE CD PLAYER WITH REPEAT RECEIVES AM/FM STEREO BROADCASTS RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONE FM STEREO AND POWER LED INDICATORS 2 WAY POWER - AC/DC REQUIRES 8 SIZE C BATTERIES (not included) PLEASE READ CAREFULLY BEFORE USE IB-CD104(TA)-FD-E-043002 IB-CD104(TA)-FD-E-043002.
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4.
BATTERY SAFETY INSTRUCTIONS CAUTION: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions.
CHOOSING THE POWER SOURCES You can use the AC power or batteries as a power source. To a wall outlet BATTERY COMPARTMENT AC SOCKET 1. Connecting the AC power cord TIP If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. The plugs are polarized and only fit one way into the wall outlet and back of the set.
PLAYING A CD 2 1 4 Connect the supplied AC power cord or batteries (see page 4). 1 Slide the FUNCTION switch to CD position (power on), the POWER lamp will be on. POWER lamp 2 Lift the right corner of the CD DOOR marked OPEN to open it and place the CD in the CD compartment. The label side of the CD should face upward. 3 Close the CD DOOR by pushing it down. The display will show the total tracks on that CD.
PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY) You can play CD tracks over and over in normal or programmed play mode (see page 7). FUNCTION SWITCH REPEAT 1. Slide the FUNCTION switch to CD position. 2. Select the track by pressing or , and then press 3. Press the CD REPEAT button. To repeat Press a single track (song) Press the REPEAT button once Display shows: all the tracks (all songs) Press the REPEAT button twice programmed tracks . During programmed play, press the REPEAT button twice REP.
SELECTING YOUR OWN MUSIC PLAYING ORDER (Programmed Play) You can make a program of up to 19 tracks in the order you want them to be played. NOTE: Programming is only done during stop mode. PROGRAM 1. Slide the FUNCTION switch to CD position. 2. Press the PROGRAM button. The PROG. and 00 will flash in the display. 3. Press or to select the tracks you want to program in the order you want. 4. Press the PROGRAM button to confirm. 5. Repeat steps 3 and 4.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME CONTROL (at the left side of the set) OPEN THE CD DOOR BY LIFTING HERE FUNCTION SWITCH BASS BOAST SWITCH TIP When CD play is paused, PLAY will flash and no music will play. To Press or Adjust Adjust the volume VOLUME control To resume play, press the PAUSE button again, PLAY will stop flashing and music will play.
LISTENING TO THE RADIO 2 1 3 4 Connect the supplied AC power cord or batteries (see page 4). 1 Slide the FUNCTION switch to RADIO position, the POWER lamp will be on. 2 Slide the BAND switch to AM, FM or FM ST. you prefer. 3 4 Tune into the station you prefer using the TUNING control (at the right side of the set). Adjust for the clearest sound. FM STEREO This FM STEREO indicator will light up when receiving FM Stereo broadcasts. 9 IB-CD104(TA)-FD-E-043002.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME CONTROL FUNCTION SWITCH TIP • Next time you want to listen to the radio, just slide the FUNCTION switch to RADIO. The player automatically starts playing the previously tuned station. To Slide or Adjust Adjust the volume VOLUME control (at the left side of the set) Turn off the Radio Slide the FUNCTION switch to TAPE position To improve broadcast reception Change position of the antenna for FM or FM Stereo. Move the set itself for AM.
PLAYING A TAPE 3 2 1 Connect the supplied AC power cord or batteries (see page 4). 1 TAPE PLAY DIRECTION Slide the FUNCTION switch to TAPE position. A Press the STOP/EJECT button to open the tape compartment and insert a recorded tape. Close the door. 2 3 4 EMPTY REEL FULL REEL INSER T TAPE TH IS WAY FU LL R EEL O N RIG HT Press the PLAY button. The player turns on and starts playing. AUTO STOP When the set finishes playing this side of the tape, the set will stop.
USE THESE OPERATIONS BUTTONS FOR ADDITIONAL VOLUME CONTROL PAUSE STOP/EJECT PLAY FAST F.&REWIND To Press or Adjust Adjust the volume VOLUME control (at the left side of the set) Stop playback STOP/EJECT button Fast forward or rewind the tape FAST FORWARD REWIND button button or PAUSE button Press again to resume play after pause.
RECORDING ON A TAPE 2 1 3 4 Connect the supplied AC power cord or batteries (see page 4). 1 2 Press the STOP/EJECT button to open the tape compartment and insert a blank tape. Select the program source (AM, FM, CD, or built-in microphone) you want to record. TAPE PLAY DIRECTION A EMPTY REEL To record from the CD player, insert a CD and follow the steps to play a CD (see page 5).
USE THESE BUTTONS ADDITIONAL OPERATIONS FOR TIP • • For best recording effect, use the AC power instead of batteries. To erase a recording, just start a new recording, and the old one is automatically replaced. PAUSE STOP/EJECT To Press or Adjust Stop recording STOP/EJECT button Pause recording PAUSE button Press the button again to resume recording. Turn off the power Press the STOP/EJECT button. 14 IB-CD104(TA)-FD-E-043002.
PRECAUTIONS On Safety On Power Sources As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. any solid object or liquid fall Should into the player, unplug the player, and battery operation, use 8 size C For batteries. We recommend alkaline batteries for longer life.
PRECAUTIONS (continued) Notes on Cassettes Notes on CDs playing, clean the CD with a Break off the cassette tab from side A Before cleaning cloth. Wipe the CD from the or B to prevent accidental recording. center out. Side A not use solvents such as benzene, Do thinner, commercially available Tab for side B cleaners or anti-static spray intended for vinyl LPs.
MAINTENANCE Cleaning the Lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower. Notes for Storing Cassette Tapes 1. Do not put a tape near a magnetic field, such as a TV, or speaker. Magnetic fields may reduce the tape sensitivity or even erase the recording. 2. Do not store tape for any length of time in a hot, moist or dusty place.
TROUBLE SHOOTING General Problem The power is not on. There is no sound. appears in the display even when a CD is in place. CD player Radio The sound drops out. Tape player Make sure the FUNCTION switch is at the right position as you want. Adjust the volume. Insert the CD with the label side up. CD does not play. The sound is weak or has poor quality. The RECORD button does not function/The tape does not play. The tape does not erase completely.
SPECIFICATION General Description Power source: AC 120V, 60Hz 12 Watts DC 12V (8 size C batteries) (Alkaline batteries are recommended) 2 - 3 1/2 8 ohm Speakers: Output power: 1.5W/channel Dimensions: Width: 12 Depth: 8 Height: 6 Weight: 5LBs (without batteries) CD Section Any normal CD used in portable players Plays disc type: Laser wavelength: 760 - 800 NM Tracking method: 3 - spot error detection Frequency response: 50Hz - 15kHz (+1/-2 dB) 3.