User Guide
IB-HT400-WM-E-110502
1. Insert the stereo audio cables into the AUDIO INPUT L (left=white) and R (right=red) jacks on the FRONT of your
HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your VIDEO CAMERA, this will allow
your CAMERA VIDEOs sound to play through your HOME THEATER SYSTEM. (NOTE: Many video cameras have
special plugs on one side to connect to your camera.)
2. Insert the video cable (included with your VIDEO CAMERA) into the VIDEO IN jack on the FRONT of your HOME
THEATER SYSTEM, and into the VIDEO OUT jack on your VIDEO CAMERA. (NOTE: Your video camera may have a
3.5mm triple jack, consult your cameras booklet for details.)
3. Insert the video cable (included) into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM, and into the
VIDEO IN jack on your TV. (You may have to change it later for DVD use unless your TV set has several video inputs.)
NOTE: Your VIDEO CAMERAs sound will come out of the 2 front speakers plus the subwoofer since the default
setting for the sound output is the same as the audio source from the VIDEO CAMERA (2 channel,
STEREO). For Dolby Pro Logic (5.1 channel) sound reproduction, press the SURROUND button. The sound
will come out of all 5 speakers plus the subwoofer.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the GAME indicator lights. (This setting is either for a Video Camera or a
TV Game.)
7. Make sure your VIDEO CAMERA is on and follow your VIDEO CAMERAs instructions.
8. Go to Page 20 for detailed instructions.
TV + VIDEO CAMERA CONNECTIONS
17
Home Theater System + TV + Video Camera
BACK OF HT-400
HOME THEATER
YOUR TV SET
FRONT OF HT-400
HOME THEATER
YOUR VIDEO CAMERA
NOTE: Your VIDEO CAMERA
may have a special cable (with a
triple 3.5mm plug on one side)
for connections. This diagram is
only for illustrations.
NOTE: On some TVs, this
jack is in the front.
NOTE: When also connecting a DVD player, you will
need to remove the video cable from video
out and connect the DVD player to your TVs
video input. Some newer TVs have several
video inputs on these sets, you may leave
both cables connected to your TVs video input.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
NOTE: Some newer TV sets have several VIDEO
INPUT jacks. You may use one of these for
your DVD player and the others for
connecting to the VIDEO OUT jack (for TV
game use). If your set is older and only
has a single VIDEO INPUT jack, you may
buy a switch box to change video inputs
from DVD to game video out (Game), etc.
IB-HT400-WM-E-110502.p65 11/5/02, 3:28 PM18