® 3 CD HOME STEREO AM/FM DUAL CASSETTE RECORDER WITH REMOTE CONTROL MODEL SL-6703 OPERATING INSTRUCTIONS PROGRAMMABLE CD PLAYER WITH REPEAT PLAY FLUORESCENT MULTI-COLOR VFD DISPLAY INCLUDES MULTI-FUNCTION REMOTE CONTROL DIGITAL KARAOKE SYSTEM RECEIVES AM/FM STEREO BROADCASTS EASY TO OPERATE CONTROLS RECORDS FROM CD, TAPE OR RADIO DELUXE DYNAMIC SPEAKER SYSTEMS PLEASE READ CAREFULLY BEFORE USE IB-SL6703(TA)-PRADO-E-091802
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4.
CONNECTING THE AC POWER CORD Insert one end of the supplied AC power cord into the socket located at the back of the set, and the other end to the wall outlet. AC SOCKET TIP If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. The plugs are polarized and only fit one way into the wall outlet and back of the set. To a wall outlet ATTACHING THE SPEAKERS 1.Bring one of the speaker to the left side of the set. 2.
REMOTE CONTROL You can control the CD PLAYER with the provided REMOTE CONTROL (including the functions of POWER ON/OFF, MUTE, CONTINUOUS PLAY, DISC CHANGE, VOLUME control, CD REPEAT and PLAY features). NOTE: When you use the REMOTE CONTROL to operate the CD PLAYER, make sure the POWER switch on the main set is turned on, otherwise, the REMOTE CONTROL will have no functions to the set. 1 10 2 9 3 4 8 5 7 6 1. POWER ON/OFF 2. MUTE 3. CONTINUOUS PLAY 4. DISC CHANGE 5. REPEAT - ONE & ALL SONGS 6.
PLAYING A CD 4 3&5 1 2 6 7 Connect the supplied AC power cord (see page 3). 1 2 Press the POWER switch, the VFD display will turn on. Slide the FUNCTION switch to CD position, the disc tray will be automatically set to DISC 1 position and read the disc on it, will show on the VFD display. 3 Open the CD DOOR by pressing the OPEN/CLOSE button and place the CD in the NO.1 disc compartment. The label side of the CD should face upward. 4 Press the DISC CHANGE button to revolve the tray clockwise.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS DISC buttons DISC CHANGE TIP When CD play is paused, will flash and no music will play. FUNCTION SWITCH To Press or Adjust Adjust the volume VOLUME control Stop playback To resume play, press the PAUSE button again, will stop flashing and music will play. TIP If you bump the set or the table it is sitting on, during CD play, the music will stop or skip for a few seconds. This is normal for this type of player.
REPEAT PLAY PLAYING CD SONGS (TRACKS) OVER AND OVER You can play CD tracks over and over in normal or programmed play modes (see page 8). REPEAT POWER SWITCH FUNCTION SWITCH 1. 2. 3. 4. Press the POWER switch, the display will light up. Set the FUNCTION switch to CD position. Select the track by pressing or , and then press Press the CD REPEAT button. To repeat Press a single track (song) Press the REPEAT button once Display shows REP will flash.
PROGRAMMED CD PLAY SELECTING YOUR OWN MUSIC PLAYING ORDER You can make a program of up to 15 tracks to play in the order you want them to be played. NOTE: Programming is only done during stop mode. PROGRAM 1 During STOP mode, press the PROGRAM button. PRG. will flash in the display. 2 Press the SKIP/SEARCH buttons either or until the desired track shows in the display. 3 Press the PROGRAM button to confirm, PRG. will flash in the display.
LISTENING TO THE RADIO 1 FM MODE 4 2 6 3 Connect the supplied AC power cord (see page 3). 1 2 3 4 5 6 Press the POWER switch, the VFD display will turn on. Set the FUNCTION switch to RADIO position. Set the BAND switch to the proper band position (AM or FM), and set the FM MODE switch to STEREO or MONO. Tune into the station you prefer using the TUNING control. Adjust for the clearest sound. This indicator will light up when receiving FM Stereo broadcasts.
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS FM MODE FUNCTION TIP • If the FM broadcast is noisy, set the FM MODE switch from STEREO to MONO. set has an electronic volume control, you may raise or lower the volume by pressing the VOLUME UP and DOWN buttons. VOLUME To Press or Set Adjust the volume VOLUME control (UP or DOWN). Turn off the Radio Set the FUNCTION switch to TAPE position or press the POWER switch.
PLAYING A TAPE 1 4 2 3 Connect the supplied AC power cord (see page 3). 1 Press the POWER switch, the VFD display will turn on. 2 Set the FUNCTION switch to TAPE position. STOP/EJECT 4 PLAY 5 AUTO STOP Press the STOP/EJECT button (DECK A or DECK B) to open the tape compartment and insert a recorded tape. Close the door. EM PTY REEL A 3 F U LL REEL IN S E R T T H IS W AY Press the PLAY button. The player turns on and starts playing.
