User Manual

Appendix
8-3
 BA2131EN
8.3 Glossary
Technical term Meaning
Acknowledgement Acknowledgement of a setting or change (e. g. of parameters))
Application as directed:
Appropriate use of the machine according to the manufacturer’s information or to common use because of its design and function.
inappropriate
The use of the machine which does not comply with the manufacturer’s declaration.
Baud rate Transmission speed of data in bit/s
Bus participant Unit which communicates with the host via the bus
Bus terminal Network node between long-distance and peripheral bus
Code For input and display (access) of parameter values.
Code number/code Clear labelling of a parameter, e.g. C0106. For the calculation rules see the Lenze code addressing in chapter “Parameter setting“,
page 6-1.
Controller General term for servo drives, frequency inverters and DC drives
Cycle time The cycle time of the communication system is the time required for the exchange of all process data between the host and the
field units (e.g. controllers).
Data format Data description, consisting of the components data structure and data type. The data formats of the DRIVECOM parameters are
described in chapter 6.
Distributed peripherals (DP) Input and output units which are serially connected with the central control.
DP master (class 1) The DPmaster, which transfers user data bymeans of the assigned DPslave.
DP master (class 2) The DP master, which is used as commissioning or diagnosis unit, usually a programming unit
DRIVECOM Group of more than 30 drive manufacturers. They have created uniform communication solutions for power transmission. A result
is a standardized drive profile “DRIVECOM profile drive technology 21“ (see Profile).
Fieldbus For the exchange of data between higher-level controls (hosts) and positioning controls (e. g. controllers).
Handshake Stipulated data-transfer method (here implemented by software).
Host PC or PLC
Icon Sign or symbol with an unambiguous message.
Index Parameter number according to the PROFIBUS and DRIVECOM definitions. If a parameter comprises several values (e. g. arrays and
records), they are addressed with an additional subindex.
InterBus-S Serial bus system of Phoenix Contact
Lenze code number see code number
Master see host/host system
Network topology Design and structure of a network: e.g. point-to-point network, line network, ring network)
Para me te r Adjustable controller variables and values addressable via codes
PCP channel By means of this communication channel, parameters can be transferred via PCP services following the PROFIBUS standard.
PCP service “Commands“ with which it is possible to transfer parameters according to the PROFIBUS standard.
Peripheral-bus module Bus participant in the peripheral bus
Peripheral-bus station Consists of bus terminal, peripheral-bus module and long-distance bus controller.
PNO PROFIBUS-Nutzerorganisation e.V. (PROFIBUS user organisation) Organisation for support and distribution of the PROFIBUS.
Processdata Small amounts of data (e.g. 2 bytes, DRIVECOM) for fast and cyclic transmission; e.g. setpoints and actual values
Process-data channel
(PCD channel)
Communication channel for fast and cyclic transmission of process data
PROFIBUS Communication standard DIN 19245 consisting of parts 1 to 3
Profile The word “profile“ originates from the communication standard DIN19245 and describes supplementary and restrictive
regulations, which are valid for industry groups or device groups.
The DRIVECOM-Nutzergruppe e. V. has standardized some important unit functions and summarized the results in the “DRIVECOM
profile drive technology 20“.
Slave Bus participant which is only allowed to transmit data after a request by a master. For instance, controllers are slaves. (See
Host/host system)
Show/Hide Bookmarks