User Guide
IB-HT400-WM-E-110502
Home Theater System + TV + DVD Player
13
TV + DVD CONNECTIONS
1. Insert the COAXIAL cable (included) into the DVD INPUT jack on the back of your HOME THEATER SYSTEM,
and into the DIGITAL (COAXIAL) jack on your DVD player, this will allow your DVDs Dolby Digital audio or DTS
sound to play through your HOME THEATER SYSTEM.
NOTE: For a Dolby Digital or a DTS (5.1 channel) recorded DVD disc, the sound will come out of all 5 speakers
plus the subwoofer. For a Stereo DVD disc (2 channel), the sound will only come out of the 2 front speakers
plus the subwoofer. This set will decode and automatically play back whatever sound system was recorded
on the DVD or audio disc. To manually change stereo (2 channel) audio to Dolby Pro Logic, press the
SURROUND button. The sound will come out of all 5 speakers plus the subwoofer.
NOTE: Make sure your DVDs AUDIO OUTPUT is set to DIGITAL.
2. Insert the video cable into the VIDEO OUT jack on the back of your DVD player, and into the VIDEO IN jack on
your TV (this may be already connected from before).
3. Insert the AC power cord into an AC outlet.
4. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
5. Press the SOURCE button several times till the DVD indicator lights.
6. Make sure your DVD player is on and follow your DVD players instructions.
7. Go to Page 20 for detailed instructions.
NOTE: Your cable or antenna connection to your TV are not touched with this connection. Leave your antenna cable
to your TV as you normally would. No changes will be made to your current antenna connections.
YOUR DVD PLAYER
YOUR TV SET
BACK OF HT-400
HOME THEATER
NOTE: On some TVs, this
jack is in the front.
VIDEO CABLE
(INCLUDED)
COAXIAL CABLE
(INCLUDED)
NOTE:For DVD viewing, your DVDs
Video cable must go to your
TV sets VIDEO input jack.
NOTE: Some newer TV sets have several VIDEO
INPUT jacks. You may use one of these for
your DVD player and the others for
connecting to the VIDEO OUT jack (for TV
game use). If your set is older and only
has a single VIDEO INPUT jack, you may
buy a switch box to change video inputs
from DVD to game video out (Game), etc.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
IB-HT400-WM-E-110502.p65 11/5/02, 3:28 PM14