® PROGRAMMABLE COMPACT DISC PLAYER MODEL CD-50 OPERATING INSTRUCTIONS PLAYS ALL MUSIC COMPACT DISCS 6 DIGIT LCD VISUAL DISPLAY TRACK REPEAT & DISC REPEAT DELUXE STEREO HEADPHONES INCLUDED USES 4 SIZE AA BATTERIES (NOT INCLUDED) PLEASE READ CAREFULLY BEFORE USE CD-50(70A-0A9)121000 NL v.
LOCATION OF CONTROLS 12 11 10 1 9 2 3 8 4 5 6 7 13 14 1. PHONES JACK (headphone jack) 2. CD DOOR CLOSE AREA 3. VOLUME CONTROL 4. CD DOOR OPEN BUTTON 5. REPEAT BUTTON ) 6. BACKWARD SKIP/SEARCH BUTTON ( 7. FORWARD SKIP/SEARCH BUTTON ( ) 8. LCD VISUAL DISPLAY 9. PLAY/PAUSE AND POWER ON BUTTON 10. STOP AND POWER OFF BUTTON (POWER OFF IS AUTOMATIC AFTER 30 SECONDS) 11. PROGRAM BUTTON 12. CD DOOR 13. BATTERY DOOR 14.
POWER SOURCES Power your CD player by connecting an optional AC ADAPTOR or by inserting 4 size AA fresh alkaline batteries. NOTE: The only AC ADAPTOR suitable for this player is DC 4.5V 600mA, with polarity , others may damage your player. Please check voltage + current (mA) before buying an AC ADAPTOR. Using with batteries Insert 4 size AA alkaline batteries according to the + and - markings on the back cabinet near the BATTERY COMPARTMENT DOOR.
DISC PLAYING 1 Load the disc. Disc 1234 1234 1234 1234 Push here Label side up 2 Press to open Connect the headphones. Stereo headphones To PHONES 3 Press the PLAY/PAUSE button ( TRACK NUMBER CURRENTLY PLAYING ELAPSED PLAYING TIME OF THE CURRENT TRACK PLAY/PAUSE Button 4 Adjust the volume. MAXIMUM ).
Other operations Operation Press Display window shows To pause play TRACK NUMBER CURRENTLY PLAYING PLAYING TIME FLASHES To release pause and resume play TRACK NUMBER CURRENTLY PLAYING PLAYING TIME ADVANCES To stop or To turn off the power TOTAL TRACKS To skip to the next track(s) once (or repeatedly) To skip to the previous track(s) once (or repeatedly) To go ahead at high speed (search) To go back at high speed (search) TOTAL PLAYING TIME Keep depressed and release when the desired music sec
REPEAT PLAY SINGLE TRACK REPEAT Plays one song over and over till you press STOP. SKIP REPE AT During play, select the song you want to repeat with either of the SKIP buttons ( or ), then press the REPEAT button once, the symbol REPEAT 1 appears in the display. x1 The song currently playing will repeat over and over, until you press STOP. REPEAT 1 To resume normal play, press the REPEAT button another two times. REPE AT ALL TRACKS REPEAT Repeats all songs in order, till you press STOP.
PROGRAMMING YOUR PLAYING SEQUENCE PROGRAMMED PLAY The tracks (songs) on the disc can be programmed (arranged in advance) to play in any order you prefer (up to 21 tracks can be programmed). Programming Example: Program Number 1 2 3 4 5 6 7 8 etc. Track Number (song number) 3 5 8 1 2 4 1 1 etc. During CD play, the PROGRAM button functions the same as the REPEAT button. The set must be in stop mode to program it. During programming, the word PGM (program) flashes in the display.
MAINTENANCE Cleaning the lens Handling Compact Discs Dirty, scratched or warped discs A dirty lens will cause sound skipping. If the lens is very dirty, the player may not work. We suggest using a special cleaning disk (not included) available in most music and Hi-Fi stores. However, if you do not have one, you may use the instructions below. Use a cotton swab very slightly dampened with alcohol to clean the lens. Cleaning the cabinet may cause skipping or noise.
SAFETY PRECAUTIONS Do not take the set apart. The laser beam used in the set may harm your eyes. Refer servicing to qualified service personnel only. Do not insert pins or coins, clips, or any objects inside the set. This set is equipped with a safety device which automatically turns the laser beam off when the disc door is opened. Do not drop the set or subject it to strong shocks. Doing so could result in damage.
IMPORTANT INFORMATION REQUIRED BY THE FCC Since the CD circuitry may cause interference to other radios nearby, switch this set off when not in use or move it away from the affected radios. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.
TROUBLE SHOOTING GUIDE Symptoms Tracks do not change or set does not play normally. CD Player will not turn on. Disc will not play. Causes Solutions Batteries are weak (they may test OK on tester but they are weak for CD operation). Replace all the 4 batteries with fresh alkaline batteries. Battery life with fresh batteries is about 16 hours (rechargeable batteries have 1/2 of that life). Dead or weak batteries. Replace all the 4 batteries with fresh ones.
TECHNICAL SPECIFICATIONS CD PLAYER SECTION Frequency response .............................. Wow and flutter ...................................... Sampling frequency ................................ D/A converter ......................................... Error correction method .......................... Pickup ................................................... Laser diode material GaAIAs Laser output less than 44.6µw 20Hz - 20kHz +1 / -2dB Below measurable limits 44.
QUICK INSTRUCTIONS POWERING UP MODEL CD-50 Power your CD player by connecting an optional AC ADAPTOR or by inserting 4 size AA fresh alkaline batteries. NOTE: The only AC ADAPTOR suitable for this player is DC 4.5V 600mA, with polarity , others may damage your player. Please check voltage + current (mA) before buying an AC ADAPTOR. BATTERY OPERATION 1. Open the BATTERY DOOR. 2. Insert 4 size AA fresh alkaline batteries as shown.
QUICK INSTRUCTIONS PLAYING A DISC BASIC FEATURES You can play compact discs that have this logo: 1. Slide the OPEN button to open the CD DOOR. 2. Place a disc on the center post with the label facing up, and then gently push down on the center of the disc until it clicks in. 3. Close the CD DOOR, press the PLAY button, the set starts playing. PAUSE Pressing PLAY/PAUSE button while a disc is playing will pause play (the playing time of the current track will flash).
