COMPACT DISC PLAYER WITH AM/FM RADIO MODEL CD-109 OPERATING INSTRUCTIONS PLAYS MUSIC COMPACT DISCS FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY RECEIVES AM/FM BROADCASTS POWER LED INDICATOR 2 WAY POWER - AC/DC REQUIRES 6 SIZE C BATTERIES (not included) PLEASE READ CAREFULLY BEFORE USE IB-CD109(AD)-WM-E-121302
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4.
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions.
CHOOSING THE POWER SOURCES You can use the AC power or batteries as a power source. To a wall outlet NOTE: One blade of the plug and outlet is wider. Battery compartment Replace the batteries when the POWER lamp dims or when the player stops operating. Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player and remember to check the Battery Safety Instructions on Page 3.
PLAYING A CD 2 1 4 Connect the supplied AC power cord or batteries (see page 4). 1 Slide the FUNCTION switch (at the right side of the set) to CD position, the POWER lamp will turn on. 2 POWER lamp Lift the right corner of the CD DOOR to open it and place a CD in the CD compartment. The label side of the CD should face upward. 3 Close the CD DOOR by pushing it down. The display will show the total tracks of that CD. 4 PLAY/PAUSE Press the CD PLAY button.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS OPEN THE CD DOOR BY LIFTING HERE FUNCTION SWITCH (at the right side of the set) VOLUME CONTROL (at the left side of the set) PHONES JACK BACKWARD TIP When CD play is paused, the track number will flash and no music will play. To resume play, press the PAUSE button again, the track number will stop flashing and music will play. TIP If you bump the set during CD play, the music will stop or skip for a few seconds. This is normal for this type of player.
PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY) You can play CD tracks over and over in normal or programmed play modes (see page 8). REPEAT PLAY/PROGRAM LAMP LAMP BACKWARD PROGRAM/REPEAT BUTTON RANDOM FORWARD BUTTON FUNCTION SWITCH PLAY/PAUSE 1. Slide the FUNCTION switch (at the right side of the set) to the CD position. 2. Select the track by pressing SKIP/SEARCH BACKWARD or FORWARD , and then press . 3. Press the CD PROGRAM/REPEAT button.
SELECTING YOUR OWN MUSIC PLAYING ORDER (Programmed Play) You can make a program of up to 16 tracks in the order you want them to be played. PROGRAM/REPEAT BUTTON PLAY/PROGRAM LAMP PROG./ REPEAT 1. Slide the FUNCTION switch to CD position. Make sure the CD is stopped. 2. Press the PROGRAM/REPEAT button. The letters P0 will show and the PLAY/PROG. lamp will flash. 3. Press or to select the tracks you want to program in the order you want. 4. Press the PROGRAM/REPEAT button to confirm.
LISTENING TO THE RADIO 1&2 3 Connect the supplied AC power cord or batteries (see page 4). 1 2 3 Slide the FUNCTION switch (at the right side of the set) to RADIO position, the POWER lamp will turn on. Slide the BAND switch (at the right side of the set) to the proper band position (AM or FM) that you want. Tune into the station you prefer using the TUNING control. Adjust for the clearest sound.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME CONTROL TIP • Next time you want to listen to the radio, just slide the FUNCTION switch to RADIO position. The player automatically starts playing the previously tuned station. FUNCTION SWITCH To Slide or Adjust Adjust the volume VOLUME control (at the left side of the set) Turn off the Radio Slide the FUNCTION switch (at the right side of the set) to OFF position To improve broadcast reception Change position of the antenna for FM.
PRECAUTIONS On Safety On Power Sources battery operation, use 6 size C For batteries. We recommend alkaline As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. batteries for longer life.
PRECAUTIONS (continued) Notes on CDs playing, clean the CD with a Before cleaning cloth. Wipe the CD from the center out. MAINTENANCE Cleaning the Lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower. not use solvents such as benzene, Do thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
TROUBLE SHOOTING General Problem The power is not on. Remedy Connect the AC power cord to a wall outlet securely. Make sure the batteries are inserted correctly and they are fresh. There is no sound. Make sure the FUNCTION switch is at the right position as you want. Adjust the volume. Unplug the headphones when listening through speakers. appears in the display even when a CD is in place. CD player CD does not play. condensation. Make sure the FUNCTION switch is at CD position.
SPECIFICATION General Description Power source: AC 120V, 60Hz 12Watts DC 9V (6 size C batteries) (Alkaline batteries are recommended) Speakers: 2 - 3 8 ohm Output power: 1.5W/channel Dimensions: Width: 12 Depth: 10 Height: 6 Weight: 3.3LBs (without batteries) CD Section Plays disc type: Any normal CD used in portable players Laser wavelength: Tracking method: 760 - 800 NM 3 - spot error detection 3.
