The Perfect Sound System for Your DVD Player • Just add your TV & DVD player; everything else is in the box • Incredible surround sound, perfect for DVD viewing & enhanced TV game experience • Also provides exceptionally great sound for your computer & MP3 player • Front panel audio input jack for MP3 & CD players PLEASE READ CAREFULLY BEFORE USE IB-HT3917-WM-E-041506
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.
Thank you for purchasing this 5.1 Channel Home Theater Surround Sound System. This deluxe audio theater system turns your home into a virtual theater. Basic Features & Benefits of this Home Theater System: 1. 5.1 channel audio decoder for home theater surround sound. 2. Includes audio inputs for your DVD player and AUX (any audio device) and AUDIO INPUT jack on the front. 3. Powerful subwoofer provides real BOOM in your bass. 4. Deluxe easy-to-use remote control with batteries included. 5.
• Getting Started Safety Instructions----------------------------------------------------------------------------------------------------------------------------------- 1 Introduction---------------------------------------------------------------------------------------------------------------------------------------------- 2 Location of Controls--------------------------------------------------------------------------------------------------------------------------------- 4 Remote Control Operation--------
1. ON/STANDBY button - In POWER ON mode, press to switch the set to on or to standby mode. CONTROL PANEL (ON THE FRONT OF THE SUBWOOFER) 1 2 4 3 SENSOR 5 SOURCE 2. ON/STANDBY indicator - This indicator flashes slowly in red when the set is in the standby mode; Flashes in green confirming you pressed any button on the main unit or on the remote control and is steadily on in green when the set is on. 6 VOLUME ON STANDBY 3.
1. IR DIODE - Sends the signal to the set. Do not block or cover this. REMOTE CONTROL 1 2 2. ON/STANDBY button - Switches the player from STANDBY to ON or ON to STANDBY (if the main POWER of the set is ON). 3. SOURCE button - Press to select the sound input source you want: DVD IN, AUX IN or AUDIO IN. 4. RESET button - Press to adjust all speakers’ output to the factory’s default settings. 5 3 6 4 5. MUTE button - Instantly turns off the sound. Press again to restore the sound. 7 6.
Battery Installation Remote Control Operating Range Point the REMOTE CONTROL unit within 20 feet from the remote control sensor and facing the front of the HOME THEATER SYSTEM. 1. Gently push the door and slide to open the BATTERY DOOR. 2. Insert 2 size “AAA” alkaline batteries (included) into the battery compartment according to the “ + ” and “ – ” markings inside the battery compartment.
Connect the supplied speaker system by matching the colors of the terminals to those of the cords. The speaker wires and connectors are color-coded for easier set up. FRONT RIGHT SPEAKER FRONT LEFT SPEAKER R L DVD IN NOTE: • Connect the Front Left speaker to the Front Left terminals (red + black). • Connect the Front Right speaker to the Front Right terminals (red + black). • Connect the Center speaker to the Center speaker terminals (blue + black).
To avoid short-circuiting the speakers Make sure the stripped end of each speaker wire does not touch another speaker terminal or the stripped end of another speaker wire. Examples of poor connection of the speaker wires LOOSE WIRE STRAND TOUCHING (This will short out the sound) WIRES SHORTED TO EACH OTHER (This will short out the sound) • Stripped speaker wire is touching another set terminal.
Home Theater System + Tape Recorder/Player / AM/FM Tuner + TV OR YOUR TAPE RECORDER/PLAYER R L DVD IN OR AUX IN YOUR AM/FM TUNER OR R and L stand for RIGHT channel and LEFT channel YOUR TV SET This will allow the sound of the tape recorder/player, AM/FM tuner or TV to be played through the HOME THEATER SYSTEM.
Home Theater System + TV + Satellite SATELLITE RECEIVER / CABLE BOX AUDIO OUTPUT R OUT TO TV SATELLITE IN L DVD IN AUX IN CABLE OR ON AIR ANTENNA/ SATELLITE SIGNAL RF (coaxial) cable unchanged, same as before VIDEO IN ANT IN This will allow the sound of satellite to be played through the HOME THEATER SYSTEM, and you will hear the sound from both the TV and the HOME THEATER SYSTEM, this is normal. Home Theater System + CD / MP3 / PC / Radio or other Source with 3.
ON/STANDBY button ON/STANDBY indicator Remote sensor SOURCE button MASTER VOLUME buttons R L DVD IN AUX IN OUTPUT SPEAKER TERMINALS 4 LEFT FRONT RIGHT LEFT REAR RIGHT + T 1.25AL/250V POWER switch AC power plug General 1 After completing all SPEAKER and AUDIO connections, plug the AC power plug into a 120V 60 Hz wall outlet and flip POWER switch on the back of the main set to ON position, the system enters STANDBY mode and the ON/STANDBY indicator will flash in red.
7 To momentarily shut off the sound, press the MUTE button and the ON/STANDBY indicator will flash in green continuously. Press the MUTE button again or press the MASTER VOLUME buttons to restore the sound and the ON/STANDBY indicator will stop flashing and be steadily on in green. 8 To select the listening mode, press the CHANNELS button on the REMOTE CONTROL. NOTE: The factory’s default input source is DVD with 5.1 channel sound output.
Remedy Symptom No power. 1. Is the power cord firmly plugged into the power outlet? Insert the AC power plug securely into the power outlet. Make sure your outlet has power, you can check this by plugging a lamp into the outlet to see if it works. 2. Is the main power switched to off? Flip it to ON. 3. One of the safety mechanisms may be operating. In this event, unplug the player from the power outlet briefly and then plug it in again to reset the set. 4. Your set’s fuse may have blown. 5.
General Power requirements ----- AC 120V, 60Hz Power consumption ------60 Watts Main set Dimensions ---- 6 7/8 x 9 1/4 x 11 1/2 inches / 17.4 x 23.5 x 29.2 cm Weight -----------------------7.7 lbs / 3.5 kg Audio Power Output Total output power: 40Watts (THD 10%), 60 Watts (Maximum) Distortion 0.06% @ reference output Remote Operating Range Within 20 feet between the main set and the remote. Replacement Fuse Time delay 1.25 Amp T type (slow blow) glass fuse 250V.
