User's Manual

IB-CD511(TA)-SW-E-091002

ATTACHING THE SPEAKERS

1.Position one of the speakers to the right

of the main unit.

2.Align the tracks (rails) on the speaker with

the main unit as shown in FIG. 1.

3.When the speaker tracks (rails) are lined

up, push the speaker into the tracks (rails)

on the main unit as shown in FIG. 2.

4.Repeat steps 1 to 3 above for the left side.

5.Carefully unwind the speaker wire from behind each speaker and insert the

right plug into Speaker Jack R and the left plug into Speaker Jack L (as shown

in FIG. 3). Wrap the remaining wire behind each speaker.

FIG.1

FIG.2

FIG.3

NOTE: This player can be used with the speakers either attached to the main unit

or standing alone so long as both speaker plugs are plugged into the

jacks.

LOCK TAB

To detach the speakers, press the lock tab and push the speakers out of

the tracks (rails).

PROG.