User Manual

13 Parameter reference
13.2 Basic parameters of the Controllers 3200 C/c300 and p300/p500
155
Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C0169
C0172
C0173
C0174
C0180
Parameter | Name:
C0169 | WinCE users: User 10 with telnet permissions
Data type: UNSIGNED_8
Index: 24406
d
= 5F56
h
User may use telnet
Setting range (min. value | unit | max. value) Lenze setting
010
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0172 | FTP: Allow anonymous
Data type: UNSIGNED_32
Index: 24403
d
= 5F53
h
An unregistered user is allowed to log in. The user name is "anonymous"
• Entering "1" activates the log-in procedure
• Entering "0" deactivates the log-in procedure
Setting range (min. value | unit | max. value) Lenze setting
010
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0173 | FTP: Allow anonymous upload
Data type: UNSIGNED_32
Index: 24402
d
= 5F52
h
An anonymous user is allowed to upload data to the controller if parameter ...
• ... FtpAllowAnonymousUpload = true and
• ... FtpAllowAnonymous = true.
Setting range (min. value | unit | max. value) Lenze setting
011
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0174 | FTP: Enabled
Data type: UNSIGNED_32
Index: 24401
d
= 5F51
h
Activation of the FTP service
• Entering "1" activates the FTP service
• Entering "0" deactivates the FTP service
Setting range (min. value | unit | max. value) Lenze setting
011
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0180 | Telnet: Use authentication
Data type: UNSIGNED_32
Index: 24395
d
= 5F4B
h
The telnet user has to identify himself/herself with name and password when connecting.
• Entering "1" activates the log-in procedure
• Entering "0" deactivates the log-in procedure
Setting range (min. value | unit | max. value) Lenze setting
011
 Read access  Write access  CINH  PLC-STOP  No transfer