® CD AUDIO SYSTEM WITH DIGITAL RADIO & BASS REFLEX SPEAKERS MODEL SL-328 OPERATING INSTRUCTIONS DIGITAL RADIO WITH PRESETS PLAYS MUSIC COMPACT DISCS FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY RECEIVES AM/FM STEREO BROADCASTS RECORDS CASSETTES FROM CD OR RADIO AC POWER INDICATOR LARGE BACKLIT LCD DISPLAY FOR CD & RADIO PRESET GRAPHIC EQUALIZER SYSTEM BASS REFLEX SPEAKER SYSTEM PLEASE READ CAREFULLY BEFORE USE IB-SL328-SY-WM-E-120801
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4.
CONNECTING THE SPEAKERS AND ANTENNAS Carefully unwind and stretch out the speaker wire on the back of each speaker box and plug the right plug into Speaker Jack marked R , and the left plug into Speaker Jack marked L .
REMOTE CONTROL You can control the player with the provided REMOTE control. 1 2 3 4 5 6 8 9 10 11 12 13 7 14 1. MUTE 2. TAPE 3. BAND 4. CD REPEAT/RADIO PRESET 5. RADIO TUNING DOWN/CD BACKWARD SKIP 6. STOP 7. VOLUME DOWN 8. POWER 9. CD 1 0 . RADIO 11. CD PROGRAM/RADIO STORE 1 2 . RADIO TUNING UP/CD FORWARD SKIP 1 3 . CD PLAY/PAUSE 1 4 . VOLUME UP Slide the battery cover to remove.
CLOCK SETTING 3&5 NOTE: If the POWER switch is ON and you want to set the time, press the TAPE switch first, and then follow the listed steps to set the clock. 2,4&6 Connect the AC power cord (see page 3). 1 2 3 4 5 6 Once the set is connected with the AC power, the display will show as right: AM HOUR MINUTE Press the PROGRAM(STORE) switch, the hour digits will flash for 10 seconds. Press the TIME/TUNING switches to select the correct hour time.
PLAYING A CD 5 STANDBY INDICATOR 1 3&4 6 2 Connect the AC power cord (see page 3). 1 2 3 4 5 Press the POWER switch, the AC POWER STANDBY INDICATOR will go off and the display will light up. Press the CD switch, the display will show six zeros 0. TRACK Press the CD DOOR OPEN/CLOSE button to open the CD DOOR and place the disc in the CD compartment. The label side of the CD should face outward. Close the CD DOOR by pressing the CD DOOR OPEN/CLOSE button again.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS TRACK CD DOOR OPEN/CLOSE POWER VOLUME + VOLUME - TIP When CD play is paused, the elapsed playing time will flash and no music will play. To resume play, press the PAUSE button again, the elapsed playing time will stop flashing and music will play. TIP If you bump the set or table it is sitting on, during CD play, the music will stop or skip for a few seconds.
REPEAT PLAY PLAYING CD SONGS (TRACKS) OVER AND OVER You can play CD tracks over and over in normal or programmed play modes (see page 9). POWER REPEAT PROGRAM GRAPHIC CD FUNCTION EQUALIZER SWITCH 1. 2. 3. 4. Press the POWER switch, the AC POWER STANDBY INDICATOR will go off. Press the CD switch. Select the track by pressing or , and then press . Press the CD REPEAT button.
SELECTING YOUR OWN MUSIC PLAYING ORDER (Programmed Play) You can make a program of up to 20 tracks in the order you want them to be played. NOTE: Programming is only done during stop mode. POWER PROGRAM 1 2 During STOP mode, press the PROGRAM (STORE) button. The display will show , MEMORY and TRACK will flash in the display. MEMORY TRACK Press the SKIP/SEARCH buttons either or until the desired track shows in the display. 3 Press the PROGRAM button. The display will show .
LISTENING TO THE RADIO 4 1 6 3 2 Connect the AC power cord (see page 3). 1 Press the POWER switch, the AC POWER STANDBY INDICATOR will be off. 2 Press the RADIO switch. 3 Press the BAND switch to choose the proper band (AM or FM ) that you want. Tune into the station you prefer using the TUNING UP or DOWN button. Each time the button is pressed, the frequency changes.
PRESETTING RADIO STATIONS Allows you to store your favorite stations for quick one button tuning. 3 2&4 Connect the AC power cord (see page 3). 1 Follow Steps 1 to 4 (LISTENING TO THE RADIO on the previous page) to select a station. 2 Press the PROGRAM (STORE) switch, CH will show and MEMORY will flash in the display for about 5 seconds. 3 4 While the MEMORY is flashing, press the PRESET (REPEAT) button to choose a memory location (01-20).
