® COMPACT DISC PLAYER AM/FM DUAL CASSETTE RECORDER WITH REMOTE CONTROL MODEL CD-163 OPERATING INSTRUCTIONS INCLUDES FULL FEATURE REMOTE CONTROL MULTI-COLORED FLUORESCENT DISPLAY PLAYS MUSIC COMPACT DISCS KARAOKE FUNCTION WITH DUAL MIC.
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4.
BATTERY SAFETY INSTRUCTIONS CAUTION: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions.
CHOOSING THE POWER SOURCES You can use AC power or batteries as a power source. To a wall outlet NOTE: One blade of plug and outlet is wider. AC SOCKET 1. Connecting the AC power cord TIP If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. The plugs are polarized and only fit one way into the wall outlet and back of the set. TIP Replace the batteries when the set stops operating. Replace all the batteries with new ones.
ATTACHING THE SPEAKERS 1.Bring one of the speakers to the right side of the set. 2. Align the rails of the speaker box with the main set as shown in FIG.1. FIG.1 3. When speaker align with the rails, push the speaker into the rails as shown in FIG. 2. 4. Repeat above steps 1 to 3 for the left side. FIG.2 5.Carefully unwind the speaker wire from behind each speaker box and plug the right plug into Speaker Jack R, also plug the left plug into Speaker Jack L (as shown in FIG. 3).
REMOTE CONTROL You can control the CD PLAYER with the provided REMOTE CONTROL (including the functions of POWER ON/OFF, MUTE, VOLUME control, CD REPEAT and PLAY features). NOTE: When you use the REMOTE CONTROL to operate the CD PLAYER, make sure the POWER switch on the main set is turned on, otherwise, the REMOTE CONTROL will have no functions to the set. 9 1 8 2 3 7 4 6 5 1. 2. 3. 4. 5. 6. 7. 8. 9.
PLAYING A CD 3 1 2 5 6 Connect the supplied AC power cord or batteries (see page 4). 1 POW ER Press the POWER switch, the VFD display will turn on and the STANDBY lamp will go off. S TA N D B Y 2 Set the FUNCTION switch to CD position, two dashes -- will show on the VFD display. 3 Open the CD DOOR by pressing the right corner marked OPEN/CLOSE and place the CD in the CD compartment. The label side of the CD should face upward. 4 Close the CD DOOR by pushing it down.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME CONTROL TIP When CD play is paused, will flash and no music will play. FUNCTION SWITCH To resume play, press the PAUSE button again, will stop flashing and music will play. TIP If you bump the set or the table it is sitting on, during CD play, the music will stop or skip for a few seconds. This is normal for this type of player.
REPEAT PLAY PLAYING CD SONGS (TRACKS) OVER AND OVER You can play CD tracks over and over in normal or programmed play modes (see page 10). (NOTE: To use this feature, you need to operate the set with the REMOTE CONTROL, because there is no REPEAT button on the main set.) POWER SWITCH REPEAT FUNCTION SWITCH 1. Press the POWER switch, the STANDBY lamp will turn off and the display will light up. 2. Set the FUNCTION switch to CD position. 3. Select the track by pressing or , and then press . 4.
PROGRAMMED CD PLAY SELECTING YOUR OWN MUSIC PLAYING ORDER You can make a program of up to 19 tracks to play in the order you want them to be played. NOTE: Programming is only done during stop mode and with REMOTE CONTROL. PROGRAM 1 During STOP mode, press the PROGRAM button on the REMOTE CONTROL. and PRG. will flash in the display. 2 Press the SKIP/SEARCH buttons either or until the desired track shows in the display. 3 Press the PROGRAM button. and PRG. will flash in the display.
LISTENING TO THE RADIO 3 4 1 2 6 Connect the supplied AC power cord or batteries (see page 4). 1 PO W ER Press the POWER switch, the STANDBY lamp will go off and the VFD display will turn on. STAN DB Y 2 Set the FUNCTION switch to RADIO position. 3 Set the BAND switch to the proper band position (AM or FM), and set the FM MODE switch to STEREO or MONO. 4 Tune into the station you prefer using the TUNING control. Adjust for the clearest sound.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS FM MODE TIP • If the FM broadcast is noisy, set the FM MODE switch from STEREO to MONO. set has an electronic volume control, you may raise or lower the volume by pressing the VOLUME or ). control ( FUNCTION VOLUME To Press or Set Adjust the volume VOLUME control ( ). or Turn off the Radio Set the FUNCTION switch to TAPE position or press the POWER switch.
PLAYING A TAPE 1 2 4 3 Connect the supplied AC power cord or batteries (see page 4). PO W ER F U LL REEL 2 Set the FUNCTION switch to TAPE position. 3 Press the STOP/EJECT button (DECK A or DECK B) to open the tape compartment and insert a recorded tape. Close the door. STOP/EJECT 4 PLAY 5 AUTO STOP EM PTY REEL IN S E R T T H IS W AY Press the PLAY button. The player turns on and starts playing. When the set finishes playing one side of the tape, the set will stop.
