User Manual

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17 156
13 Parameter reference
13.2 Basic parameters of the Controllers 3200 C/c300 and p300/p500
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C0181
C0182
C0183
C0184
C0185
C0186
Parameter | Name:
C0181 | Telnet: Enabled
Data type: UNSIGNED_32
Index: 24394
d
= 5F4A
h
Activation of the telnet service
• Entering "1" activates the telnet service
• Entering "0" deactivates the telnet service
Setting range (min. value | unit | max. value) Lenze setting
011
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0182 | 0x100a: Software version
Data type: VISIBLE_STRING
Index: 24393
d
= 5F49
h
Software version of the backplane bus Controller
• Applies to Controllers 3200 C
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0183 | 0x1009: Hardware version/FPGA firmware version
Data type: VISIBLE_STRING
Index: 24392
d
= 5F48
h
Hardware version of the backplane bus Controller
• Applies to Controllers 3200 C
Version of the FPGA (Field Programmable Gate Array)
• Applies to Controllers p500
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0184 | 0x100a: Software version
Data type: VISIBLE_STRING
Index: 24391
d
= 5F47
h
Software version of the backplane bus master
• Applies to Controllers 3200 C
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0185 | 0x1009: Hardware version
Data type: VISIBLE_STRING
Index: 24390
d
= 5F46
h
Hardware version of the backplane bus master
• Applies to Controllers 3200 C
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C0186 | PLC: Licence
Data type: VISIBLE_STRING
Index: 24389
d
= 5F45
h
Licence level of the PLC. Possible licence levels are:
•No licence
• Logic (LPC1000)
• Motion (MPC1200)
 Read access  Write access  CINH  PLC-STOP  No transfer