RELAY PLAY 1 5 2 4 3 Connect the supplied AC power cord (see page 3). To play tapes in DECK A and then DECK B, follow the steps below: 1 Press the POWER switch, the VFD display will turn on. 2 Set the FUNCTION switch to TAPE position. 3 Press the cassette PLAY button on DECK A, DECK A will play. PLAY 4 Press the cassette PAUSE button on DECK B. PAUSE 5 PLAY 6 Press the cassette PLAY button on DECK B. When DECK A finishes playing, DECK B will start playing automatically.
USE THESE BUTTONS FOR CASSETTE TAPE OPERATIONS ADDITIONAL VOLUME CONTROL RECORD PLAY PAUSE PAUSE PLAY STOP/EJECT STOP/EJECT REWIND & FAST F. REWIND & FAST F. PHONES JACK To Press or Adjust Adjust the volume Press the VOLUME button ( UP or DOWN) Stop playback STOP/EJECT button Fast forward or rewind the tape FAST FORWARD REWIND button Pause playback PAUSE button Press again to resume play after pause.
RECORDING ON A TAPE 1 4 MICROPHONE JACK 5 3 2 Connect the supplied AC power cord (see page 3). 1 Press the POWER switch, the VFD display will turn on. 2 STOP/EJECT 3 Press the STOP/EJECT button (DECK B) to open the tape compartment and insert a blank tape. Select the program source (MW, FM, CD, or microphone) you want to record. OK NO To record from the CD player, set the FUNCTION switch to CD position, insert a CD and follow the steps to play a CD (see page 5).
USE THESE BUTTONS ADDITIONAL OPERATIONS FOR TIP • • To erase a recording, just start a new recording, and the old one is automatically replaced. see page 19 for notes on cassettes. DUBBING SPEED SWITCH STOP/EJECT PAUSE To Press or Set Stop recording STOP/EJECT button Pause recording PAUSE button Press the button again to resume recording. Adjust recording speed when copying tapes DUBBING SPEED switch from NORMAL to HIGH speed.
SINGING ALONG WITH KARAOKE FUNCTION MICROPHONE JACK 2 VOLUME Connect the supplied AC power cord (see page 3). 1 Insert microphone plug into the microphone jack. To avoid mic howling, lower the volume level setting first. NOTE: Microphone is not included, you may purchase a microphone where you bought this set. 2 To sing along with the CD player, set the FUNCTION switch to CD position, insert a KARAOKE CD disc and follow the steps to play a CD (see page 5).
USE THESE OPERATIONS BUTTONS TONE FOR ADDITIONAL VOLUME CONTROL To Press or Adjust Adjust the MIC volume VOLUME control Adjust the CD or TAPE music volume VOLUME control Intensify bass Rotate the TONE control counterclockwise Intensify treble Rotate the TONE control clockwise TIP: If there is squealing or howling (feedback) noise during KARAOKE use, move the microphone away from the speakers or turn down the volume.
PRECAUTIONS On Safety On Operation the laser beam used in the CD If the set is brought directly from a As player section may be harmful to the cold to a warm location, or is placed eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. any solid object or liquid fall Should into the set, unplug the player, and have it checked by qualified personnel before operating it any further.
PRECAUTIONS (continued) Notes on Cassettes Notes on CDs playing, clean the CD with a Break off the cassette recording tabs Before from side A or B to prevent accidental cleaning cloth. Wipe the CD from the recording. center out. Side A not use solvents such as benzene, Do thinner, commercially available Tab for side B cleaners or anti-static spray intended for vinyl LPs.
MAINTENANCE Cleaning the Tape Heads Notes for Storing Wipe the heads, the pinch roller and Cassette Tapes the capstan with a cleaning swab slightly moistened with cleaning fluid or alcohol after every 10 hours of operation for optimum playback and recording quality. After cleaning, insert a tape when the areas cleaned are completely dry. COTTON SWAB ERASE HEAD 1. Do not put a tape near a magnetic field, such as a TV, or speaker. Magnetic fields may reduce the tape sensitivity or even erase the recording.
TROUBLE SHOOTING Problem General The power is not on There is no sound VFD display does not light up CD player appears in the display even when a CD is in place CD does not play The sound drops out Radio CD does not play while radio may continue to play AM sound is weak or has poor quality FM is weak Tape player The RECORD button does not function/The tape does not play The tape does not erase completely The tape does not record The sound is weak/The sound quality is poor Cassette PLAY butto
SPECIFICATION General Description Power source: AC 120V, 60Hz 28Watts DC 2 size AAA batteries for Remote Control (Alkaline batteries are recommended) Speakers (2 ways): and 2 - 5 4 ohm woofers 2 - 3 4 ohm tweeters with crossover Output power: 5.0W/channel Dimensions: Unit Width: 11 Depth: 18 15 / 16 Height: 12 13 / 16 Weight: 10LBs CD Section Plays disc type: Speaker Box Width: 8 1/ 8 Depth: 11 1 / 8 Height: 12 13 / 16 Weight: 3.
LIMITED WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a period of 90 days after purchase and we will repair it free of charge or replace it at no charge, should it become defective under this warranty, providing you submit proof of purchase (sales slip) with the set. During the initial 90 day period after original purchase, we will service or exchange, at no charge, the set that is returned to LENOXX ELECTRONICS CORP.