3 MEMORY SPEAKERPHONE MODEL: PH-323 OPERATING INSTRUCTIONS SPEAKERPHONE WITH LED INDICATOR HANDS-FREE HEADSET INCLUDED 13 MEMORY TELEPHONE (3 ONE-TOUCH & 10 TWO-TOUCH) TONE/PULSE SWITCHABLE DIALING RECEIVER VOLUME CONTROL FLASH & REDIAL/PAUSE BUTTON DESK OR WALL MOUNTABLE HOLD BUTTON WITH INDICATOR PLEASE READ CAREFULLY BEFORE USE IB-PH323(MS)-WM-E-051003 IB-PH323(MS)-WM-E-043003.
IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury: 1. Read and follow all instructions and warnings. 2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a slightly dampened cloth only. 3.
IMPORTANT TELEPHONE COMPANY & FCC INFORMATION CAUTION: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL INJURY, DO NOT OPEN CABINET. WE SUGGEST THAT YOU REVIEW THE FOLLOWING INFORMATION PROVIDED BY THE FCC (FEDERAL COMMUNICATIONS COMMISSION). FCC REGISTRATION This telephone set is registered with the FCC based upon compliance with Part 68 of its rules.
INTRODUCTION This new PH-323 telephone has all the features of a 13 memory telephone. HEADSET - Allows you to type and talk hands-free. SPEAKERPHONE - Allows you to make or answer phone calls hands-free, so that you can work while carrying on conversation. 3 ONE-TOUCH SPEED DIAL BUTTONS - For emergency or other frequently dialed numbers. 10 MEMORY SPEED DIALING - Dials 10 stored numbers in tone or pulse.
CAUTION: This product is an electrical device and can be hazardous if immersed in water. To avoid the possibility of electrical shock, do not use it while in the bathtub or shower or when you are wet. If you accidentally drop it into water, first unplug its cord from the modular jack, then remove the equipment from the water.
LOCATION OF CONTROLS 5 4 3 6 7 8 2 1 9 10 20 19 18 17 16 15 5 6 13 12 11. SPEAKERPHONE/HEADSET VOLUME CONTROL - ADJUSTS SPEAKER OR HEADSET VOLUME 12. MEMORY STORE BUTTON - STORES YOUR NUMBERS INTO MEMORY 13. FLASH BUTTON - FOR CALL WAITING OR NEW DIAL TONE 14. HEADSET JACK - INSERT THE HEADSET PLUG HERE TO USE THE HEADSET 15. REDIAL/PAUSE BUTTON - QUICKLY REDIALS THE LAST NUMBER YOU DIALED / MAKES A PAUSE IN DIALING A NUMBER 16. MUTE BUTTON 17. SPEAKERPHONE MICROPHONE 18.
INSTALLATION INSTRUCTIONS INSTALLATION TELEPHONE BASE HANDSET STRAIGHT TELEPHONE CORD To Telephone Jack COILED HANDSET CORD 1. Insert the modular plugs of the COILED HANDSET CORD into the jack of the TELEPHONE HANDSET and into the jack on the left side of the TELEPHONE BASE. 2. Insert the modular plugs of the STRAIGHT TELEPHONE CORD into the modular jack at the REAR of the TELEPHONE BASE and into the TELEPHONE WALL JACK (either end can be plugged in).
INSTALLATION INSTRUCTIONS HEADSET CONNECTION Connect the plug of the HEADSET into the HEADSET jack on the right side of the phone. NOTE: This phone may be used in 3 ways: 1. Normal handset; 2. Speaker telephone; 3. Hands-free headset. To use the HEADSET: 1. Insert the HEADSET plug into the HEADSET jack described as above. 2. Press the SPEAKERPHONE/HEADSET button to get a dial tone. 3. Adjust the volume of the HEADSET by sliding the VOLUME control on the right side of the set.
SPEAKERPHONE & HEADSET HANDS-FREE TELEPHONE OPERATION NOTE: When using the phone for the first time after installation, before using speakerphone or headset (hands-free operation), pick up the handset first. ANSWERING CALLS WITH SPEAKERPHONE 1. When the phone rings, press the SPEAKERPHONE button, it is not necessary to lift the HANDSET. 2. Adjust the VOLUME control on the right side of the phone. 3. When you finished the conversation, press SPEAKERPHONE / HEADSET again. MAKING CALLS WITH SPEAKERPHONE 1.
MEMORY DIALING You can quickly dial the numbers you stored into the 3 one-touch speed dial buttons or 10 two-touch speed dial memories. Storing phone number into memory For 3 one-touch dialing: For 10 two-touch dialing: 1. Press the SPEAKERPHONE / HEADSET button (the indicator will light), or pick up the handset. 2. Press the STORE button. 3. Dial the phone number you want to store. You can store up to 15 digits. 4. Press one of the 3 one-touch speed dial buttons (M1 to M3).
WALL MOUNTING The set can be mounted on a wall phone plate. If you do not have a modular wall phone plate installed, we recommend that you consult with your telephone company or installer to get one, or turn to page 11 for instruction. 1. Reversible HANDSET HOLDER - When the telephone is mounted on the wall, the REVERSIBLE HANDSET HOLDER must be adjusted so it will hold the handset. 1.SLIDE OUT 2.REVERSE 3.REPLACE INTO PHONE 2.
WALL MOUNTING 3. Snap WALL MOUNT ADAPTOR into bottom of phone as shown on adaptor (UP pointing to top of phone). FOR WALL USE PUT ADAPTOR HERE 4. The longer wire about 7" plugs into the back of phone, leave the other end out showing about 3" of wire. Plug the 3" wire into wall jack. 5. Put phone over wall plate, make sure both posts fit into slots on the back of phone. Then push down to lock phone onto wall plate.
CLEANING AND MAINTENANCE 1. Keep the phone away from bathtub, water or very high heat and humidity (keep away from stove or radiators). 2. Avoid placing it in very hot sun. 3. Do not staple phone cord. 4. Do not, under any circumstances, disassemble the telephone without disconnecting the cord from the telephone line first. Ringer voltages can be high and dangerous. 5. Cleaning the exterior surface of the set should be done on a regular basis.
LIMITED WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a period of 1 year after purchase and we will repair it free of charge or replace it at no charge, should it become defective under this warranty, providing you submit proof of purchase (sales slip) with the set. During the initial 1 year period after original purchase, we will service or exchange, at no charge, the set that is returned to LENOXX ELECTRONICS CORP.