RELAY PLAY 1 2 5 4 3 Connect the supplied AC power cord or batteries (see page 4). To play tapes in DECK A and then DECK B, follow the steps below: 1 PO W ER Press the POWER switch, the STANDBY lamp will go off and the VFD display will turn on. STAN DB Y 2 Set the FUNCTION switch to TAPE position. 3 Press the cassette PLAY button on DECK A, DECK A will play. PLAY 4 Press the cassette PAUSE button on DECK B. PAUSE 5 PLAY 6 Press the cassette PLAY button on DECK B.
USE THESE BUTTONS FOR CASSETTE TAPE OPERATIONS PLAY RECORD PAUSE PLAY STOP/EJECT ADDITIONAL VOLUME CONTROL PAUSE STOP/EJECT REWIND & FAST F. REWIND & FAST F. To Press or Adjust Adjust the volume Press the VOLUME control ( or ). Stop playback STOP/EJECT button Fast forward or rewind the tape FAST FORWARD REWIND button Pause playback PAUSE button Press again to resume play after pause.
RECORDING ON A TAPE 1 3 MICROPHONE JACKS 4 2 Connect the supplied AC power cord or batteries (see page 4). PO W ER 2 Press the POWER switch, the STANDBY lamp will go off and the VFD display will turn on. STAN DB Y STOP/EJECT 3 Press the STOP/EJECT button (DECK B) to open the tape compartment and insert a blank tape. Select the program source (AM, FM, CD, or microphone) you want to record.
USE THESE BUTTONS ADDITIONAL OPERATIONS FOR DUBBING SPEED SWITCH TIP • For best recording effect, use the AC power instead of batteries. • To erase a recording, just start a new recording, and the old one is automatically replaced. • see page 21 for notes on cassettes. STOP/EJECT PAUSE To Press or Set Stop recording STOP/EJECT button Pause recording PAUSE button Press the button again to resume recording.
SINGING ALONG WITH KARAOKE FUNCTION VOLUME 2 MICROPHONE JACKS MIC VOLUME Connect the supplied AC power cord or batteries (see page 4). 1 Set the KARAOKE switch (on the back of the set) to ON position. 2 Insert microphone plugs into the microphone jacks. To avoid mic howling, lower the volume level setting first. NOTE: Microphones are not included, you may purchase microphones where you bought this set.
USE THESE OPERATIONS BUTTONS FOR ADDITIONAL VOLUME CONTROL MIC VOLUME TREBLE TREBLE BASS BASS BALANCE To Press or Adjust Adjust the MIC volume MIC VOLUME Adjust the CD or TAPE music volume VOLUME control Adjust the RIGHT & LEFT channel output. BALANCE control Adjust the sound effects for low and high tones. BASS or TREBLE controls. TIP: If there is squealing or howling (feedback) noise during KARAOKE use, move the microphone away from the speakers or turn down the volume.
PRECAUTIONS On Safety On Power Sources the laser beam used in the CD For battery operation, use 8 size D As batteries. We recommend alkaline player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. any solid object or liquid fall Should into the set, unplug the player, and batteries for longer life.
PRECAUTIONS (continued) Notes on Cassettes Notes on CDs playing, clean the CD with a Break off the cassette recording tabs Before cleaning cloth. Wipe the CD from the from side A or B to prevent accidental recording. center out. Side A not use solvents such as benzene, Do thinner, commercially available Tab for side B cleaners or anti-static spray intended for vinyl LPs.
MAINTENANCE Cleaning the Lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower. Notes for Storing Cassette Tapes 1. Do not put a tape near a magnetic field, such as a TV, or speaker. Magnetic fields may reduce the tape sensitivity or even erase the recording. 2. Do not store tape for any length of time in a hot, moist or dusty place.
TROUBLE SHOOTING General Problem The power is not on. There is no sound. Remedy Connect the AC power cord to a wall outlet securely. Make sure the batteries are inserted correctly and they are fresh. Make sure the FUNCTION switch is at the right position as you want. Adjust the volume. Unplug the headphones when listening through speakers. CD player VFD display does not light up. appears in the display even when a CD is in place. CD does not play.
SPECIFICATION General Description Power source: AC 120V, 60Hz 22Watts DC 8 size D batteries for set DC 2 size AAA batteries for Remote Control (Alkaline batteries are recommended) Speakers (2 ways): and 2 - 5 4 ohm woofers 2 - 3 4 ohm tweeters with crossover Output power: 5.0W/channel Dimensions: Width: 24 1/ 4 Depth: 8 1/ 2 Height: 12 7/ 8 Weight: 15.
LIMITED WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a period of 90 days after purchase and we will repair it free of charge or replace it at no charge, should it become defective under this warranty, providing you submit proof of purchase (sales slip) with the set. During the initial 90 day period after original purchase, we will service or exchange, at no charge, the set that is returned to LENOXX ELECTRONICS CORP.
