User Manual

5
PHONO & ENCODING
NOTED:
- INSTALL THE DUST COVER INTO HINGE ON THE UPPER CABINET.
- SET THE TURNTABLE PLATTER ONTO THE CENTER SPINDLE.
- ATTACH THE DRIVE BELT: POSITION THE BELT ON THE MOTOR PULLY, THE DRIVE BELT IS TIGHTENED
UNDER THE TURNTABLE PLATTER.
- PRESS FUNCTION BUTTON TO SELECT “PHONO” ON DISPLAY.
- REMOVE THE STYLUS PROTECTOR.
- BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM REST PART BEFORE
OPERATING AND RE-SECURED AGAIN AFTERWARDS.
- PUSH THE LIFT LEVER UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, AND THEN SLOWLY
MOVE IT TO THE RECORD SIDE. THE PLATTER WILL START TO ROTATE.
- PUT DOWN THE LIFT LEVER TO DROP THE TONE ARM AND TOUCH THE RECORD GENTLY. PHONO
PLAYING STARTS NOW.
- PUSH THE LIFT LEVER UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, NOW PLATTER WILL
STILL BE ROTATING BUT PHONO PLAYING WILL STOP. TO CONTINUE THE PLAYING, THE USER NEEDS
TO PUT DOWN THE LIFT LEVER.
- REPEATEDLY PRESS 33 / 45 / 78 SPEED SELECTOR TO SELECT CORRECT SPEED, DIFFERENT COLORS
IN LIGHTING MEANS DIFFERENT SPEED AS BELOW:
 33 RPM: RED COLOR
 45 RPM: GREEN COLOR
 78 RPM: BLUE COLOR
- PRESS START / STOP BUTTON ON THE TOP PANEL, TURNTABLE WILL STOP ROTATING GENTLY. PRESS
START / STOP BUTTON AGAIN, TURNTABLE WILL ROTATE AGAIN.
- STROB DOTS ON THE TURNTABLE PLATTER FOR SPEED CHECKING, FIRST ROW FOR 33RPM, SECOND