® COMPACT DISC PLAYER MW/FM DUAL CASSETTE RECORDER WITH REMOTE CONTROL MODEL CD-511 OPERATING INSTRUCTIONS INCLUDES FULL FEATURE REMOTE CONTROL MULTI-COLOURED FLUORESCENT DISPLAY PLAYS MUSIC COMPACT DISCS SING ALONG WITH KARAOKE FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY FUNCTION RECEIVES MW/FM STEREO BROADCASTS ROTARY BASS & TREBLE CONTROLS RECORDS FROM CD, TAPE OR RADIO 2 WAY POWER - AC/DC REQUIRES 8 X LR20 (SIZE D ) BATTERIES (NO INCLUDED) PLEASE READ CAREFULLY BEFORE USE I
WARNINGS WARNINGS The exclamation mark within a triangle is a warning sign alerting the user of important instructions accompanying the product. The lightning flash with arrowhead symbol within a triangle is a warning sign alerting the user of dangerous voltage inside the player. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CLASS 1 LASER PRODUCT To reduce the risk of electric shocks, do not remove the cover. No userserviceable parts inside the player. Refer all servicing to qualified personnel.
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE, PERSONAL INJURY OR DAMAGE TO THE PLAYER, PLEASE READ AND FOLLOW THESE INSTRUCTIONS. 1. Use only the type and size of batteries stated in the operating instructions booklet (Batteries are not included with the player. Please buy the correct batteries). 2. Do not dispose of the batteries by burning them as they may explode. Check with local regulations for any special instructions on the disposal of batteries. 3.
CHOOSING A POWER SOURCE AC power or batteries may be used as a power source. AC SOCKET TIP Replace the batteries when the display dims or when the player stops operating. Replace all batteries with new ones. Before replacing batteries, make sure there is no CD in the player and remember to check the Battery Safety Instructions on Page 2. 1.
ATTACHING THE SPEAKERS 1.Position one of the speakers to the right of the main unit. P R O G. 2. Align the tracks (rails) on the speaker with the main unit as shown in FIG. 1. FIG.1 3. When the speaker tracks (rails) are lined up, push the speaker into the tracks (rails) on the main unit as shown in FIG. 2. PROG. 4. Repeat steps 1 to 3 above for the left side. FIG.2 5.
REMOTE CONTROL The CD PLAYER can be operated with the REMOTE CONTROL provided (includes the following controls: POWER ON/OFF, MUTE, VOLUME, CD REPEAT and PLAY). NOTE: When you use the REMOTE CONTROL to operate the CD PLAYER, make sure the POWER button on the main unit is turned on. Otherwise, the REMOTE CONTROL will not work. 9 1 8 2 3 7 4 6 5 1. 2. 3. 4. 5. 6. 7. 8. 9.
PLAYING A CD 1 5 3 2 6 PROG. Connect the supplied AC power cord or batteries (see page 3). 1 Press the POWER button for the VFD display and AUDIO LEVEL to come on. 2 Slide the FUNCTION switch to the CD position. Two dashes, -- , will appear on the VFD display. 3 CLOSE 4 5 6 Open the CD DOOR by pressing the bottom righthand corner of the CD door marked OPEN/CLOSE and place the CD in the CD compartment. The label side of the CD should face upward.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME CONTROL TIP The AUDIO LEVEL will light up when the power is on and the pointer will indicate any changes in audio levels. PROG. TIP When CD play is paused, will flash and the CD will stop playing. To resume play, press the PAUSE button again, will stop flashing and the CD will play. TIP If the player or the table it is sitting on is knocked while a CD is playing, the CD will stop or skip for a few seconds.
REPEAT PLAY PLAYING CD SONGS (TRACKS) REPEATEDLY CD tracks can be played over and over again in either normal or programmed play mode (see page 9). (NOTE: To use this feature, you need to operate the set with the REMOTE CONTROL, because there is no REPEAT button on the main unit.) POWER BUTTON REPEAT FUNCTION SWITCH 1. 2. 3. 4. Press the POWER button for the display to light up. Set the FUNCTION switch to the CD position.
PROGRAMMED CD PLAY SELECTING YOUR OWN MUSIC PLAYING ORDER Up to 19 tracks may be programmed to play in whatever order you wish. PROGRAMME NOTE: Programming is only done during STOP mode. 1 During STOP mode, press the PROGRAMME button. and PRG. will flash in the display. 2 Press the SKIP/SEARCH , until the buttons, or desired track shows in the display. 3 Press the PROGRAMME button. and PRG. will flash in the display. 4 Repeat steps 2 and 3 until all the desired tracks are programmed.
LISTENING TO THE RADIO 3 2 4 1 3 PROG. 6 Connect the supplied AC power cord or batteries (see page 3). 1 Press the POWER button for the VFD display and the AUDIO LEVEL to come on. 2 Set the FUNCTION switch to the RADIO position. 3 Set the BAND switch to the proper band position (MW or FM), and the FM MODE switch to STEREO or MONO. MW FM 4 Tune into the station of your choice using the TUNING control. Adjust for the clearest sound. 5 FM ST.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME FM MODE FUNCTION PROG. TIP • If an FM broadcast is noisy, move the FM MODE switch from STEREO to MONO. player has an electronic volume control. The volume can be raised or lowered by pressing the VOLUME UP or DOWN button. To Press or Set Adjust the volume VOLUME control (UP or DOWN). Turn off the Radio Set the FUNCTION switch to the TAPE position or press the POWER button.
