Safety Instructions

lithium pack
rcB 1200 / rcB 1800 Manual Master Englisch A17
Project No.: 1508 page 9 / 11 issued: 30.04.2014
Distribute to: SturiaTronic, meinrad.cc, cunabo, Lenz, Supplier, SGS updated: 18.08.2022
arranged: P.Greisdorfer, Ph. Maier, G.Kremer
File Name: lithium pack rcB 1200 rcB 1800 Manual Master Draft for FCC ENG A17.docx
REMOTE CONTROL
The lithium packs rcB 1200 / lithium packs rcB 1800 can be controlled via the Lenz heat app* for
smartphones. The lithium packs must be in “Pairing Mode” to be able to couple them properly with the
smartphone.
Pairing Mode
Please switch the desired lithium packs to “Pairing Mode”. For this purpose, push the control button (Fig.
1.3.) for approx. 10 seconds until the heat setting displays (Fig. 1.2.) are blinking and then immediately
release the control button. The heat setting display in the middle is flashing constantly.
Note: The Pairing Mode remains active for 2 minutes! If no pairing takes place during this time, this
mode will end automatically!
*The optional Lenz heat app for convenient control is available for download via the Android Play Store and
the Apple Store.
HEATING POWER - HEATING PERIOD
For heating power and heating period data, please see the table on the product packaging. You can also
access the data online at www.lenzproducts.com
The heating period per charge depends on the selected heating level, the ambient temperature, the lithium
packs and the charge state as well as age of the lithium packs.
LED, steady on – Pairing Mode