LISTENING TO THE PRESET STATIONS (after you programmed them) 1 2 3 4 Press the RADIO switch. Press the AM/FM BAND switch to select the desired band. Press the PRESET (REPEAT) switch several times to choose a memory location (01-20). You will receive the station you stored into that preset memory location. USE THESE OPERATIONS 2 Connect the AC power cord (see page 3). Press the POWER switch, the dial will light. BUTTONS 1 1 4 3 2 FOR ADDITIONAL To Press or Adjust 1.
PLAYING A TAPE 1 2 IN S E R T TH IS W AY 4 3 Connect the AC power cord (see page 3). 1 Press the POWER switch, the dial will light up. 2 Press the TAPE switch. 3 Press the STOP/EJECT button to open the tape compartment and insert a recorded tape as shown. 4 5 6 Close the door. Press the PLAY button. The player turns on and starts playing. AUTO STOP When the set finishes playing this side of the tape, the set will stop.
USE THESE OPERATIONS BUTTONS FOR ADDITIONAL AC POWER STANDBY INDICATOR MUTE INDICATOR VOLUME + & VOLUME - EQUALIZER HEADPHONE JACK PLAY STOP/EJECT PAUSE REWIND & FAST FORWARD To Press or Adjust Adjust the volume VOLUME + or VOLUME - switch Get different sound effect EQ switch Stop playback STOP button Fast forward or rewind the tape FAST FORWARD REWIND button Pause playback PAUSE button Press again to resume play after pause.
RECORDING ON A TAPE IN S E R T TH IS W AY 3 1 Connect the AC power cord (see page 3). 1 2 Press the STOP/EJECT button to open the tape compartment and insert a blank tape. Select the program source (AM, FM or CD) you want to record. To record from the CD player, insert a CD and follow the steps to play a CD (see page 6). To record from a radio, press the RADIO switch, select AM or FM band and tune into the station you want (see page 10). 3 4 Press the RECORD button to start recording.
USE THESE BUTTONS ADDITIONAL OPERATIONS FOR TIP • To erase a recording, just start a new recording, and the old one is automatically replaced. STOP/EJECT PAUSE To Press or Adjust Stop recording STOP/EJECT button Pause recording PAUSE button Press the button again to resume recording. Turn off the player Press the STOP/EJECT button and press the POWER switch to off, the AC POWER STANDBY INDICATOR will go on.
PRECAUTIONS On Safety On Operation the laser beam used in the CD If the player is brought directly from a As player section may be harmful to the cold to a warm location, or is placed eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. any solid object or liquid fall Should into the player, unplug the player, and have it checked by qualified personnel before operating it any further.
PRECAUTIONS (continued) Notes on Cassettes Notes on CDs playing, clean the CD with a Break off the cassette tab from side A Before cleaning cloth. Wipe the CD from the or B to prevent accidental recording. center out. Side A not use solvents such as benzene, Do thinner, commercially available Tab for side B cleaners or anti-static spray intended for vinyl LPs.
MAINTENANCE Cleaning the Lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower. Notes for Storing Cassette Tapes 1. Do not put a tape near a magnetic field, such as a TV, or speaker. Magnetic fields may reduce the tape sensitivity or even erase the recording. 2. Do not store tape for any length of time in a hot, moist or dusty place.
TROUBLE SHOOTING General Problem The power is not on. Remedy Connect the AC power cord to a wall outlet securely. Make sure to press the right function switch as you want. Adjust the volume. Unplug the headphones when listening through speakers. flashes in the CD player display even when a CD is in place. CD does not play. Radio Make sure that the CD compartment is closed. Place the CD with the label side up. Clean the CD.
SPECIFICATION General Description Power source: AC 120V, 60Hz 25 Watts Speakers (2 ways): 2 - 4 4 ohm woofers, and 2 - 2 4 ohm tweeters with crossover Output power: 5.0W/channel Dimensions (approx.): CD Section Plays disc type: Laser wavelength: Tracking method: Frequency response: Width: Depth: Height: Weight: Main set 6 1 / 4 10 11 6.6LBs Speaker 5 1/ 2 8 3/ 4 10 3/ 4 4.4LBs Any normal CD used in portable players 760 - 800 NM 3 - spot error detection 3.
