User Manual

12 Visualisation with »VisiWinNET®«
12.4 Use the Direct driver "LogicAndMotionV3" (local visualisation)
101
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.4 Use the Direct driver "LogicAndMotionV3" (local visualisation)
We recommend the use of the "LogicAndMotionV3" direct driver for easy commissioning.
Start »VisiWinNET®«
Start the EASY »Navigator«
Start »VisiWinNET® Smart« by clicking the
Visualisation button.
 Note!
There is no OPC server available for PROFIBUS and PROFINET.
Controller c300/p300:
• The OPC communication for »VisiWinNET« is exclusively available for Controller p300
without
PLC.
• Otherwise, only the Lenze "Logic&Motion" direct driver can be used for the data
exchange between »VisiWinNET« and PLC.