MODEL DVD-1002 • • • • • • PROGRESSIVE SCAN PLAY (FOR TVS WITH APPROPRIATE INPUT JACKS) PLAYS DVD VIDEOS PLAYS ALL AUDIO CDS PLAYS MP3 RECORDED DISCS PLAYS CD-R & CD-RW DISCS PLAYS JPEG PHOTO DISCS PLEASE READ CAREFULLY BEFORE USE IB-DVD1002 (AT)-WM-E-032706 IB-DVD1002(AT)-WM-E-032706.
SAFETY INSTRUCTIONS WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.
SAFETY INSTRUCTIONS Do not apply oil or petroleum products or solvents to any part of this set. FCC NOTE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.
TABLE OF CONTENTS • Getting Started: Safety Instructions ----------------------------------------------------------------------------------------1 Connections ------------------------------------------------------------------------------------------------4 Location of Controls --------------------------------------------------------------------------------------6 Remote Control Operation -----------------------------------------------------------------------------8 Notes on Discs ---------------------------
CONNECTIONS (TV set) Connect your player to TV using one of the 3 diagrams below.
CONNECTIONS (Home Theater System) For theater quality sound, connect the audio cables directly to your home theater system for maximum audio enjoyment. Best Better YOUR TV SET YOUR TV SET YOUR DVD PLAYER Cr/Pr Cb/Pb Y S-VIDEO VIDEO OUT COAXIAL YOUR DVD PLAYER R - AUDIO - L Cr/Pr HOME THEATER SYSTEM WITH 5.
LOCATION OF CONTROLS TOP PANEL PREVIOUS 7 NEXT 6 STOP 5 PLAY PAUSE 4 ON STANDBY 3 2 1. 2. 3. 4. 5. 6. 7. 1 OPEN button - Press to open the door. DISC DOOR - Open and put the DVD disc inside with label side up. ON/STANDBY button - Press to switch the set on or switch to standby (off). PLAY/PAUSE button - Press to start playing a disc or to pause play. STOP button - Stops playing the DISC, press this twice for full stop. NEXT SKIP button - Skips to the next chapter (forwards).
LOCATION OF CONTROLS REMOTE CONTROL ON/STANDBY MUTE 1 2 3 TITLE 11 MENU SETUP 12 STOP 4 6 7 4. / button - Press to skip to previous title, chapter or track / press and hold more than 1 second to fast backward playback. 5. / button - Press to skip to next title, chapter or track / press and hold more than 1 second to fast forward playback. DIRECTION buttons - Used in DVD menus & audio MP3 track selection. OK button - Press to start/pause play or enter a command or confirm a selection.
REMOTE CONTROL OPERATION Battery Installation 1. Push door tab Tips on Battery Use • to open the battery door.. • • • • R ever si ng p ol ar itie s wi ll d amag e th e batteries and possibly your REMOTE. Be sure to follow polarity ( + and –) as indicated. Do not mix different types batteries together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.), or old batteries with new ones.
NOTES ON DISCS Discs that can be played RECORDED CONTENT DISC TYPE & LOGO MARK DVD Video (Region 1) Video + Audio DVD-R Video + Audio “.JPG” or “JPEG” JPEG disc Video only or Audio / Video Audio only Music CD CD-R disc Audio only or Audio / Video CD-RW disc Audio only or Audio / Video MP-3 MP3 disc Audio only NOTE: A hand symbol “ ” may appear on the TV screen when pressing some buttons.
PRECAUTIONS Safety • • Operation As the laser beam used in the DVD player may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only (it is perfectly safe if you don’t unscrew and open the cabinet). Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel before operating it any further.
INITIAL SETTING For the first time use, you may need to set some of the settings and adjustments according to your TV and favorite preferences, but most people will not adjust the following functions and will go directly to Page 15 for basic play. You can adjust the SYSTEM SETUP, LANGUAGE SETUP, AUDIO SETUP and VIDEO SETUP in the menu by following the steps below. 1 In STOP mode, press the SETUP button on the remote control, a SETUP menu like this will appear on the TV screen. 2 Use these selection.
INITIAL SETTING Selecting the TV TYPE Select the aspect ratio of the movie to match your TV set. There are three types of screen sizes you may select. (NOTE: If your DISC is not encoded to allow you to change the aspect ratio, the TV display cannot be changed.) 1 2 3 4 5 In STOP mode, press the SETUP button on the remote control, “ ” (System Setup) is selected. Press button and use “TV TYPE”. button and use Press your preferred option.
INITIAL SETTING LANGUAGE SETUP (On Screen Display, AUDIO, SUBTITLE & MENU) These items allow you to preset the OSD language (OSD = On Screen Display), audio language, subtitle language, and menu language that will always be used for every disc (the language selected is available). 1 In STOP mode, press the SETUP button on the remote control, “ ” (System Setup) is selected. 2 3 Use 4 button and use / Press your preferred language. 5 6 LANGUAGE SETUP button to highlight “ A B ” (Language Setup).
