User Manual

4 System structure
19 Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Note!
There is no OPC server available for PROFIBUS and PROFINET.
Controller c300/p300:
• The »EASY Starter« cannot
be used for these devices (in preparation).
• The OPC communication for »VisiWinNET« is exclusively available for Controller p300
without
PLC.
• Otherwise, only the Lenze "Logic&Motion" direct driver can be used for the data
exchange between »VisiWinNET« and PLC.