PLAYING A TAPE 1 2 PROG. 4 3 Connect the supplied AC power cord or batteries (see page 3). 1 Press the POWER button for the VFD display to come on. F U LL REEL Set the FUNCTION switch to the TAPE position. 3 STOP/EJECT 4 PLAY Press the PLAY button. The player will come on and start playing the tape. 5 AUTO STOP When the player comes to the end of one side of the tape, it will stop. To listen to the other side of the tape, turn the tape over, insert and press PLAY.
RELAY PLAY 2 1 PROG. 5 4 3 Connect the supplied AC power cord or batteries (see page 3). To play tapes in DECK A and then DECK B, follow the steps below: 1 Press the POWER button for the VFD display and AUDIO LEVEL to come on. 2 Set the FUNCTION switch to the TAPE position. 3 PLAY Press the cassette PLAY button on DECK A for the tape in DECK A to play. 4 PAUSE Press the cassette PAUSE button on DECK B. 5 PLAY Press the cassette PLAY button on DECK B.
USE THESE BUTTONS FOR CASSETTE TAPE OPERATIONS ADDITIONAL VOLUME CONTROL PROG. PLAY RECORD PAUSE PLAY STOP/EJECT PAUSE STOP/EJECT FAST F.&REWIND FAST F.
RECORDING ONTO A TAPE 1 PROG. 3 MICROPHONE JACK 4 2 Connect the supplied AC power cord or batteries (see page 3). 1 Press the POWER button for the VFD display and AUDIO LEVEL to come on. 2 STOP/EJECT 3 OR OR 4 THEN 5 RECORD REWIND PLAY Press the STOP/EJECT button (DECK B) to open the tape compartment and insert a blank tape. Select the source (MW, FM, CD, or microphone) you wish OK to record from.
USE THESE BUTTONS ADDITIONAL OPERATIONS FOR PROG. TIP • PAUSE For best recording DOUBLE SPEED SWITCH STOP/EJECT effect, use AC power instead of batteries. • To erase a recording, simply start a new recording, and the old one will automatically be erased. • See page 20 for notes on cassettes. To Press or Set Stop recording STOP/EJECT button Pause recording PAUSE button Press the button again to resume recording.
SING ALONG WITH KARAOKE FUNCTION VOLUME MIC VOLUME PROG. MICROPHONE JACK 2 Connect the supplied AC power cord or batteries (see page 3). 1 Insert the microphone plug into the microphone jack. To avoid howling from the microphone, lower the volume level first. NOTE: Microphone is not included. You can purchase one at the shop where you purchased your player.
USE THESE OPERATIONS BUTTONS FOR ADDITIONAL PROG. VOLUME CONTROL MIC VOLUME BASS TREBLE To Press or Adjust Adjust the MIC volume MIC. VOLUME Adjust the CD or TAPE volume VOLUME control Adjust the sound effect for low or high tones. BASS or TREBLE control. TIP: If any squealing or howling (feedback) occurs during KARAOKE use, move the microphone away from the speakers or turn down the volume.
PRECAUTIONS Safety Power Sources The laser beam used in the CD player section could damage your eyes so you should never attempt to take the cabinet apart. Refer servicing to qualified personnel only. If any solid object or liquid gets into the player, unplug it, and have it checked by qualified personnel before operating it again. Location battery operation, use 8 X LR20 For (size D) batteries (not included). We recommend alkaline batteries for longer life.
PRECAUTIONS (continued) Cassettes CDs playing, clean the CD with a Break off the cassette tab from Side Before A or B to prevent accidental recording. cleaning cloth. Wipe the CD from the centre out. Side A not use solvents such as benzene, Do thinner, commercially available Tab for side B cleaners or anti-static spray intended for vinyl LPs.
MAINTENANCE Cleaning the Lens If the lens is dirty, skipping may occur while the CD is playing. Clean with a commercially available lens cleaner and blower. Storage Cassette Tapes 1. Never place tapes near a magnetic field such as a TV, or speaker. Magnetic fields may reduce tape sensitivity or even erase recording. 2. Do not store tapes for any length of time in hot, damp or dusty locations.
TROUBLE SHOOTING Problem General The power is not on. There is no sound. VFD display does not light up. Tape player Radio CD player appears in the display even when a CD is in place. CD does not play. The sound drops out. CD does not play while radio may continue to play. Remedy Connect the AC power cord securely to a wall outlet. Make sure the batteries are inserted correctly and are not worn out. Make sure the FUNCTION switch is in the correct position.
SPECIFICATION General Description AC 240V, 50Hz 20Watts DC 8 X LR20 (size D) batteries (not included) for player DC 2 X LR4 (size AAA) batteries (not included) for Remote Control (Alkaline batteries are recommended) Speakers (2 ways): 50 - 125mm 4 ohm woofers 50 - 75mm 4 ohm tweeters with crossover Output power: 5.0W/channel Dimensions (approx.): MAIN UNIT SPEAKER Width: 265MM 172MM Depth: 220MM 195MM Height: 260MM 315MM Weight: 2.0KG 1.