INITIAL SETTING Setting the Downmix Audio Out Downmix audio output setup allows you to select LT/RT or STEREO audio output mode. 1 In STOP mode, press the SETUP button on the ” (System Setup) is selected. remote control, “ 2 3 Use 4 5 6 button to highlight “ AUDIO SETUP ” (Audio Setup). Press button and use “DOWNMIX”. button to highlight DIGITAL OUT DOWNMIX A B LT/RT STEREO EXIT SETUP button and use Press “LT/RT” or “STEREO”. / buttons to select TO SET PRESS Press the OK button to confirm.
1. BASIC PLAY 1 After completing all of the audio and video cable connections, turn on your TV and set it to the correct video-in channel (for more information, please see box below). 2 Plug the player’s AC power cord into an AC wall outlet and press ON/STANDBY button on the player or on the remote control. 3 Press the OPEN button on the DVD player to open the disc door. Place a disc gently on the tray (lable side up) and close the door by pushing it down.
2. USING THE SEARCH & SKIP FUNCTIONS During play, you can search quickly through a chapter or track or use the skip function to jump to the next selection.
3. REPEAT PLAY For CD REP: [REP 1] A-B CANCEL REP: [REP ALL] REP: [OFF] REPEAT A - REPEAT A-B For MP3 REP: [REP 1] REP: [REP DIR] REPEAT A-B A-B CANCEL REP: [REP ALL] REP: [OFF] REPEAT A - 4. PROGRAMMED PLAY You can make a program of up to 16 tracks in the order you want them to be played during the STOP mode. This feature can be used on CD and MP3.
5. SEARCH FOR PREFERRED PLAY To select a scene with the title, the chapter, the track number and the time during play. 1 Press the SEARCH button during play, the screen will show as on the right: 2 Move the LEFT & RIGHT DIRECTION & ) and press the numeric buttons ( buttons on the REMOTE to select the title, the track, or the time, then press the OK button to confirm.
(JUST FOR DVD) 7. SLOW-MOTION PLAY A disc can also be played in slow-motion. 1 Each time you press and hold the ZOOM/SLOW button during play, the playback speed will change as follows: SF 1/4 SF 1/2 SF 1/6 PLAY Y 2 Press OK button to resume normal play from any slow-motion mode. NOTE 1: Sound will be silent during slow motion play. NOTE 2: SF stands for SLOW FORWARD. 8.
11.DISPLAYING DISC INFORMATION If you want to know the information of the disc during play, press the DISPLAY button on the remote control, the information will appear on the TV screen. (see below) For DVD DVD TT 1/2 CH 6/12 o)): 1/3ENG 5.1CH The information about the title/chapter number and chapter elapsed time. 00:02:35 2/3ENG The information about the AUDIO, SUBTITLE and ANGLE. OFF DVD TT 1/2 CH 6/12 C-00:06:41 The information about the chapter remaining time.
12. MP3 DISC OPERATION This allows you to play your MP3 recorded disc on this set. 1 Load your recorded MP3 disc into the player, a menu will show on the screen. [MP3]01-------MP3 01.MP3 2 3 4 5 6 7 8 01.01 02.02 03.03 04.04 05.05 06.06 07.07 08.08 09.09 10.10 Select the desired file by pressing the or button. Press OK button to open the file and start playing. Select the desired track by pressing the or button. Press OK button to start playback.
TROUBLE SHOOTING Remedy Symptom No power. Insert the AC power plug securely into the power outlet. Make sure your outlet has power. Check the outlet with a lamp. 1. The disc may be damaged or scratched. • Play fails to start even 2. This player cannot play a DVD disc other than region 1 standard. when OK is pressed. • Play starts but then stops immediately. General No picture. 3. The disc may be dirty and may require cleaning. 4. Ensure that the disc is installed with the label side up (facing you).
TROUBLE SHOOTING DVD General Symptom Remedy No button operates (on the main unit and/or the R EM OT E CONT ROL unit). Press the ON/STANDBY button on the remote to set the player to the standby mode and then press the ON/STANDBY button again to turn the player to ON. Reset the DVD player by disconnecting the power plug and then re-connecting it (the player may not be operating properly due to lightning, static electricity, damaged or wrong discs, or some other external factors).
GLOSSARY Title The longest sections of a picture or a music piece on a DVD, or a movie, etc., for a picture piece on video software; or an album, etc., for a music piece on an audio software. Each title is assigned a title number enabling you to locate the title you want. PAL Phase Alternation Line: a video standard used in Europe. YUV A video standard, it can optimize the translation of the Video, Y means Luminance, U and V mean chrominance.
SPECIFICATIONS General Description Power source: AC 100 – 240V, 50/60Hz Power consumption: 15 Watts [normal household current] (approx. 5W when the set is in the standby mode). Signal system: NTSC/PAL TV system Video output level: 1 Vp-p Audio output level: 2 Vrms (1 kHz, 0dB) Dimensions (Approx.): Width: 251 mm Depth: 171 mm Height: 48 mm Weight: 0.8 kg 9 7/8" 6 3/4" 1 7/8" 1.
LIMITED WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a period of 1 year after purchase, and we will repair it free of charge or replace it at no charge, should it become defective under this warranty, providing you submit proof of purchase (sales slip) with the set. During the initial 1 year period after original purchase, we will service the set that is returned to LENOXX ELECTRONICS CORP., prepaid, at no charge.