User's Manual

POWER SOURCES
Using with batteries
Tips on battery use

Reversing polarities will damage the batteries and possibly your set. Be sure to
follow polarity ( + and - ) as indicated.

Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.),
or old batteries with new ones.

When not in use for an extended period of time, or while internal batteries will not
be used, remove them to prevent possible acid leakage or corrosion resulting in
damage to your player.

When the batteries have become discharged, they must be disposed of in a safe
manner that complies with all applicable laws.

Installation of batteries should only be done by an adult (for safety).
When shows or flashes in the display
If the alkaline batteries are weak and discharged, this symbol   shows or
flashes in the display, then the power automatically turns off. If this occurs, replace
the alkaline batteries (also if display does not show anything, the batteries are
dead).
Alkaline battery life
Bear in mind that battery life expectancy is based upon volume listening levels.
Maximum battery power consumption happens at maximum settings. Typical life
for 4 size AA alkaline batteries is about 16 hours of continuous use.
2
Insert 4 size AA alkaline batteries
according to the + and - markings on
the back cabinet near the BATTERY
COMPARTMENT DOOR.
Power your CD player by connecting an optional AC ADAPTOR or by inserting 4 size
AA fresh alkaline batteries.
NOTE: The only AC ADAPTOR suitable for this player is DC 4.5V 600mA, with polarity
, others may damage your player. Please check voltage + current (mA)
before buying an AC ADAPTOR.